Bodor

rss

Category: Milling



Tos WH63 Tos WH63
Make: tos Type: horizontal-boring-mill-table-type Model: WH 63 Machine number: 082-09 Spindle diameter (mm): 63 Horizontal Spindle Travel (mm): 600 Longitudinal Travel (Z) (mm): 1300 Cross Travel (X) (mm): 800 Vertical Travel Headstock (Y)...
Milling
Giddings & Lewis Giddings & Lewis
Make: giddings-lewis Type: horizontal-boring-mill-table-type Model: G130T Machine number: 4101033 Spindle diameter (mm): 130 Horizontal Spindle Travel (mm): 914 Longitudinal Travel (Z) (mm): 1880 Cross Travel (X) (mm): 2770 Vertical Travel...
Milling
Tos W9A Tos W9A
Make: tos Type: horizontal-boring-mill-table-type Model: W9A Machine number: 012680 Spindle diameter (mm): 90 Horizontal Spindle Travel (mm): 710 Longitudinal Travel (Z) (mm): 1400 Cross Travel (X) (mm): 1250 Vertical Travel Headstock (Y)...
Milling
Pegard Flexivit 2 CNC Pegard Flexivit 2 CNC
Make: pegard Type: cnc Model: Flexivit 2 CNC Control: Siemens 840D Spindle diameter (mm): 130 Horizontal Spindle Travel (mm): 600 Longitudinal Travel (Z) (mm): 1750 Cross Travel (X) (mm): 3000 Vertical Travel Headstock (Y) (mm): 1750 Table...
Milling
Tos WHN 13.8B Tos WHN 13.8B
Make: tos Type: cnc Model: WHN 13.8B Machine number: 16-34 Control: Heidenhain TNC 150 Spindle diameter (mm): 130 Horizontal Spindle Travel (mm): 800 Longitudinal Travel (Z) (mm): 1250 Cross Travel (X) (mm): 3500 Vertical Travel Headstock...
Milling
Droop & Rein LFAS 130ke Droop & Rein LFAS 130ke
Make: droop-rein Type: cnc Model: LFAS 130ke Machine number: 3753 Control: Heidenhain TNC 430 Longitudinal Travel (X) (mm): 3000 Vertical Travel (Y) (mm): 1500 Cross Travel (Z) (mm): 1000 Table (mm): 4500 x 1600 Taper: iso-50-pdb Volts:...
Milling
Tos FGS50 CNC/B Tos FGS50 CNC/B
Make: tos Type: conventia Model: FGS 50 CNC/B Machine number: 23120007 Control: Heidenhain TNC 410 MA Longitudinal Travel (X (mm): 1100 Cross Travel (Y) (mm): 500 Vertical Travel (Z) (mm): 600 Table (mm): 500 x 1.250 Taper:...
Milling
Maho MH-C 2000 Maho MH-C 2000
Make: maho Type: nc Model: MH-C 2000 Machine number: 20225 Control: Philips Longitudinal Travel (X (mm): 1250 Cross Travel (Y) (mm): 1000 Vertical Travel (Z) (mm): 1000 Table (mm): 650 x 1.000 Taper: iso-50-pdb R.P.M. Spindle: 32 -...
Milling
Noble Lund P/RLMA Noble Lund P/RLMA
Make: asquith Type: cnc Model: P/RLMA Machine number: 6344P Table (mm): 1525 x 4876 mm Max. width between columns (mm): 1866 Daylight (mm): 1525 Taper: iso-50 Max. Load: 15 ton HP: 40 Volts: 400v Cycles: 50 [Ref: double-column-planer-mill...
Milling
Mecof CR15 NC Mecof CR15 NC
Make: arno Type: cnc Model: CR15 NC Machine number: 754 Control: ECS 2101 CNC Longitudinal Travel (X) (mm): 970 Vertical Travel (Y) (mm): 1630 Cross Travel (Z) (mm): 2970 Table (mm): 1200 x 3030 Taper: iso-50 Max. Load: 5000 R.P.M....
Milling
Butler Newall LE 20.000 Butler Newall LE 20.000
Make: asquith Type: conventia Model: LE 20.000 Machine number: 28386 Control: Heidenhain 530i Longitudinal Travel (X) (mm): 20000 Vertical Travel (Y) (mm): 2800 Cross Travel (Z) (mm): 1050 Taper: iso-50-pdb Auto Feed (mm): 2 - 2500 Rapid...
Milling
Zayer KFU 3000 Zayer KFU 3000
Make: zayer Type: cnc Model: KFU 3000 Machine number: 56024 Control: Heidenhain 355 Longitudinal Travel (X) (mm): 2700 Vertical Travel (Y) (mm): 1000 Cross Travel (Z) (mm): 1000 Table (mm): 1000 x 3000 Taper: iso-50-pdb R.P.M. Spindle: 35...
Milling
Zayer KCU 8000 Zayer KCU 8000
Make: zayer Type: conventia Model: KCU 8000 Control: Heidenhain TNC 355 Longitudinal Travel (X) (mm): 8000 Vertical Travel (Y) (mm): 2500 Cross Travel (Z) (mm): 1000 Taper: iso-50 R.P.M. Spindle: 20 - 1800 kW: 27,6 Volts: 380v Cycles:...
Milling
Heyligenstaedt FKSA 25 Heyligenstaedt FKSA 25
Make: heyligenstaedt Type: cnc Model: FKSA 25 Control: Fidia F1 / 234 Spindle diameter (mm): Ø 125 Taper: iso-50-pdb R.P.M. Spindle: 40 - 2000 kW: 15 Volts: 380v Cycles: 50 [Ref: cnc-bed-milling-machine-heyligenstaedt-fksa-25-11-295lh]
Milling
Zayer KCU 12000 Zayer KCU 12000
Make: zayer Type: conventia Model: KCU 12000 Control: Heidenhain TNC 415 Longitudinal Travel (X) (mm): 12000 Vertical Travel (Y) (mm): 2500 Cross Travel (Z) (mm): 1000 Taper: iso-50-pdb R.P.M. Spindle: 20 - 1800 kW: 37 Volts: 380v Cycles:...
Milling
Butler Newall Elgamill HENC / 8000 Butler Newall Elgamill HENC / 8000
Make: asquith Type: cnc Model: Elgamill HENC / 8000 Machine number: 28194 Control: Siemens Sinumerik 8 MC Longitudinal Travel (X) (mm): 6200 Vertical Travel (Y) (mm): 1070 Cross Travel (Z) (mm): 1000 Table (mm): 1030 x 8000 Taper:...
Milling
Burgsmuller VIWM 800-CNC Burgsmuller VIWM 800-CNC
Make: burgsmuller Type: cnc Model: VIWM 800-CNC Machine number: 2000/4533 Control: Siemens Sinumerik 840D R.P.M. Spindle: 200 - 3.200 Max. Load: 700 Chuck diameter (mm): 500 Max diameter (mm): 840 Spindle bore (mm): 70 Max height over bed...
Milling
Unisign Univers 4 Unisign Univers 4
Make: unisign Type: cnc Model: Univers 4 Control: Siemens Sinumerik 810D Table (mm): 700 x 400 Taper: iso-40 R.P.M. Spindle: 9000 Longitudinal Travel (mm): 1600 Cross Travel (mm): 400 Vertical Travel (mm): 400 Max. distance spindle -...
Milling
Klopp UFS 1000C Klopp UFS 1000C
Make: klopp Type: conventia Model: UFS 1000C Machine number: 5284 Control: Philips 3460 Table (mm): 2 x NC table 900 x 1.500 mm Taper: iso-50 R.P.M. Spindle: 35 - 3.550 Longitudinal Travel (mm): 5000 Cross Travel (mm): 800 Vertical Travel...
Milling
Kearny Tracker Modu-line (10.973 MD) Kearny Tracker Modu-line (10.973 MD)
Make: kaerny-trecker Type: conventia Model: Modu-line Machine number: M.S. 8891301 Control: KT-Gemini-D-61 Taper: iso-50-pdb R.P.M. Spindle: 4 - 2.400 Longitudinal Travel (mm): 1830 Cross Travel (mm): 762 Vertical Travel (mm): 1524 Auto...
Milling
DAH LIH MCV 720 DAH LIH MCV 720
Year of Manufacture: 2001 Type: cnc Model: MCV 720 Machine number: 7201927 Control: Heidenhain TNC 410 Table (mm): 950 x 460 Taper: iso-40 R.P.M. Spindle: 60 - 6000 Longitudinal Travel (mm): 720 Cross Travel (mm): 460 Vertical Travel (mm):...
Milling
Mazak-H630 Mazak-H630
Make: mazak Type: conventia Model: H630 Control: Mazatrol M-32A Color Table (mm): 630 x 630 Taper: iso-50 Longitudinal Travel (mm): 1000 Cross Travel (mm): 800 Vertical Travel (mm): 750 No. pallets: 6 kW: 21 Volts: 400v Cycles: 50 [Ref:...
Milling
Mondiale Viking 760 CNC Mondiale Viking 760 CNC
Year of Manufacture: new Make: mondiale Type: cnc Model: Viking 760 CNC Control: Siemens 828D Table (mm): 900 x 410 Taper: iso-40 R.P.M. Spindle: 0-8000 (10.000 option) Longitudinal Travel (mm): 460 Cross Travel (mm): 760 Vertical Travel... With video
Milling
Tos FGS25 32 Tos FGS25 32
Make: tos Type: teach-in Model: FGS 25/32 Machine number: 251301162 Longitudinal Travel (X (mm): 720 Cross Travel (Y) (mm): 360 Vertical Travel (Z) (mm): 420 Table (mm): 1000 x 320 Taper: iso-40 R.P.M. Spindle: 45-2240 (18x) kW:...
Milling
Mondiale HBM4 Mondiale HBM4
Year of Manufacture: new Make: mondiale Type: cnc Model: HBM 4 Control: Heidenhain 530i Spindle diameter (mm): 110 Horizontal Spindle Travel (mm): 550 Longitudinal Travel (Z) (mm): 1600 Cross Travel (X) (mm): 2200 Vertical Travel Headstock...
Milling
Tos W100 Tos W100
Make: tos Type: horizontal-boring-mill-table-type Model: W 100 Machine number: 208-10 Spindle diameter (mm): 100 Longitudinal Travel (Z) (mm): 1250 Cross Travel (X) (mm): 1600 Vertical Travel Headstock (Y) (mm): 1120 Table (mm): 1250 x...
Milling
CME CNC600 CME CNC600
Make: cme Type: conventia Model: CNC 800 Machine number: 077 Control: Heidenhain TNC 355 Longitudinal Travel (X (mm): 700 Cross Travel (Y) (mm): 500 Vertical Travel (Z) (mm): 500 Table (mm): 500 x 1000 Taper: iso-40-pdb R.P.M. Spindle:...
Milling
Anayak HVM 11000 P Anayak HVM 11000 P
Year of Manufacture: 2002 Make: ayce Type: cnc Model: HVM 11000P Control: Heidenhain TNC 430M Longitudinal Travel (X) (mm): 10500 Vertical Travel (Y) (mm): 2750 Cross Travel (Z) (mm): 1500 Table (mm): 2500 x 12000 Taper: iso-50-pdb R.P.M....
Milling
FIL 160 CNC FIL 160 CNC
Make: fil Type: cnc Model: 160 CNC Control: Heidenhain TNC 407 Longitudinal Travel (X) (mm): 1600 Vertical Travel (Y) (mm): 700 Cross Travel (Z) (mm): 850 Table (mm): 1950 x 650 Taper: iso-50 R.P.M. Spindle: 80 - 3000 kW: 23 Volts:...
Milling
Kafo VMC950 Kafo VMC950
Year of Manufacture: 1990 Make: kafo Type: cnc Model: VMC 950 Machine number: 26021 Control: Fanuc O-M Table (mm): 460 x 950 Taper: iso-40 R.P.M. Spindle: 4500 Longitudinal Travel (mm): 900 Cross Travel (mm): 500 Vertical Travel (mm):...
Milling
Tos WHN 13.B Tos WHN 13.B
Make: tos Type: cnc Model: WHN 13.B Machine number: 05-10 Control: ECS 2101 Spindle diameter (mm): 130 Longitudinal Travel (Z) (mm): 1300 Cross Travel (X) (mm): 3500 Vertical Travel Headstock (Y) (mm): 2000 Table (mm): 1800 x 1800 Taper:...
Milling
AXA VSC 0 1600 (11.601M1 ) AXA VSC 0 1600 (11.601M1 )
Year of Manufacture: 1991 Make: axa Type: cnc Model: VSC 0-1600 Machine number: 85046 Control: NUM 750 F R.P.M. Spindle: 30 - 3000 Longitudinal Travel (mm): 1600 Cross Travel (mm): 300 Vertical Travel (mm): 480 kW: 20 Volts: 400v Cycles:...
Milling
Mondiale Viking 3MA Mondiale Viking 3MA
Make: mondiale Type: teach-in Model: 3MA Longitudinal Travel (X (mm): 600 Cross Travel (Y) (mm): 210 Vertical Travel (Z) (mm): 425 Table (mm): 950 x 230 Taper: ns-40 R.P.M. Spindle: 31,5 - 1000 (16x) HP: 2 Volts: 400v Cycles: 50 [Ref:...
Milling
Ho-Chun UH-1250A Ho-Chun UH-1250A
Make: ho-chun Type: conventia Model: UH-1250A Machine number: 5123 Control: Heidenhain TNC 360 Longitudinal Travel (X (mm): 1250 Cross Travel (Y) (mm): 540 Vertical Travel (Z) (mm): 470 Table (mm): 400 x 1800 Taper: bt-50 R.P.M. Spindle:...
Milling
Mondiale Viking 890T Mondiale Viking 890T
Make: mondiale Type: teach-in Model: Viking 890T Longitudinal Travel (X (mm): 915 Cross Travel (Y) (mm): 400 Vertical Travel (Z) (mm): 420 Table (mm): 1370 x 254 Taper: iso-40 R.P.M. Spindle: 50 - 3550 kW: 3,6 Volts: 380v Cycles:...
Milling
Stanko 2A622 Stanko 2A622
Make: stanko Type: horizontal-boring-mill-table-type Model: 2A622 Machine number: 209 Spindle diameter (mm): 110 Horizontal Spindle Travel (mm): 710 Longitudinal Travel (Z) (mm): 1000 Cross Travel (X) (mm): 1250 Vertical Travel Headstock (Y)...
Milling
Union BFP125-1 Union BFP125-1
Make: union Type: conventia Model: BFP 125-1 Machine number: 7935/62 Spindle diameter (mm): 125 Horizontal Spindle Travel (mm): 1130 Longitudinal Travel Column (Z) (mm): 6000 Cross Travel Column (X) (mm): 400 Vertical Travel Headstock (Y)...
Milling
Colgar FRAL30 Colgar FRAL30
Make: colgar Type: 5-axis-cnc-travelling-column-milling-machine Model: FRAL 30 Machine number: 9509/90/A631 Control: E.C.S. 2351 Longitudinal Travel (X) (mm): 12000 Vertical Travel (Y) (mm): 2000 Cross Travel (Z) (mm): 1000 Table (mm): Ram...
Milling
Toyoda LineamIII Toyoda LineamIII
Make: toyoda Type: conventia Model: Lineam III Control: Meldas M650 Table (mm): 450 x 450 cm Taper: hsk-a63 Longitudinal Travel (mm): 630 Cross Travel (mm): 630 Vertical Travel (mm): 700 Max. distance spindle - table: 50 - 680 Max. Load:...
Milling
Hurco BMC 40 Hurco BMC 40
