Steven Mooney Machinery

rss

Used and new machines recently added

Used Bode 1 T Rotilt Welding Positioner Used Bode 1 T Rotilt Welding Positioner
Refurbished Bode 1 Tonne Rotilt welding positioner . Manual tilt , variable speed rotation . Table diameter 920mm
Welding and Cutting Machinery
HAAS TL1 CNC Lathe HAAS TL1 CNC Lathe
New 2010. 3-jaw chuck, tooling, speeds to 2,000rpm, 203mm turning diameter, 762mm max turning length, Haas CNC, coolant (21160) POA
Lathes - CNC
HURCO VMX24i Vertical Machining Centre (2016) HURCO VMX24i Vertical Machining Centre (2016)
Traverses X Y Z: 610 x 508 x 610mm, table 762 x 508mm, spindle speed 40-8,000rpm, spindle taper CAT40, 24 ATC, coolant, rapid feedrates 24/30m/min, spindle motor power 12/9kW, low-volt light, Hurco control, coolant, swarf...
Machining centres
Ex Loan RLX 355 (2025) Ex Loan RLX 355 (2025)
[div class="dmach-acf-value "][p]• ProtoTRAK RLX Touchscreen Control[br /] • EPA (Enhanced ProtoTRAK Assistance)[br /] • 360mm Swing over bed[br /] • 225mm Swing over the cross slide[br /] • 1,000mm Between Centres[br /] • 52mm Spindle Bore[br /] •...
Lathes - general
XYZ SLX555 x 1.75M CNC Lathe with ProtoTrak SLX Control. Year 2015. Ref 30318 XYZ SLX555 x 1.75M CNC Lathe with ProtoTrak SLX Control. Year 2015. Ref 30318

Lathes - CNC
Myford super 7 lathe Myford super 7 lathe
Myford super 7 lathe with toooling
Lathes - general
Used XYZ 200TC (5023) Used XYZ 200TC (5023)
Used XYZ 200TC, 2002, s/n 0202036, Siemens Shopturn Control, 200mm 3-jaw chuck, 200mm turning dia, Max swing 420mm, Swing over carriage 330mm, X-travel 180mm, Z-travel 370mm, 12 stn VDI turret, Tailstock, Spindle bore 62mm, bar capacity 52mm,... With video
Lathes - CNC
XYZ ProtoTrak SMX5000 CNC/Manual Vertical Mill (2010) XYZ ProtoTrak SMX5000 CNC/Manual Vertical Mill (2010)
ProtoTrak SMX3 control, 1,930 x 356mm table, 1,524mm x 596mm table travel, 40 ISO taper, 40-5,000rpm, power drawbar.
Milling - NC/CNC
GUYSON Euro 4 Shot Blast Cabinet with Dust Extraction Unit. 1997 m/c. £1,850 GUYSON Euro 4 Shot Blast Cabinet with Dust Extraction Unit. 1997 m/c. £1,850

Shotblasting
BOMAR Ergonomic 320-250 DG Double-Mitre Horizontal Bandsaw. £2,950 BOMAR Ergonomic 320-250 DG Double-Mitre Horizontal Bandsaw. £2,950

Sawing - metal
MACH MDS 845-8T Toolroom VMC MACH MDS 845-8T Toolroom VMC
with DynaPath Wi-Fi enabled remotely supported control inc, 8-tool ‘around the spindle’ ATC, 8,000RPM. Superb! YOM 2023
Machining centres
2000 COLCHESTER VS2500 Gap Bed Centre Lathe 2000 COLCHESTER VS2500 Gap Bed Centre Lathe

Lathes - general
HERBERT 2D CAPSTAN LATHE HERBERT 2D CAPSTAN LATHE
Swing over bed 9", capstan slide stroke 9", admitted between chuck & capstan face 18 3/4", speeds 50-2550rpm, 6 station turret, toolpost, collet chuck & collets, 3 jaw chuck
Lathes - capstan and turret
Full Range of New and Used Positioners in Stock. All Sizes Available Full Range of New and Used Positioners in Stock. All Sizes Available

Welding and Cutting Machinery
Used Hardinge Bridgeport 1000XP/3 (4916) Used Hardinge Bridgeport 1000XP/3 (4916)
Used Hardinge Bridgeport 1000XP/3, 2007, s/n 320D307,Heidenhain TNC530i Control, Travels X-1,020mm, Y- 610mm Z-610mm, Table 1,200 x 600mm, BT40, 30ATC, 18.5KW Spindle power, 12,000RPM, Swarf conveyor.  With video
Machining centres
Demoor Hollow Spindle CNC Lathe 825-360 Demoor Hollow Spindle CNC Lathe 825-360
Machine will be fully run and checked complete with totally overhauled control system Key Specifications: • 14 1/4” Hollow Spindle • 39” Swing Over Bed • 26” Swing Over Saddle • 13.1 ft Maximum Turning Length Between Centres Control...
Lathes - CNC
Used Tombstone for CNC Horizontal Machining Centres (5059) Used Tombstone for CNC Horizontal Machining Centres (5059)
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 400mm. Cast Iron, Base size 485 x 485mm, working surface 350 x 490mm x 2 and 150 x 490mm x 2, Total height from bottom of the base 580mm, Full grid fixture on all faces
Misc
BRIDGEPORT-HARDINGE XR1000 Vertical Machining Centre (2017) BRIDGEPORT-HARDINGE XR1000 Vertical Machining Centre (2017)
Traverses X Y Z: 1,020 x 610 x 610mm, table size 1,200 x 600mm, table load 700kg, table to spindle 100-710mm, spindle taper BT40, spindle speed 12,000rpm, spindle motor 18.5kW, 30-station ATC, Heidenhain TNC530-, through spindle...
Machining centres
Ex Demo 500 LR (2026) MACH Exhibition Ex Demo 500 LR (2026) MACH Exhibition
[div class="dmach-acf-value "][p]• Siemens 828 with 10.4in Display[br /] • Siemens 20HP Spindle Motor[br /] • 10 – 8,000rpm (12,000rpm Optional)[br /] • 510mm X 400mm X 450mm Travels (X,Y,Z)[br /] • 12 Station Carousel Tool Changer[br /] •...
Misc
COLCHESTER / RICHMOND VMC 610L Vertical Machining Centre COLCHESTER / RICHMOND VMC 610L Vertical Machining Centre

Machining centres



Copyright Machinery Market a division of Countrywide Publications, registered in England No. 01460152 - Email us - Privacy policy