Make: hurco Type: cnc Model: BMC 40 Control: Ultimax III Table (mm): 1300 x 700 Taper: iso-40 R.P.M. Spindle: 30 - 4000 (inf. variable) Longitudinal Travel (mm): 1020 Cross Travel (mm): 762 Vertical Travel (mm): 560 kW: 7,5 - 5,5 Volts:...
Milling
Union BFT130 Union BFT130
Make: union Type: cnc Model: BFT 130 Control: Heidenhain TNC 155 Spindle diameter (mm): 130 Horizontal Spindle Travel (mm): 900 Longitudinal Travel (Z) (mm): 2455 Cross Travel (X) (mm): 2235 Vertical Travel Headstock (Y) (mm): 1970 Table...
Milling
Mikron WF 41 Mikron WF 41
Make: mikron Type: conventia Model: WF 41C Machine number: 41C.15.07 Control: Siemens Sinumerik 3M Longitudinal Travel (X (mm): 630 Cross Travel (Y) (mm): 500 Vertical Travel (Z) (mm): 460 Table (mm): 550 x 397 Taper: iso-40 R.P.M....
Milling
Union BFP130-5 Union BFP130-5
Make: union Type: conventia Model: BFP130-5 Machine number: 10.754 Spindle diameter (mm): 130 Horizontal Spindle Travel (mm): 1100 Longitudinal Travel Column (Z) (mm): 7000 Cross Travel Column (X) (mm): 350 Vertical Travel Headstock (Y)...
Milling
Zayer 5000CF Zayer 5000CF
Type: conventia Model: 5000CF Machine number: 70503 Control: SIEMENS Taper: iso-50 Distance between columns (mm): 5000 R.P.M. Spindle: 285 - 3000 Longitudinal Travel (mm): 5000 Cross Travel (mm): 800 Vertical Travel (mm): 800 Max diameter...
Milling
Mondiale HBM 3 Mondiale HBM 3
Make: mondiale Type: cnc Model: HBM 3 Machine number: 154001294 Control: FANUC 32iMB Spindle diameter (mm): 110 Horizontal Spindle Travel (mm): 550 Longitudinal Travel (Z) (mm): 1400 Cross Travel (X) (mm): 2000 Vertical Travel Headstock (Y)...
Milling
Soraluce Soramill SP12000 Soraluce Soramill SP12000
Type: cnc Model: Soramill SP12000 Machine number: 8523 Control: HEIDENHAIN TNC426-CA Longitudinal Travel (X) (mm): 10500 Vertical Travel (Y) (mm): 1600 Cross Travel (Z) (mm): 1200 Table (mm): 1100 x 12000 Taper: iso-50-pdb R.P.M. Spindle:...
Milling
Stanko 2620B Stanko 2620B
Make: stanko Type: horizontal-boring-mill-table-type Model: 2620B Machine number: 2488 Spindle diameter (mm): 90 Horizontal Spindle Travel (mm): 710 Longitudinal Travel (Z) (mm): 1090 Cross Travel (X) (mm): 1250 Vertical Travel Headstock (Y)...
Milling
Union BFT90-3 Union BFT90-3
Make: union Type: cnc Model: BFT 90-3 Machine number: 26247 Control: HEIDENHAIN TNC 320 Spindle diameter (mm): 102 Horizontal Spindle Travel (mm): 700 Longitudinal Travel (Z) (mm): 1500 Cross Travel (X) (mm): 1600 Vertical Travel Headstock...
Milling
Mondiale Viking 1MA Mondiale Viking 1MA
Make: mondiale Type: teach-in Model: Viking 1MA Longitudinal Travel (X (mm): 600 Cross Travel (Y) (mm): 210 Vertical Travel (Z) (mm): 425 Table (mm): 950 x 230 Taper: iso-40 R.P.M. Spindle: 31,5 - 1250 (16x) kW: 1,5 Volts: 400v Cycles:...
Milling
Zayer KF 5000 Zayer KF 5000
Make: zayer Type: cnc Model: KF5000 Machine number: 40.173 Control: Heidenhain TNC 355 Longitudinal Travel (X) (mm): 4700 Vertical Travel (Y) (mm): 1000 Cross Travel (Z) (mm): 1000 Table (mm): 1000 x 5000 Taper: iso-50-pdb R.P.M. Spindle:...
Milling
Zayer KF2200 Zayer KF2200
Make: zayer Type: cnc Model: KF2200 Machine number: 40.116 Control: Heidenhain TNC 355 Longitudinal Travel (X) (mm): 2200 Vertical Travel (Y) (mm): 1000 Cross Travel (Z) (mm): 1000 Table (mm): 1000 x 2200 Taper: iso-50-pdb R.P.M. Spindle:...
Milling
Deckel FP3A Deckel FP3A
Make: deckel Type: nc Model: FP3A Control: CNC 2102 Longitudinal Travel (X (mm): 500 Cross Travel (Y) (mm): 300 Vertical Travel (Z) (mm): 400 Table (mm): 600 x 400 Taper: iso-40 kW: 3 Volts: 380v Cycles: 50 [Ref: deckel-fp3a-freesmachine]
Milling
Abene VHF1 Abene VHF1
Type: teach-in Model: VHF1 Longitudinal Travel (X (mm): 600 Cross Travel (Y) (mm): 200 Vertical Travel (Z) (mm): 400 Table (mm): 1000 x 260 Taper: iso-40 R.P.M. Spindle: 40 - 1300 (12x) kW: 2 Volts: 380v Cycles: 50 [Ref:...
Milling
Mondiale Viking 1200T Mondiale Viking 1200T
Make: mondiale Type: teach-in Model: Viking 1200T Longitudinal Travel (X (mm): 1200 Cross Travel (Y) (mm): 580 Vertical Travel (Z) (mm): 600 Table (mm): 1575 x 425 Taper: iso-40 R.P.M. Spindle: 55 - 2580 (10x) kW: 5,5 Volts: 400v Cycles:...
Milling
Rambaudi Versamill Rambaudi Versamill
Type: cnc Model: Versamill 12 Machine number: 82601 Control: CNC Pilot Grundig Longitudinal Travel (X) (mm): 1100 Vertical Travel (Y) (mm): 820 Cross Travel (Z) (mm): 620 Table (mm): 1600 x 510 Taper: iso-50 R.P.M. Spindle: 22 - 2000 kW:...
Milling
Deber BTM 2500 Deber BTM 2500
Make: deber Type: cnc Model: BTM 2500 Machine number: 09/173 Control: Heidenhain TNC 407 Longitudinal Travel (X) (mm): 1100 Vertical Travel (Y) (mm): 1300 Cross Travel (Z) (mm): 2500 Table (mm): 2500 x 700 Taper: iso-50-pdb R.P.M. Spindle:...
Milling
Defum ADS 115 Defum ADS 115
Make: defum Type: horizontal-boring-mill-table-type Model: ADS 115 Machine number: 6861 Spindle diameter (mm): 115 Longitudinal Travel (Z) (mm): 2000 Cross Travel (X) (mm): 2000 Vertical Travel Headstock (Y) (mm): 2000 Table (mm): 1600 x...
Milling
Pegard AF 9 Pegard AF 9
Make: pegard Type: horizontal-boring-mill-table-type Model: AF 9 Spindle diameter (mm): 90 Longitudinal Travel (Z) (mm): 1600 Cross Travel (X) (mm): 1400 Vertical Travel Headstock (Y) (mm): 900 Table (mm): 1200 x 900 Taper: iso-40 R.P.M....
Milling
Wotan Rapid 3 Wotan Rapid 3
Make: wotan Type: cnc Model: Rapid 3 Machine number: 10211 Control: Siemens 820M Spindle diameter (mm): 160 Horizontal Spindle Travel (mm): 1.000 Longitudinal Travel (Z) (mm): 1600 Cross Travel (X) (mm): 2500 Vertical Travel Headstock (Y)...
Milling
Colgar FRAL 50 Colgar FRAL 50
Make: colgar Type: cnc Model: FRAL 50 Machine number: 880475A597 Control: Heidenhain TNC 155 QR Spindle diameter (mm): 130 Longitudinal Travel Column (Z) (mm): 1.000 Cross Travel Column (X) (mm): 10.000 Vertical Travel Headstock (Y) (mm):...
Milling
Wotan Rapid 2K Wotan Rapid 2K
Make: wotan Type: cnc Model: Rapid 2K Control: Siemens 840C Spindle diameter (mm): 130 Horizontal Spindle Travel (mm): 1.000 Longitudinal Travel Column (Z) (mm): 7.700 Cross Travel Column (X) (mm): 600 Vertical Travel Headstock (Y) (mm):...
Milling
Froriep FBT 160 280 Froriep FBT 160 280
Make: froriep Type: conventia Model: FBT 160 280 Machine number: 13.047 Spindle diameter (mm): 160 Horizontal Spindle Travel (mm): 1500 Cross Travel Column (X) (mm): 6400 Vertical Travel Headstock (Y) (mm): 4000 Taper: iso-50-pdb R.P.M....
Milling
Collet BF 200 Collet BF 200
Type: conventia Model: BF 200 Spindle diameter (mm): 200 Horizontal Spindle Travel (mm): 1650 Cross Travel Column (X) (mm): 8000 Vertical Travel Headstock (Y) (mm): 3000 Taper: iso-50 R.P.M. Spindle: 1,2 - 600 HP: 35 Volts: 380v Cycles:...
Milling
FPT Spazio 20 FPT Spazio 20
Make: fpt Type: cnc Model: Spazio 20 Machine number: B0003 Control: Heidenhain TNC 426/430MN Longitudinal Travel (X) (mm): 2000 Vertical Travel (Y) (mm): 800 Cross Travel (Z) (mm): 1500 Table (mm): 2200 x 750 Taper: iso-50-pdb R.P.M....
Milling
Wotan Rapid 3K Wotan Rapid 3K
Make: wotan Type: cnc Model: Rapid 3K Control: Siemens 850M Spindle diameter (mm): 160 Horizontal Spindle Travel (mm): 900 Longitudinal Travel Column (Z) (mm): 1000 Cross Travel Column (X) (mm): 9000 Vertical Travel Headstock (Y) (mm):...
Milling
Schiess Froriep 4BF 36-22,5 CNC Schiess Froriep 4BF 36-22,5 CNC
Year of Manufacture: 2006 Make: froriep Type: cnc Model: 4BF 36-22,5 CNC Control: Siemens 840D Spindle diameter (mm): 225 Horizontal Spindle Travel (mm): 1400 Cross Travel Column (X) (mm): 8000 Vertical Travel Headstock (Y) (mm): 5600 Ram...
Milling
Toshiba BTD-110R16 Toshiba BTD-110R16
Make: toshiba Type: cnc Model: BTD-110R16 Machine number: 411724 Control: Tosnuc 7-3 Spindle diameter (mm): 110 Horizontal Spindle Travel (mm): 710 Longitudinal Travel (Z) (mm): 2000 Cross Travel (X) (mm): 1500 Vertical Travel Headstock (Y)...
Milling
Mondiale HBM 4 Mondiale HBM 4
Year of Manufacture: 2009 Make: mondiale Type: cnc Model: HBM 4 Machine number: 094001167 Control: Heidenhain 530i Spindle diameter (mm): 110 Horizontal Spindle Travel (mm): 550 Longitudinal Travel (Z) (mm): 1600 Cross Travel (X) (mm):...
Milling
Droop & Rein LFAS 2000kc Droop & Rein LFAS 2000kc
Make: droop-rein Type: cnc Model: LFAS 2000kc Machine number: 05592 Control: Heidenhain TNC 530i Longitudinal Travel (X) (mm): 4000 Vertical Travel (Y) (mm): 2000 Cross Travel (Z) (mm): 1300 Table (mm): 5200 x 2000 Taper: iso-50-pdb R.P.M....
Milling
Droop & Rein FSM 1406 DA30KCN Droop & Rein FSM 1406 DA30KCN
Make: droop-rein Type: cnc Model: FSM 1406 DA30KCN Machine number: 06466 Control: Heidenhain TNC 530i Horizontal Spindle Travel (mm): 1500 Longitudinal Travel (X) (mm): 2400 Vertical Travel (Y) (mm): 1400 Cross Travel (Z) (mm): 1250 Table...
Milling
Droop & Rein FS 130gke Droop & Rein FS 130gke
Make: droop-rein Type: cnc Model: FS 130gke Machine number: 560722 Control: Heidenhain TNC 426CB Longitudinal Travel (X) (mm): 2000 Vertical Travel (Y) (mm): 1000 Cross Travel (Z) (mm): 1000 Table (mm): 2300 x 1200 Taper: iso-50-pdb R.P.M....
Milling
Droop & Rein FSM 12555 D30kf Droop & Rein FSM 12555 D30kf
Make: droop-rein Type: cnc Model: FSM 12555 D30kf Machine number: 05841 Control: Heidenhain TNC 426 Longitudinal Travel (X) (mm): 2800 Vertical Travel (Y) (mm): 1250 Cross Travel (Z) (mm): 1250 Table (mm): 5000 x 1255 Taper:...
Milling
Droop & Rein FWL 1600 Droop & Rein FWL 1600
Make: droop-rein Type: cnc Model: FWL 1600 Control: Heidenhain TNC 530i Spindle diameter (mm): 280 Longitudinal Travel (Z) (mm): 3500 Cross Travel (X) (mm): 2030 Vertical Travel Headstock (Y) (mm): 1500 Table (mm): 3000 x 1600 Taper:...
Milling
Scharmann Ecocut 1xz/TDV3 Scharmann Ecocut 1xz/TDV3
Make: scharmann Type: cnc Model: Ecout 1xz/TDV3 Control: Heidenhain TNC 530i Spindle diameter (mm): 125 Horizontal Sub Spindle Travel (mm): 600 Longitudinal Travel Column (Z) (mm): 7000 Cross Travel Column (X) (mm): 800 Vertical Travel...
Milling
Droop & Rein FPV 1400 SA30/13N Droop & Rein FPV 1400 SA30/13N
Make: droop-rein Type: cnc Model: FPV 1400 SA30/13N Machine number: 06312 Control: Heidenhain TNC 430 Table (mm): 2500 x 1400 Longitudinal Travel (mm): 3500 Cross travel milling head (mm): 2900 Max. width between columns (mm): 2000 Daylight...
Milling
Droop & Rein FPVL 2000 SA30/13KCN Droop & Rein FPVL 2000 SA30/13KCN
Make: droop-rein Type: cnc Model: FPVL 2000 SA30/13KCN Machine number: 560902 Control: Heidenhain TNC 530i Table (mm): 5000 x 2000 Longitudinal Travel (mm): 5300 Cross travel milling head (mm): 3300 Max. width between columns (mm):...
Milling
Droop & Rein FPVL 2000 SA30/30KCN Droop & Rein FPVL 2000 SA30/30KCN
Make: droop-rein Type: cnc Model: FPVL 2000 SA30/30KCN Machine number: 560873 Control: Heidenhain TNC 430 Table (mm): 5000 x 2250 Longitudinal Travel (mm): 5300 Cross travel milling head (mm): 2500 Max. width between columns (mm):...
Milling
Butler Elgamil Hi Power L Butler Elgamil Hi Power L
Make: asquith Type: conventia Model: Hi Power L Longitudinal Travel (X) (mm): 8000 Vertical Travel (Y) (mm): 1000 Cross Travel (Z) (mm): 1250 Taper: iso-50-pdb Volts: 400v Cycles: 50 [Ref: butler-elgamil-hi-power-l-12-077l-2]
Milling
Mondiale HBM-4T Mondiale HBM-4T
Make: mondiale Type: cnc Model: HBM 4-T Control: FANUC 31iMB Spindle diameter (mm): 130 Horizontal Spindle Travel (mm): 700 Longitudinal Travel (Z) (mm): 2000 Cross Travel (X) (mm): 3000 Vertical Travel Headstock (Y) (mm): 2000 Table (mm):...
Milling
Schiess Froriep 1FB180 Schiess Froriep 1FB180
Make: froriep Type: cnc Model: 1FB180 Control: Siemens Sinumerik 3 Longitudinal Travel Column (Z) (mm): 1400 Cross Travel Column (X) (mm): 8000 Vertical Travel Headstock (Y) (mm): 4000 Taper: iso-60 R.P.M. Spindle: 0-900 kW: 75 Volts:...
Milling
Scharmann Heavycut Scharmann Heavycut
Make: scharmann Type: cnc Model: Heavycut Control: Siemens 840C Longitudinal Travel Column (Z) (mm): 3300 Cross Travel Column (X) (mm): 8800 Vertical Travel Headstock (Y) (mm): 1200 Ram Travel (mm): 970 [Ref: scharmann-heavycut-12-774bh]
Milling
Pegard Precivit PBC 2 Pegard Precivit PBC 2
Make: pegard Type: cnc Model: Precivit PBC 2 Control: Siemens 840C Spindle diameter (mm): 130 Longitudinal Travel (Z) (mm): 3000 Cross Travel (X) (mm): 2000 Vertical Travel Headstock (Y) (mm): 1240 Table (mm): 1420 x 2000 R.P.M. Spindle: 16...
Milling
Union BFT 90/3-2 Union BFT 90/3-2
Make: union Type: cnc Model: BFT 90/3-2 Machine number: 08984-0 Control: Heidenhain TNC 320 Spindle diameter (mm): 102 Horizontal Spindle Travel (mm): 710 Longitudinal Travel (Z) (mm): 1.500 Cross Travel (X) (mm): 1.600 Vertical Travel...
Milling
Cincinnati 20 HC 2500 Cim-X-Changer Cincinnati 20 HC 2500 Cim-X-Changer
Make: cincinnati Type: conventia Model: 20 HC 2500 Cim-X-changer Machine number: 3127AD181-0015 Control: Fanuc 16-iM Table (mm): 750 x 2.500 Taper: iso-50-pdb R.P.M. Spindle: 20 - 3.300 Longitudinal Travel (mm): 2500 Cross Travel (mm):...
Milling
Union BFT 130-6 Union BFT 130-6
Make: union Type: horizontal-boring-mill-table-type Model: BFT 130-6 Spindle diameter (mm): 130 Longitudinal Travel (Z) (mm): 1200 Cross Travel (X) (mm): 3000 Vertical Travel Headstock (Y) (mm): 2500 Table (mm): 1800 x 2000 Taper:...
Milling
TOS WHN 13 TOS WHN 13
Make: tos Type: cnc Model: WHN 13 Control: Siemens Spindle diameter (mm): 130 Longitudinal Travel (Z) (mm): 1.120 Cross Travel (X) (mm): 2.200 Vertical Travel Headstock (Y) (mm): 1.600 Taper: iso-50 R.P.M. Spindle: 22,4 - 770 Volts:...
Milling
TOS FNK 25 Turret Milling Machine  Hin03 TOS FNK 25 Turret Milling Machine Hin03
TOS FNK 25 Turret Milling Machine, Year 1985, Serial No 11514, Mitutoyo KM 2 Axis DRO, table 49.5 " x 11.5" , 40 Int spindle, Manuals.Price £2500.00 Plus VAT, loaded Darwen BB3 3DF. [Ref: 106351]
Milling
TOS FNK 25 Turret Milling Machine  Hin04 TOS FNK 25 Turret Milling Machine Hin04
TOS FNK 25 Turret Milling Machine, Year 1986, Serial No 12580, Anilam Wizrd 2 Axis DRO, table 49.5 " x 11.5" , 40 Int spindle, Manuals.Price £2500.00 Plus VAT, loaded Darwen BB3 3DF. [Ref: 106353]
Milling
Bridgeport Turret Milling Machine 9x42" Table, R8 Spindle  Ptx Bridgeport Turret Milling Machine 9x42" Table, R8 Spindle Ptx
Bridgeport 42 x 9" Turret Milling Machine, Drip Tray, Coolant. Power to Cross and Long [Ref: 106367]
Milling
Bridgeport Turret Mill, 9x42" Table, Acurite DRO W3 Bridgeport Turret Mill, 9x42" Table, Acurite DRO W3
Bridgeport 42 x 9" Turret Mill , power feed, drip tray, lovo light coolant. [Ref: 106192]
Milling
Ajax Turret Milling Machine Model AJT 1, 10 x 50" Table AJT 1 Ajax Turret Milling Machine Model AJT 1, 10 x 50" Table AJT 1
Ajax Turret Milling Machine Model AJT 1, 10 x 50" Table, Serial No 34436 B50248, Power Feed In X, Sony Millman 2 Axis Digital Readout, 120mm Quill Travel, 3 HP Main SPindle Motor, 40 ISO Taper, 48-3750RPM  [Ref: 106258]
Milling
Bridgeport Turret Mill, 9x42"  Ptx Bridgeport Turret Mill, 9x42" Ptx
Bridgeport 42 x 9" Turret Milling Machine, Drip Tray, Coolant. [Ref: 106221]
Milling
Bridgeport Turret Mill, 9x42" Power In X Ptx Bridgeport Turret Mill, 9x42" Power In X Ptx
Bridgeport 42 x 9" Turret Milling Machine, Power Feed In X, Vari Speed Head, Drip Tray, Coolant. [Ref: 106254]
Milling
Butler T Type Elgamill Bed Type Mill   T Type Butler T Type Elgamill Bed Type Mill T Type
Butler Elgamill Bed Type Milling Machine, Anilam Microwizard 3 Axis DRO, Pendant Control, The T Type is a fixed column/moving table milling and boring machine with a ram type head mounted on a headslide which travels vertically on the column.TABLE...
Milling
PARKSON M1200 Series Vertical Mill M1200 PARKSON M1200 Series Vertical Mill M1200
PARKSON M1200 Series Vertical Mill, 49 x 12.5" table, 54-1950 RPM, 50Int Spindle, Swivel Adjustment of Head, LoVo Lamp, Crompton 5.5kW Electric Motor, Coolant To Spindle. Serial No. 72350Parkson M1200 Specification [Ref: 195]
Milling
Semco Model LC - 1 1/2 VS, 9 x 42" Table, Power In X,  LC1.5VS Semco Model LC - 1 1/2 VS, 9 x 42" Table, Power In X, LC1.5VS
Semco Model LC - 1 1/2 VS, 9 x 42" Table, Power In X, 2 Axis Newall DP7 Digital Readout., 120mm Spindle Stroke, Coolant, Note New bearings fitted in the head, new belt, runs quiet across the range. Serial No 50222079 - Price 3,000 plus VAT [Ref:...
Milling
XYZ 1500 Turret Milling Machine XYZ 1500 XYZ 1500 Turret Milling Machine XYZ 1500
XYZ 1500 Turret Milling Machine, 230 x 1070mm Table, Newall DP7 DRO, 60-4200RPM, Dove Ways, Serial No BE 3565, 6 Pcs of R8 Tooling Supplied, Riser Block. [Ref: 258]
Milling
XYZ, KRV 2000, 10 x 50" Table, Power to X Axis, Ex College KRV 2000 XYZ, KRV 2000, 10 x 50" Table, Power to X Axis, Ex College KRV 2000
XYZ, KRV 2000, 10 x 50" Table, Power to X Axis,  [Ref: 344]
Milling
Acra FM-2V Turret Milling Machine  FM-2V Acra FM-2V Turret Milling Machine FM-2V
Acra FM-2V Turret Milling Machine Specification3 Axes DROPower Air Draw BarPower FeedsTable - 230 x 1244mmLongitudinal Travel - 750mmCross Travel - 305mmVertical Travel (Knee) - 305mmTable T Slots (3) 16mmMax Workpiece Weight 340kgVertical Spindle...
Milling
Acra FM-5V Turret Milling Machine  FM-5V Acra FM-5V Turret Milling Machine FM-5V
Acra FM-5V Turret Mill 3 Axes DRO, Power Air Draw Bar, Power Feeds.Pendant ControlTable - 315 x 1470mmSquare WaysLongitudinal Travel - 890mmCross Travel - 390mmVertical Travel (Knee) - 430mmTable T Slots (3) 16mmMax Workpiece Weight...
Milling
XYZ Pro 3000 CNC Turret Milling Machine, Prototrak MX2 Control XYZ Pro 3000 XYZ Pro 3000 CNC Turret Milling Machine, Prototrak MX2 Control XYZ Pro 3000
XYZ Pro 3000 CNC Turret Milling Machine, Prototrak MX2 Control, Table 12 x 54", Powered Drawbar, Power to Knee [Ref: 106296]
Milling
Huron MU6 Milling Machine MU6 Huron MU6 Milling Machine MU6
Huron MU6 Universal Milling Machine, Serial No.721239 (1973), 2000mm x 460mm Table, 1450mm Longitudinal Travel, 700mm Cross Travel, 500mm Vertical Travel, 40ISO Spindle Taper, 30-2066rpm Spindle Speeds, 0-800mm/min Variable Long & Cross Feeds,...
Milling
2000mm x 700mm CNC Bed Miller. Heidenhain TNC 407 Control.  X = 2000mm, Y = 800mm, Z = 800mm. 2000mm x 700mm CNC Bed Miller. Heidenhain TNC 407 Control. X = 2000mm, Y = 800mm, Z = 800mm.
Manufacturer: CORREA Model: CF20/20 Serial No.: 9691612 Year of Manufacture: 1996 Control: Heidenhain TNC 407 Table Size: 2000mm x 700mm Table Load: 3.500 kg Longitudinal Travel, X axis: 2000mm Cross Travel, Y axis: 800mm Vertical Travel, Z...
Milling
2200mm x 800mm CNC Bed Miller. Fagor 8020M Control. X = 1820mm, Y = 750mm, Z = 800mm 2200mm x 800mm CNC Bed Miller. Fagor 8020M Control. X = 1820mm, Y = 750mm, Z = 800mm
Manufacturer: ZAYER Model: BF3000 Control: Fagor 8020M Table Size: 2200mm x 800mm with 5 x 22mm tee slots X Axis Travel: 1820mm Y Axis Travel: 750mm Z Axis Travel: 800mm Spindle Taper: ISO 50 Spindle Speeds: 1800 rpm Fitted with: Electronic...
Milling
3500mm x 1000mm CNC Bed Miller. Heidenhain 426 Control. X = 3000mm, Y = 1200mm, Z = 1000mm. 3500mm x 1000mm CNC Bed Miller. Heidenhain 426 Control. X = 3000mm, Y = 1200mm, Z = 1000mm.
Manufacturer: CORREA Model: A25/30 Serial No.: 9254008 Year of Manufacture: 1998 Control: Heidenhain 426 Table Size: 3500mm x 1000mm Table Load: 7000 kg Longitudinal Travel, X Axis: 3000mm Cross Travel, Y Axis: 1200mm Vertical Travel, ...
Milling
Universal Miller.  Table 1850mm x 560mm. X = 1800mm, Y = 700mm, Z = 800mm. Universal Miller. Table 1850mm x 560mm. X = 1800mm, Y = 700mm, Z = 800mm.
Manufacturer: FIL-AURORA Model: FA 150 Serial No.: 39 Year of Manufacture: 1979 Table size: 1850mm x 560mm Table left/right: 1800mm Table in/out: 700mm Speeds: 25 - 1200 rpm Horizontal, 24 - 1600 rpm Vertical. Input: 380/...
Milling
CNC Bed Miller.  Table 5000mm x 1200mm. 5 Axis Dual Heidenhain TNC 426 CNC Controls.  Fully Automatic Universal Head, with B & C Axis CNC Bed Miller. Table 5000mm x 1200mm. 5 Axis Dual Heidenhain TNC 426 CNC Controls. Fully Automatic Universal Head, with B & C Axis
Manufacturer: ANAYAK Model: HVM-5000 Serial No.: 971 203 Year of Manufacture: 1997 Control: Dual Heidenhain 426 31 Series Table Size: 5000mm x 1200mm X Travel: 4300mm Y Travel: 1500mm Z Travel / Vertical: 2500mm Head: Fully Automatic...
Milling
3000mm CNC Bed Miller. Auto Indexing Head.  Heidenhain TNC415 5 Axis Control. 3000mm CNC Bed Miller. Auto Indexing Head. Heidenhain TNC415 5 Axis Control.
Manufacturer: ZAYER Model: KFU-3000 Serial No.: 56,047 Year of Manufacture: 1990 Control: Heidenhain TNC 415 Table Size: 3000mm x 1000mm Table Load: 10,000 kgs Longitudinal Travel: 2703mm Ram In/Out Travel: 1015mm Vertical Travel:...
Milling
4000mm x 1000mm 5 Axis CNC Bed Miller.  Heidenhain TNC 430 CA control.  Programmable and Fully Indexing Milling Head & Tool Change. 4000mm x 1000mm 5 Axis CNC Bed Miller. Heidenhain TNC 430 CA control. Programmable and Fully Indexing Milling Head & Tool Change.
Manufacturer: ZAYER Model: 20 KFU x 4000 Serial No.: 29125 Year of Manufacture: 1999 Control: Heidenhain TNC 430 CA Reciprocating Table Size: 4000mm x 1000mm Table Load: 10,000 Kgs Longitudinal Travel: X = 3713 mm Cross Travel: Y = 1214...
Milling
Bridge Type CNC Miller With Heidenhain TNC 426 control.   Manufactured 2004 Bridge Type CNC Miller With Heidenhain TNC 426 control. Manufactured 2004
Manufacturer: CORREA Model: FP 30/30 Serial No.: 890204 Year of Manufacture: 2004 Control: Heidenhain TNC 426 Table size: 3000mm x 1250mm X Axis traverse: 2500mm Y Axis traverse: 2000mm Z Axis traverse: 800mm Spindle taper: ISO 50 Input:...
Milling
Horizontal CNC Boring & Milling Machine. Heidenhain iTNC 530 Control.  Manufactured 2008 Horizontal CNC Boring & Milling Machine. Heidenhain iTNC 530 Control. Manufactured 2008
Manufacturer: ANAYAK Model: VHPlus-3000-MG Serial No.: 200056 Year of Manufacture: 2008 Control: Heidenhain iTNC 530 Table Size: 2000mm x 1600mm Table Rotation : .0001 Degrees continuous @ 360 degrees Weight on Table: 13,000 kgs Longitudinal...
Milling
Bridge Type CNC Miller.  Heidenhain iTNC 530 Control, Table 4000 mm x 1250 mm,  X  = 3500 mm, Y = 2000 mm, Z = 800 mm, Manufactured 2005 Bridge Type CNC Miller. Heidenhain iTNC 530 Control, Table 4000 mm x 1250 mm, X = 3500 mm, Y = 2000 mm, Z = 800 mm, Manufactured 2005
Manufacturer: CORREA Model: FP 30/35 Serial No.: 890216 Year of Manufacture: 2005 Control: Heidenhain iTNC 530 Table size: 4000mm x 1250mm Between columns: 1740mm Spindle taper: ISO 50 Input: 400/3/50hz . Main power 44kW Speeds: 5000 rpm,...
Milling
5500mm x 950mm CNC Bed Miller. Heidenhain 3 axis TNC 415 Control.  X = 5000mm, Y = 1200mm, Z = 2000mm 5500mm x 950mm CNC Bed Miller. Heidenhain 3 axis TNC 415 Control. X = 5000mm, Y = 1200mm, Z = 2000mm
Manufacturer: CME Model: FCM-5000 Serial No.: 2317 Year of Manufacture: 1994 Control: Heidenhain TNC415 Table Size: 5500mm x 950mm Longitudinal Travel: X Axis - 5000mm Cross Travel: Y Axis - 1200mm Vertical Travel: Z Axis -...
Milling
Starrag HX 151 Milling Machine Center Starrag HX 151 Milling Machine Center
This Starrag HX 151 Milling Machine Center manufactured in Germany in the year 2004. Operated through a Siemens 840D control unit. This machine can work with a spindle speed up to 15000 rpm and a blade length max of 700 mm. [Ref:...
Milling
Faro Vantage Laser Tracker Measuring Machine Faro Vantage Laser Tracker Measuring Machine
This Faro Vantage Laser Tracker Measuring Machine was made in the year 2014 in United States. This machine has a maximum measuring range with selected targets of 80 m and a maximum range with SMR of 1/2 in. 30m. [Ref: ES-MEA-FAR-2014-00001]
Milling
CME FCM 6000 Milling Machine CME FCM 6000 Milling Machine
This CME FCM 6000 Milling Machine was manufactured in the year 2000. It is equipped with a HEIDENHAIN TNC 426 CB control unit. This 4 axis machine works with a spindle speed 3000 rpm. It presents very good working conditions, as it was well...
Milling
DYE FBF-C-N/C Milling Machine DYE FBF-C-N/C Milling Machine
This DYE FBF-C-N/C Milling Machine was built in 1986. This 3 axis machine has a spindle speed up to 2000 rpm, a table dimension of 2000 x 1500 mm. It is a robust machine. [Ref: ES-MIL-DYE-1986-00003]
Milling
MTE BF-1700 Milling Machine MTE BF-1700 Milling Machine
This MTE BF-1700 Milling Machine was built in the year 1996. It is operated through a Fagor control unit. This model counts with a spindle speed range 40 - 2500 rpm. [Ref: ES-MIL-MTE-1996-00001]
Milling
Heckert FSS450MR Vertical Milling Machine Heckert FSS450MR Vertical Milling Machine
This Heckert FSS450MR Vertical Milling Machine was made in 2015 in Germany. It has been working for only 250 hours. This axis machine is equipped with a control unit of the same brand, and can work with a spindle speed up to 1350 rpm. [Ref:...
Milling
ANAYAK HVM-6000 multiangular head Milling Machine ANAYAK HVM-6000 multiangular head Milling Machine
This ANAYAK HVM-6000 multiangular head Milling Machine was built in 2001 in Spain. It has been on for 15739 hours, of which 6542 are program run hours. With an HEIDENHAIN control unit, this 5 axis machine can works with a spindle speed range of 60 -...
Milling
Lagun GBR3 Milling Machine Lagun GBR3 Milling Machine
This Lagun GBR3 Milling Machine, fabricated in Spain in 2014. This 3 axis machine has a table dimensions of 3100 x 1000 mm, counts with a spindle speed up to 4000 rpm, and a rotating head 2,5º in 2,5º. [Ref: PT-MIL-LAG-2014-00001]
Milling
HAAS VR–11BHE Milling Machine HAAS VR–11BHE Milling Machine
This HAAS VR–11BHE Milling Machine was manufactured in 2003 in the United States. The spindle was changed in 2019, and since then had worked 5700 hours. This machine is operated through a control unit of the same brand. It works with a spindle speed...
Milling
FAMUP COBO 3000 Milling Machine FAMUP COBO 3000 Milling Machine
This FAMUP COBO 3000 Milling Machine was manufactured in the year 2001. Operated through a FANUC 21Im control unit. This machine can work with a spindle speed up to 8000 rpm and has a chip conveyor with belt. This machine has 4 axis. [Ref:...
Milling
Waldrich Siegen V/H-AR Milling Machine Waldrich Siegen V/H-AR Milling Machine
This Waldrich Siegen V/H-AR Milling Machine of German manufacture dates from the year 1990, and is equipped with a NUM 760 Control unit. This machine stands out through its robustness and great working capacity: the V/H-AR is able to work on almost...
Milling
Okuma Mx-45VAE Okuma Mx-45VAE
This Okuma Mx-45VAE Milling Machine was manufactured in Japan in 1998. This 4 axis machine has a record of 32368 hours, of which only 9577 are spindle hours. It is operated through an OKUMA OSP700M. This machine can work with a spindle speed up to...
Milling
MTcut V220P MTcut V220P
This MTcut V220P milling machine was manufactured in the year 2016. It has been on for 20112 hours, of which 4860 are spindle hours. It is operated with a Heidenhain iTnc 530 SmarT.NC HSCI control unit. This 3 axis machine has a spindle speed up to...
Milling
KAOMING KMC-3000SV Milling Machine KAOMING KMC-3000SV Milling Machine
This KAOMING KMC-3000SV Milling Machine was manufactured in year 2012. It is equipped with a FANUC Series 18i-MB control unit. This 3 axis machine is capable of working with a spindle speed up to 8000 rpm. [Ref: KR-MIL-KAO-2012-00001]
Milling
INGERSOL BOHLE Master Center T1 INGERSOL BOHLE Master Center T1
This INGERSOL BOHLE Master Center T1 Milling Machine was manufactured in the year 1991. It is equipped with a Siemens 840 D control unit. This 5 axis machine is capable of working with a spindle speed 40-4000 rpm, and a table surface 3000x1500 mm. ...
Milling
Matsuura MC-900HG Milling Machine Matsuura MC-900HG Milling Machine
This Matsuura MC-900HG Milling Machine was manufactured in Japan in the year 1999. It has been working for approximately 69700 hours. It is operated through a Fanuc Series 16i-M control unit. This machine counts with a spindle speed range up to...
Milling
FPT Stinger Milling Machine FPT Stinger Milling Machine
This FPT Stinger Milling Machine was built in 2005 in Italy. It is equipped with a Heidenhain TNC 530 control unit. This machine can work with a spindle speed up to 18000 rpm. [Ref: IT-MIL-FPT-2005-00001]
Milling
Rambaudi Rammatic 804 Rambaudi Rammatic 804
This Rambaudi Rammatic 804 Milling Machine was built in 1992. It has been working for 20987 hours. Equipped with a Heidenhain iTNC 530 control unit. This machine incorporates a spindle speed range 40-3600 rpm. [Ref: DE-MIL-RAM-1992-00001]
Milling
ANAYAK PERFORMER-2500 Milling ANAYAK PERFORMER-2500 Milling
This ANAYAK PERFORMER-2500 Milling was manufactured in Spain in the year 2008. It has a working record of 20000 hours. This 4 axis machine is operated through a HEIDENHAIN TNC530 control unit. It can work with a spindle speed range between 10 - 3500...
Milling
BIESSE ROVER B FT 2264 Milling machine BIESSE ROVER B FT 2264 Milling machine
This BIESSE ROVER B FT 2264 Milling machine was manufactured in Italy in 2016. It is operated through a Bsolid Bsuite3 control unit. This 5 axis machine is suitable for wood or aluminium. It works with a motor power of 11 kW and a spindle speed up...
Milling
AXA VSC 2 Milling Machine AXA VSC 2 Milling Machine
This AXA VSC 2 Milling Machine was manufactured in the year 1999 in Germany. It is equipped with a Heidenhain TNC 407 control unit. This 4 axis machine counts with various SK40 holders, also a dividing head and swivel bridge with a counterholder and...
Milling
AXA VHC 3M/2E Milling Machine AXA VHC 3M/2E Milling Machine
This AXA VHC 3M/2E Milling Machine was manufactured in the year 2003 in Germany. It is equipped with a Heidenhain control unit. This 3 axis machine works with a spindle speed up to 6000 rpm and a spindle power of 17 KW. Includes a swivel head...
Milling
Optimum F105 Milling machine Optimum F105 Milling machine
This Optimum F105 Milling machine was manufactured in 2014 in Germany. This 3 axis machine works with a spindle speed between 10 - 8000 rpm. It is in very good condition. [Ref: DE-MIL-OPT-2014-00001]
Milling
KIHEUNG KNC U-800 Milling Machine KIHEUNG KNC U-800 Milling Machine
This KIHEUNG KNC U-800 Milling Machine was manufactured in the year 1998 en Korea. This machine operates through a HEIDENHAIN TNC426 control unit. It has a spindle speed up to 3000 rpm and a table dimmension of 2300 x 800 mm. [Ref:...
Milling
OPS-INGERSOLL 650 Milling machine OPS-INGERSOLL 650 Milling machine
This OPS-INGERSOLL 650 Milling machine was manufactured in the year 2007. It has approximately 22000 spindle hours. This 5 axis machine is equipped with an Andronic 2060 control unit. It can works with a spindle speed range between 1 - 42000 rpm....
Milling
KIHEUNG U1200N Bed-Type Milling Machine. POA KIHEUNG U1200N Bed-Type Milling Machine. POA
Heidenhain i-TNC 640 control, table 3,600 x 1,050mm, taper ISO #50, X=3,100, Y=1,250, Z=1,350mm, max speed 4,000rpm New Machine Due in Soon Web image for reference only
Milling
AJAX MODEL 2A Mk V UNIVERSAL MILLING  MACHINE (12646) AJAX MODEL 2A Mk V UNIVERSAL MILLING MACHINE (12646)
AJAX MODEL 2A Mk V UNIVERSAL MILLING MACHINE Swivel Table Size 1250mm x 280mm : Longitudinal Travel 900mm : Cross Travel 300mm : Vertical Travel 500mm : Spindle Taper 40 ISO : Spindle Speeds 35 - 1800rpm Variable : Power Feeds & Rapids to X,Y &...
Milling
ADCOCK & SHIPLEY 1ESG HORIZONTAL MILL (12647) ADCOCK & SHIPLEY 1ESG HORIZONTAL MILL (12647)
ADCOCK & SHIPLEY 1ESG HORIZONTAL MILL 40 Int. Spindle : 18 Speeds 50 - 2500 rpm : Table 30" x 8" : Power Feeds Long. : Arbor Support & Arbor : Low Volt Light : Coolant & Cutter Guard.
Milling
Tornomat 2 Tornomat 2
Tornamat 2 (98)
Milling
Tornomat 2 Tornomat 2
Tornamat 2 (103)
Milling
Tornomat 2 Tornomat 2
Tornomat 2 (97)
Milling
Tornomat 2 Tornomat 2
Tornomat 2 (145)
Milling
AHCOL ROTAMILL AHCOL ROTAMILL
AHCOL Rotamill
Milling
Bridgeport 1S Bridgeport 1S
Bridgeport 1S Milling machine.
Milling
Ajax AJT400 Turret Mill (3699) Ajax AJT400 Turret Mill (3699)
Ajax AJT400 Turret Mill, 2018, s/n 41509, Newall 3 axis DRO, 40 int power drawbar, power feed long, rapids vertical, vice, tooling, table 1374 x 254mm, trav 870 (750 power) x 430 x 400mm power, 50-3750rpm, 5hp
Milling
XYZ1500 Belt Head Turret Mill EXCELLENT CONDITION - L10209.02 XYZ1500 Belt Head Turret Mill EXCELLENT CONDITION - L10209.02
PRICE: £4,750 + VAT Manufacturer XYZ Model XYZ-1500 Belt Head Turret Milling Machine Spindle: R8 Spindle Travel: 125mm (5") Table Size: 1065 x 230mm (42" x 9") Longitudinal Traverse: 710mm (28") Cross...
Milling
XYZ 1500 Vari-Speed Turret MIll. -  L20223.01 XYZ 1500 Vari-Speed Turret MIll. - L20223.01
PRICE: £5,950.00 + VAT Manufacturer XYZ Model XYZ 1500 Vari Speed Turret Milling Machine Table: 1065 x 230 mm 42” x 9” Long travel 710 mm 28” Cross travel 305 mm 12” Vertical traverse 405 mm 16” Quill travel 125 mm...
Milling
XYZ 1500 Belt-Head Turret Mill. - L10209.02 XYZ 1500 Belt-Head Turret Mill. - L10209.02
PRICE: £4,750.00 + VAT Manufacturer XYZ Model XYZ-1500 Belt Head Turret Milling Machine Spindle: R8 Spindle Travel: 125mm (5") Table Size: 1065 x 230mm (42" x 9") Longitudinal Traverse: 710mm (28") Cross...
Milling
Pinnacle PKTM 380VA Vari Speed Turret Mill - L11107.03 Pinnacle PKTM 380VA Vari Speed Turret Mill - L11107.03
PRICE: £5,350 + VAT anufacturer Pinnacle Model PKTM 380VA variable speed turret milling machine Spindle: R8 Table Size: 1370 x 250mm (54" x 10") Equipment: Power Long Feed Newall 2 Axis DRO – no warranty on used digital...
Milling
ZAYER BF2500 Bed-Type Mill. Digital ZAYER BF2500 Bed-Type Mill. Digital

Milling
HURON RU 771 Bed-Type Mill. Digital, travels 2,500 x 1,000mm HURON RU 771 Bed-Type Mill. Digital, travels 2,500 x 1,000mm

Milling
AJAX AJT4 Heavy Duty Turret Mill AJAX AJT4 Heavy Duty Turret Mill
Table 54in x 11in, 40 International spindle, 3hp, belt head, power feed and rapids to all axes, 3-axis DRO
Milling
TOS KURIM FNK25A TURRET MILL (12616) TOS KURIM FNK25A TURRET MILL (12616)
TOS KURIM FNK25A TURRET MILL 40 Int. Spindle : 16 Speeds 56 - 4500 rpm : Table 49" x 11" : Power Feeds & Rapids In All Directions : 2 Axis DRO : Low Volt Light : Coolant & Splash Tray.
Milling
CINCINNATI MILACCRON 420 CINEDO VERTICAL MILL (12618) CINCINNATI MILACCRON 420 CINEDO VERTICAL MILL (12618)
CINCINNATI MILACCRON 420 CINEDO VERTICAL MILL 50 Int. Spindle : 24 Speeds 16 - 1600 rpm : Table 80" x 16" : Power Feeds & Rapids In All Directions : Power Feeds & Rapids to Spindle : Mitutoyo DRO : Pendant Control : Coolant & Tooling.
Milling
Bridgeport Series 1 Vari Speed Turret Mill - L20222.04 Bridgeport Series 1 Vari Speed Turret Mill - L20222.04
£7,950.00 + VAT Manufacturer Bridgeport Milling Table size 1065 x 230 mm 42” x 9” Longitudinal Traverse Hand – 760 mm 30” Power – 675 mm 26 ½” Cross Traverse 305 mm 12” Vertical Traverse 405 mm 16” Number of Tee...
Milling
ELLIOTT Sturdimill 1250 Universal Mill ELLIOTT Sturdimill 1250 Universal Mill
50in x 10½in swivel table, 31.5-1,400rpm, 40 Int compound vertical head. £3,750
Milling
AJAX Turret Miller. 49-2,440rpm, 40 Int, 2-axis DRO. £2,750 AJAX Turret Miller. 49-2,440rpm, 40 Int, 2-axis DRO. £2,750

Milling
RAMBAUDI Ram Mill Heavy Duty Kneeless Mill. 63 x 20in table, DRO. POA RAMBAUDI Ram Mill Heavy Duty Kneeless Mill. 63 x 20in table, DRO. POA
Choice of 2.
Milling
TOS FNK25A Turret Mill (3683) TOS FNK25A Turret Mill (3683)
TOS FNK25A Turret Mill, 1989, s/n15314, Imerial dials, table 1250 x 290mm, trav 800 x 350 x 420mm vert x 125mm quill, feeds & rapids long & cross, rapids vertical, Mitutoyo DRO
Milling
Butler Elgamill 5000mm Manual Bed Mill Butler Elgamill 5000mm Manual Bed Mill
Butler Elgamill 5000mm Manual Bed Mill 1200mm x 5000mm T Slotted Bed 1500mm Vertical Digital Readout Universal Head
Milling
XYZ Edge CNC Turret Mill (3693) XYZ Edge CNC Turret Mill (3693)
XYZ Edge CNC Turret Mill, 2007, s/n 0507038, ProtoTRAK Edge Control, table size 1270 x 254mm, trav 762 x 406 x 406mm, quill travel 127mm, R8 taper
Milling
C-Tek Powercentre KM180 CNC Bed Mill (3695) C-Tek Powercentre KM180 CNC Bed Mill (3695)
C-Tek Powercentre KM180 CNC Bed Mill, 2010, C-TEK PC Based Conversational Control, Table 2,100 x 450mm, Travels X-1,800, Y-650, Z620mm, 60 to 6,000rpm, BT40
Milling
XYZ SMX3500 Bed Mill (3353) XYZ SMX3500 Bed Mill (3353)
XYZ SMX3500 Bed Mill, 2013 s/n 11902, Prototrak SMX3 CNC control, table 1372mm x 355mm, Trav 762 x 508 x 58mm, power drawbar 40int, Options - TBC
Milling
BRIDGEPORT BRJ TURRET MILL  (12597) BRIDGEPORT BRJ TURRET MILL (12597)
BRIDGEPORT BRJ TURRET MILL R8 Spindle : 16 Speeds 67 - 4600 rpm : Belt Change Head : Table 48" x 9" : Power Feeds Long. : Newall 2 Axis DRO.
Milling
CINCINNATI 310 Cinedo Universal Mill with Power Overarm. POA CINCINNATI 310 Cinedo Universal Mill with Power Overarm. POA

Milling
KEARNEY & TRECKER Milwaukee Model 3CE Universal Milling Machine KEARNEY & TRECKER Milwaukee Model 3CE Universal Milling Machine
Table size 67 x 15in, spindle taper 50 Int, spindle speeds 25-1,300rpm. Large amount of tooling. Ex college
Milling
Fully Refurbished BRIDGEPORT Turret Milling Machine with 3-Axis DRO Fully Refurbished BRIDGEPORT Turret Milling Machine with 3-Axis DRO

Milling
XYZ SMX2500 Bed Mill (3522) XYZ SMX2500 Bed Mill (3522)
XYZ SMX2500 Bed Mill, 2016 s/n:- 501291, SMX Control, table 1245 x 228mm, trav 780 x 390 x 560mm, 3HP head, R8 spindle taper, power drawbar, Features - Advanced Features, Network, Traking
Milling
MACH VS-1 Turret Mill with 3HP vari-speed R8 spindle MACH VS-1 Turret Mill with 3HP vari-speed R8 spindle
2-axis DRO, 49 x 9” table, power feed to X-axis. As new! YOM 2015 Choice of 2
Milling
RAMBAUDI Ram Mill Kneeless Miller RAMBAUDI Ram Mill Kneeless Miller

Milling
TRYAX CM40 CNC Turret Mill TRYAX CM40 CNC Turret Mill

Milling
UNIPRIZE UTM 4VS Turret Mill UNIPRIZE UTM 4VS Turret Mill

Milling
BRIDGEPORT Interact 720H BRIDGEPORT Interact 720H
Year 1989. Heidenhain control. Weight 3,680kg
Milling
BRIDGEPORT 42 x 9in Turret Mill BRIDGEPORT 42 x 9in Turret Mill
Power feed, drip tray, lo-vo light, coolant
Milling
TOS FNK25A Tool Room Knee Type Milling Machine #78578 TOS FNK25A Tool Room Knee Type Milling Machine #78578
TOS FNK25A Tool Room Knee Type Milling Machine Table Size 1250 x 290mm Table Clamping Slots (Width x Pitch) 14 x 80mm Longitudinal Table Travel 800mm Transversal Table Travel 360mm Table Vertical Travel 460mm Spindle Taper 40INT Spindle Speed...
Milling
XYZ SMX 2500 with ProtoTrak SMX control XYZ SMX 2500 with ProtoTrak SMX control
Serial no. E00421. Year 2009
Milling
BRIDGEPORT Interact 1 Mk 2 BRIDGEPORT Interact 1 Mk 2
Heidenhain TNC370 control, travels 660 x 305 x 125mm, table 1,270 x 400mm, spindle speeds 4,000rpm, ISO 30, 4th axis indexer
Milling
BRIDGEPORT BJ2 Vari-Speed Turret Mill BRIDGEPORT BJ2 Vari-Speed Turret Mill
Table 42in x 9in, R8 spindle. C/w DRO & tooling
Milling
XYZ PRO 1500 (3565) XYZ PRO 1500 (3565)
XYZ PRO 1500, MX2, 1997, s/n95006, MX2 2 Axis Control, Table size 1066 x 228mm, trav 660 x 330mm, 3hp
Milling
Bridgeport BR2J2 Turret Mill (3635) Bridgeport BR2J2 Turret Mill (3635)
Bridgeport BR2J2 Turret Mill, Rebuilt 2019, table 1065 x 230 mm , trav 675 x 305 x 127mm, Newall NMS300 DRO, Power Feed Long, coolant, Drip tray
Milling
HURON PU 771 Bed-Type Milling Machine HURON PU 771 Bed-Type Milling Machine
Table 2,250mm x 700mm, 50 Int spindle, travels 1,900 x 1,000 x 1,000mm, Anilam 2-axis DRO
Milling
Adcock & Shipley 1 ESG Universal Milling Machine #78346 Adcock & Shipley 1 ESG Universal Milling Machine #78346
Adcock & Shipley 1 ESG Universal Milling Machine Horizontal 40 INT Taper With Arbor & Support Vertical Head 40 INT Taper Spindle Speeds 50 - 2500 rpm Table Size 30” x 8” Power Feed To Table Long (X) Coolant 3 Phase Electrics
Milling
Downham Mini Borer - Mill - Drill - Bore #78349 Downham Mini Borer - Mill - Drill - Bore #78349
Downham Mini Borer Spindle Speeds 180 - 4000rpm T Slotted 450 X 180mm Table British Crafted - Excellent Condition Perfect For Home Workshop #78349 £2,950 + VAT
Milling
Lilian 3VH Turret Milling Machine #78550 Lilian 3VH Turret Milling Machine #78550
Lilian 3VH Turret Milling Machine Variable Spindle Speeds 60 – 4200 rev/min Spindle Taper R8 2 Axis Digital Read Out (X & Y Axis) X Axis Power Feed Mitutoyo 2 Axis DRO Table Size 1270 x 254mm Coolant www.jetmachinery.co.uk Jet Machinery...
Milling
BRIDGEPORT Variable Speed Turret Milling Machine BRIDGEPORT Variable Speed Turret Milling Machine
Fully rebuilt 2019. POA
Milling
HURON NU5 Universal Mill HURON NU5 Universal Mill
Table 1,500mm x 460mm, long travel 1,300mm, spindle 40 Int. C/w DRO, interlock guard and lights
Milling
MACH VS-1 Manual Turret Mill with 2-axis DRO MACH VS-1 Manual Turret Mill with 2-axis DRO
Power feed to X-axis, coolant equipment, stand on style splash tray. YOM 2016 Immaculate!
Milling
CNC Boring and Milling Centre EDEL, Revocenter 4004, 1996, Siemens Sinumerik 810 D CNC Boring and Milling Centre EDEL, Revocenter 4004, 1996, Siemens Sinumerik 810 D

Milling
XYZ 2000 Milling Machine with Newall C80 Digital Readout. Ref 28873 XYZ 2000 Milling Machine with Newall C80 Digital Readout. Ref 28873

Milling
ELLIOTT 18S SHAPER (12560) ELLIOTT 18S SHAPER (12560)
ELLIOTT 18S SHAPER 450mm Stroke : 4 Speeds : Power Feeds : Universal Table : Shaper Vice.
Milling
Refurbished Hardinge Bridgeport Turret Milling Machine #78469 Refurbished Hardinge Bridgeport Turret Milling Machine #78469
Refurbished Bridgeport Vari-Speed Turret Milling Machine Variable Speed Head 3 Axis Digital Read Out (X, Y & Z Axis) Spindle Taper R8 Spindle speeds to 50 - 3750 RPM Table Size 1065 x 230mm Table Travel: X - 765mm Y - 305mm Knee Travel: Z...
Milling
AJAX No.1 Universal Mill AJAX No.1 Universal Mill

Milling
Myford VM-F Turret Mill (3541) Myford VM-F Turret Mill (3541)
Myford VM-F Turret Mill, s/n 57537, table 760 x 180mm, Travels X-440mm, Y-190mm, spindle 80mm, metric dials, ram and tilting head, spindle speeds 160 to 2670rpm, spindle taper R8, 1hp motor, 3 axis DRO, light, well equipped with tooling and...
Milling
XYZ Pro 2000 (3451) XYZ Pro 2000 (3451)
XYZ Pro 2000, Prototrak AGE 2 CNC control, year 1990, s/n0261, (KR-V2000), 1270mm x 254mm table, trav 762 x 406mm x 127mm, power drawbar 30 taper spindle, riser block
Milling
BRIDGEPORT 2HP BRIDGEPORT 2HP
Power feed, 42 x 9in table, digital readout. Year 1998
Milling
BRIDGEPORT 2HP. BRIDGEPORT 2HP.
Power feed, 42 x 9in table, digital readout. Year 1998
Milling
GATE PBM 2500 TURRET MILL GATE PBM 2500 TURRET MILL
Table 50”x10” Traverses Spindle R8 ,SPINDLE MOTOR 3HP 3 axis digital readout ,guarding, power draw bar, power feeds along and cross
Milling
Bridgeport 2hp Varispeed Bridgeport 2hp Varispeed
36”x9”table , dro , new power feed, year 1986,
Milling
GATE PBM 1000 Turret Mill. 2006 GATE PBM 1000 Turret Mill. 2006
Table 1,067mm x 230mm, spindle taper R8, variable speed head 60-4,200rpm, motor 3hp, DRO, table guarding
Milling
BRIDGEPORT Series 1 2HP Year 2002 BRIDGEPORT Series 1 2HP Year 2002
Ball screw machine, 48 x 9in table, 30 ISO spindle with tooling package, new power feeds, new DRO, chrome slides. POA
Milling
SEMCO Turret Mill Type LC SEMCO Turret Mill Type LC
R8 spindle, 1,225 x 230mm table, variable 50-3,750rpm, power feed long and across, DRO
Milling
BRIDGEPORT Series 1 2HP. Varispeed, power feed, table 48in x 9in, DRO. 1988 BRIDGEPORT Series 1 2HP. Varispeed, power feed, table 48in x 9in, DRO. 1988

Milling
TAYLOR HOBSON Model K Mk 2 Light Profile Milling. With etching attachment, table 508 x 356mm, lots equipment. £1,250 TAYLOR HOBSON Model K Mk 2 Light Profile Milling. With etching attachment, table 508 x 356mm, lots equipment. £1,250

Milling
VERNIER FV 270 Universal Mill VERNIER FV 270 Universal Mill
40 Int taper, double-swivel vertical head, horizontal arbor and support, Anilam Mini Wizard 2-axis DRO, spindle speeds 45-2,000rpm £5,750
Milling
Ajax Turret Mill Ajax Turret Mill
ISO 30 spindle taper, speeds 49-2,440rpm, Mitutuyo 2-axis DRO, 49in x 9in table. With swivel vice and tooling
Milling
XYZ 1500 Turret Mill XYZ 1500 Turret Mill
Year 2001. Table 42in x 9in, 2-axis Acu-Rite DRO (Mill Mate), R8 taper, power feed unit to X-axis, variable speed head, speeds 60-4,200rpm
Milling
HURON MU6 Milling Machine HURON MU6 Milling Machine
With universal head, table 2,000 x 460mm, table traverse 1,500mm, spindle 50 Int, 8-2,066rpm
Milling
HURON NU5 Milling Machine with Universal Head. HURON NU5 Milling Machine with Universal Head.
Table 1,600 x 460mm, table travel 1,300mm, spindle 40 Int. C/w DRO
Milling
MILKO 90H Universal Mill with Motorised Overarm. MILKO 90H Universal Mill with Motorised Overarm.
Made in Spain 2007. Table 1,900 x 360mm, long travel 1,400mm, spindles 50 Int with pendant control, DRO & arbor supports
Milling
FIL Aurora FU 120 Bed Mill FIL Aurora FU 120 Bed Mill
Table 1,600 x 520mm, table traverses (XYZ) 1,250 x 900 x 700mm, vertical swivel head, 50 Int spindle, speeds 24-1,600rpm, horizontal spindle 25-1,200rpm. C/w DRO
Milling
Lateral Ram-Type Milling HURON LU. Heidenhain TNC 426, travels 4,000 x 1,000 x 2,000mm Lateral Ram-Type Milling HURON LU. Heidenhain TNC 426, travels 4,000 x 1,000 x 2,000mm

Milling
HURON NU3. Digital, travels 900 x 700 x 550mm HURON NU3. Digital, travels 900 x 700 x 550mm

Milling
Bed-Type Milling HURON PU 661. Digital, travels 1,650 x 1,000 x 1,000mm Bed-Type Milling HURON PU 661. Digital, travels 1,650 x 1,000 x 1,000mm

Milling
Bed-Type Milling HURON PU771. Digital, travels 1,900 x 1,000 x 1,000mm Bed-Type Milling HURON PU771. Digital, travels 1,900 x 1,000 x 1,000mm

Milling
HURON Bed Mill HURON Bed Mill
Capacity 1,650 x 1,000 x 1,000mm
Milling
HURON PU661 Bed Milling Machine HURON PU661 Bed Milling Machine
Table 2,000 x 700mm
Milling
HURON MU6 Universal Mill HURON MU6 Universal Mill
Digital 3-axis Stepless feeds Table 2,000 x 460mm Travels 1,500 x 700 x 550mm
Milling
LINE Plano Mill. Table 4,000 x 1,800mm LINE Plano Mill. Table 4,000 x 1,800mm

Milling
Universal Milling Machine HURON, MU 5, 1973 Universal Milling Machine HURON, MU 5, 1973

Milling
CNC Thread Mill with 4-Axis SCHIESS-KOPP, FK 12.32 CNC CNC Thread Mill with 4-Axis SCHIESS-KOPP, FK 12.32 CNC
1990, Siemens Sinumerik 810/820
Milling
SEMCO LC-20VS Heavy Duty Turret Mill (2007) SEMCO LC-20VS Heavy Duty Turret Mill (2007)
1,300 x 260mm table, 800mm table travel, 40 ISO spindle, 75-3,600rpm, 5hp vari-speed head, square knee slideways, 2-axis DRO, power long feed. Very nice condition.
Milling
BRIDGEPORT BR2J2 Turret Mill BRIDGEPORT BR2J2 Turret Mill
42in x 9in table, R8 taper, variable speed head, DRO, power long feed.
Milling
HARDINGE-BRIDGEPORT Series One BR2J2 Turret Mill HARDINGE-BRIDGEPORT Series One BR2J2 Turret Mill
48in x 9in table, R8 taper, variable speed head, 3-axis DRO, power long feed. Superb condition
Milling
BRIDGEPORT BR2J2 Series 1 Turret Mill (2005) BRIDGEPORT BR2J2 Series 1 Turret Mill (2005)
48in x 9in table, R8 taper, variable-speed head, 3-axis Acu-Rite DRO, power long feed. Excellent condition
Milling
LILIAN 5VH Heavy Duty Turret Mill (2007) LILIAN 5VH Heavy Duty Turret Mill (2007)
1,370 x 254mm table, 920mm table travel, 40 ISO spindle, 50-3,500rpm, 5hp vari speed head, square knee slideays, Acu-rite 3-axis DRO, power long feed, power rise and fall, power drawbar. Very nice condition
Milling
HURTH KF32A (1981) Twin Spindle Automatic Spline Milling Machiner HURTH KF32A (1981) Twin Spindle Automatic Spline Milling Machiner
1,500 x 375mm table, spindle stroke 400mm, AMT4 twin spindle index heads
Milling
XYZ KRV 2000 Turret Mill (1993) XYZ KRV 2000 Turret Mill (1993)
1270 x 254mm Table, 775mm Table travel, R8 Taper, 60-4200rpm Vari Speed Head, ACU-RITE D.R.O., Power long feed.
Milling
BRIDGEPORT BR2J2 Series 1 Turret Mill (2005) BRIDGEPORT BR2J2 Series 1 Turret Mill (2005)
48in x 9in table, R8 taper, variable speed head, 3-axis Acu-Rite DRO, power long feed. Excellent Condition.
Milling
BOKO WF1 Toolroom Milling and Boring Machine Table area 1,000 x 600mm. POA BOKO WF1 Toolroom Milling and Boring Machine Table area 1,000 x 600mm. POA

Milling
XYZ 1500 Turret Milling Machine XYZ 1500 Turret Milling Machine
Model: XYZ 1500 Year: 2015 Table Area: 1069 x 228mm ‘X’ Travel: 660mm ‘Y’ Travel: 305mm ‘Z’ Travel: 406mm Spindle Taper: R8 Spindle Speeds: 70-3500 RPM Spindle Motor: 3HP Machine With: 2 Axis...
Milling
Europa Milltech 1000VS Turret Milling Machine Europa Milltech 1000VS Turret Milling Machine
Model: 1000 VS Year: 2014 S/No.: 52E2MXIVTE5336 Table Area: 228 x 889mm ‘X’ Travel: 520mm ‘Y’ Travel: 300mm ‘Z’ Travel: 400mm Spindle Taper: R8 Spindle Speeds: 3600 RPM Spindle Motor: 2HP Machine With: 2 Axis Digital Readout Rapid...
Milling
1999 Asquith Butler Floor Type Power Centre HPF 1999 Asquith Butler Floor Type Power Centre HPF
CNC Bedmill Heidenhain TNC 426PB X/Y/Z Travels 22000/1500/1250 mm C-Axis 144 x 2° A-Axis 88 x 2° 90° Orthogonal Auto Indexing Head T Slotted Table Length 24000mm Width 1500mm Depth 1000mm 60 Station Tool Changer Spindle Nose ISO...
Milling
AJAX Budgetmaster Turret Mill AJAX Budgetmaster Turret Mill
40 Int, inf. var. head, 52in x 10in table, new power feed units X & Y axis, 2-axis DRO. £4,500
Milling
BRIDGEPORT Series 1 2HP. 50-3,750rpm, 48in x 9in table, chrome slides, fully rebuilt head. 1997 m/c. £7,500 BRIDGEPORT Series 1 2HP. 50-3,750rpm, 48in x 9in table, chrome slides, fully rebuilt head. 1997 m/c. £7,500

Milling
BRIDGEPORT Series 1 2HP Turret Mill. Speeds inf var 50-3,750rpm, 42in x 9in  table, chrome slides, 2-axis DRO. Rebuilt head. 1992 m/c. £6,250 BRIDGEPORT Series 1 2HP Turret Mill. Speeds inf var 50-3,750rpm, 42in x 9in table, chrome slides, 2-axis DRO. Rebuilt head. 1992 m/c. £6,250

Milling
DUFOUR No 2 Universal Mill. 40 Int. £2,500 DUFOUR No 2 Universal Mill. 40 Int. £2,500

Milling
ELLIOTT Sturdimill 1100R Universal. ELLIOTT Sturdimill 1100R Universal.
Compound head 35 - 1,200rpm, 3-axis RO.£4,250
Milling
TFY Turret Mill. TFY Turret Mill.
40 Int, 50-3,550rpm, 54in x 10in table, 2-axis DRO, power feed to X & Y axis. £4,250
Milling
BRIDGEPORT Series 1 2hp BRIDGEPORT Series 1 2hp
DRO, 48in x 9in table. POA
Milling
BRIDGEPORT 2JB, 48in x 9in table BRIDGEPORT 2JB, 48in x 9in table
DRO POA
Milling
RAMBAUDI Heavy Duty Turret Miller RAMBAUDI Heavy Duty Turret Miller
40-3,500rpm, 40 Int, 1,300mm x 300mm table, 2-axis DRO £4,750
Milling
KOPING VF10A No 3 Vertical Mill KOPING VF10A No 3 Vertical Mill
61in x 12 1/2in table, swivel head with 50 Int quill, 22-2, 240rpm £3,500
Milling
KENDAL & GENT CVM 15 Heavy Duty Kneeless Mill. DRO. POA KENDAL & GENT CVM 15 Heavy Duty Kneeless Mill. DRO. POA

Milling
BRIDGEPORT Series 1 2HP. 2-axis power feed, 3-axis DRO, slotting head. £5,950 BRIDGEPORT Series 1 2HP. 2-axis power feed, 3-axis DRO, slotting head. £5,950

Milling
XYZ 1500 3 Axis CNC Turret Milling Machine #78514 XYZ 1500 3 Axis CNC Turret Milling Machine #78514
XYZ 1500 3 Axis CNC Turret Milling Machine A.G.E 3 Axis CNC X, Y & Z (Quill) Variable Speed Head Spindle Taper R8 Spindle speeds to 50 - 4200 RPM Table Size 1066 x 228mm Motor 3hp Coolant #78514
Milling
Mostana 6T-13 Heavy Duty Vertical Milling Machine Mostana 6T-13 Heavy Duty Vertical Milling Machine
Mostana 6T-13 Heavy Duty Vertical Milling Machine Table Size 1700mm x 400mm Long travel 1010mm Cross travel 400mm Vertical travel 400mm Main Vert. Spindle ISO 50 Swivel Head Spindle Speeds 31.5 to 1600 rpm Machine weight 4400kg 3phase...
Milling
ALEXANDER 3A PANTOGRAPH (12059) ALEXANDER 3A PANTOGRAPH (12059)
ALEXANDER 3A PANTOGRAPH complete with squaring arm : Collets : Letter & Number Templates : Various Spares
Milling
BRIDGEPORT SERIES 1 BR2J2 TURRET MILL (12345) BRIDGEPORT SERIES 1 BR2J2 TURRET MILL (12345)
BRIDGEPORT SERIES 1 BR2J2 TURRET MILL R8 Spindle : Variable Speeds 50 - 3750 rpm : Table 48" x 9" : Power Feeds & Rapids Long. : Heidenhain 2 Axis DRO : Splash Tray : Coolant.
Milling
KEARNEY & TRECKER 307-S12 HORIZONTAL MILL (12423) KEARNEY & TRECKER 307-S12 HORIZONTAL MILL (12423)
KEARNEY & TRECKER 307-S12 HORIZONTAL MILL 50 Int. Spindle : 24 Speeds 25 - 2000 rpm : Plain Table 62 1/2" x 12" : Power Feeds & Rapids In All Directions : Newall 2 Axis DRO : Backlash Eliminator : 2 off Arbor Supports & Arbor : Motor 7.5 HP :...
Milling
ADCOCK & SHIPLEY 1ESG HORIZONTAL MILL (12367) ADCOCK & SHIPLEY 1ESG HORIZONTAL MILL (12367)
ADCOCK & SHIPLEY 1ESG HORIZONTAL MILL 40 Int. Spindle : 18 Speeds 50 - 2500 rpm : Table 30" x 8" : Power Feeds Long. : Arbor Support & Arbor : Change Gears : Coolant.
Milling
BRIDGEPORT BRJ TURRET MILL (12365) BRIDGEPORT BRJ TURRET MILL (12365)
BRIDGEPORT BRJ TURRET MILL R8 Spindle : 8 Speeds 67 - 2300 rpm : Belt Change Head : Table 42" x 9" : Power Feeds Long. : 2 Axis DRO : Low Volt Light : Coolant & Splash Tray.
Milling
AJAX No.1 UNIVERSAL MILL (12528) AJAX No.1 UNIVERSAL MILL (12528)
AJAX No.1 UNIVERSAL MILL 40 Int. Spindle : Speeds 48 - 1500 rpm : Table 43 1/4" x 9 1/2" : Power Feeds & Rapids In All Directions : Heidenhain 3 Axis DRO : Swivel Vertical Head : Arbor Support & Arbor : Cutter Guard : Coolant.
Milling
AJAX Ram Mill AJAX Ram Mill

Milling
XYZ SMX 4000 CNC Mill With ProtoTrak SMX control XYZ SMX 4000 CNC Mill With ProtoTrak SMX control

Milling
KRV 3000 Turret Mill. Pristine condition KRV 3000 Turret Mill. Pristine condition

Milling
BRIDGEPORT Turret Mill C/w 2-axis DRO BRIDGEPORT Turret Mill C/w 2-axis DRO

Milling
XYZ 1500 Turret Mill XYZ 1500 Turret Mill
C/w 2-axis DRO
Milling
BRIDGEPORT Turret Mill BRIDGEPORT Turret Mill
c/w 2-axis DRO. Very good condition
Milling
BOKO WF1 Mill BOKO WF1 Mill
C/w DRO
Milling
Pristine Bridgeport Turret Mill Pristine Bridgeport Turret Mill
c/w power feeds all round and 2 axis DRO system
Milling
LAGUN GTM-2 T-TYPE MOVING COLUMN MILLING MACHINES WITH TURNING OPTION LAGUN GTM-2 T-TYPE MOVING COLUMN MILLING MACHINES WITH TURNING OPTION
Manufacturer LAGUN Model GTM-2 Year of Manufacture 2014 CNC HEIDENHAIN TNC 640 Integrated Turning Table Table Surface Ø 1800 mm Radial T slot size 22 Max Speed of table 400 r.p.m. Max. Weight Allowed on Table 5.000 kg. Power 28...
Milling
XYZ SMX3500 Bed Mill (3401) XYZ SMX3500 Bed Mill (3401)
XYZ SMX3500 Bed Mill, 2011 s/n 11367, Prototrak SMX3 CNC control, table 1372mm x 355mm, Trav 762 x 508 x 58mm, power drawbar 40int, Guards, Options - DXF Convertor
Milling
XYZ PRO 2000 Turret Mill (3452) XYZ PRO 2000 Turret Mill (3452)
XYZ PRO 2000 Turret Mill, 1998, s/n 8657, Table size 1270 x 254mm. Trav 762 x 406 x 406mm, 2 axis Newell DRO, R8 , power feed long
Milling
XYZ VM3500 Bed Mill (3408) XYZ VM3500 Bed Mill (3408)
XYZ VM3500 Bed Mill, Year TBA s/n 10379, Prototrak VM CNC control, table 1372mm x 355mm, Trav 762 x 508 x 58mm, power drawbar 40int, Options - TBC
Milling
Universal Milling HURON MU66. Digital, table 2,000 x 700mm Universal Milling HURON MU66. Digital, table 2,000 x 700mm

Milling
Fixed Bed Milling Machine HURON PU 771 Fixed Bed Milling Machine HURON PU 771
Serial number 1640. Travels X=1,900, Y=1,000, Z=1,000mm, table 2,235 x 1,000mm, spindle attachment ST50, spindle speeds 27/30-2,066rpm, feeds (variable) 2,800mm/min, main motor power 12hp. Machine equipped with Heidenhain 3-axis DRO,...
Milling
LAGUN FUTV 125 Turret Milling Machine LAGUN FUTV 125 Turret Milling Machine
Reference: FR115 Model FU TV 125 Serial number 39421 YOM 1996 Travels (mm) X850 Y290 Z475 Ram stroke (mm) Manual 570 Table size (mm) 1250 x 280 Spindle attachment (Iso) 40 (H/V) Quill (mm) 120 Spindle speeds (Rpm) Var 50-3750 Feeding... With video
Milling
HURON PU 771 Fixed Bed Milling Machine HURON PU 771 Fixed Bed Milling Machine
Reference: FR114 Model PU 771 Serial number 1640 Travels (mm) X1900 Y1000 Z1000 Table size (mm) 2235 x 1000 Spindle attachment (ST) 50 Spindle speeds (Rpm) 27/ 30-2066 Feeding speeds (mm/mn) Var 2800 Main motor power (Hp) 12 Machine...
Milling
HURON MU 50 Milling Machine HURON MU 50 Milling Machine
Travels X=1,300, Y=750, Z=550mm, table size 1,635 x 700mm, spindle attachment ST40, spindle speeds 27/ 30-2,066rpm, feeding speeds 27/1.6-820mm/min, rapid feeding speed 2.8m/min, main motor power 12hp. Machine equipped with Heidenhain...
Milling
Universal Milling HURON MU55. Table 1,635 x 700mm Universal Milling HURON MU55. Table 1,635 x 700mm

Milling
Huge selection of manual turret mills in stock. 20+ machines to choose from! Huge selection of manual turret mills in stock. 20+ machines to choose from!
Brands include Bridgeport, Ajax, XYZ, Europa & Chester
Milling
ALCERA 1200 Universal Milling Machine ALCERA 1200 Universal Milling Machine
Reference: FR111 Model 1200 Travels (mm) X1200 Y400 Z530 Table size (mm) 1900 x 350 Spindle attachment (ST) 40 Spindle speeds (Rpm) 22-1600 Feeding speeds (mm/mn) LT10-700 V5-350 Rapid feeding speed (m/mn) LT3 V1.5 Main motor power... With video
Milling
Universal Milling HURON MU 66. Digital, table 2,000 x 700mm Universal Milling HURON MU 66. Digital, table 2,000 x 700mm

Milling
AJAX AJT 500 Heavy Duty Mill AJAX AJT 500 Heavy Duty Mill
With vari-speed turret head, horizontal spindle arbor & supports, power feed in 4 axes, 3-axis DRO. Immaculate. YOM 2015
Milling
Bridgeport BR 2J2 Bridgeport BR 2J2
Ex university. All have 3-axis DRO, power feed to X & Y axis & spindle guards. Immaculate YOM 1990 to 2001. Choice of 4!
Milling
XYZ DPM 3500 XYZ DPM 3500
with AGE 3 control, power draw bar, Quill scale summing device, IS040 spindle, X 770mm, Y 500mm, Z 500mm YOM 1998
Milling
XYZ 1020 VMC XYZ 1020 VMC
with Siemens 810D & Shop Mill, 1020mm x 540mm x 580mm XYZ travels, 8,000RPM 24 station side mount rapid tool changer, YOM 2010
Milling
BUTLER Elgamill DR12VA BUTLER Elgamill DR12VA
6 metre X-Axis travelling column machine. New 3-axis DRO, refurbished ram slides.
Milling
Condor RM 4VH Turret Milling Machine Condor RM 4VH Turret Milling Machine
Table: 1470 x 300mm, Year of Manufacture: 1994 Mitutoyo Digital Readout 6″ Machine Vice
Milling
ZAYER Bed Mill ZAYER Bed Mill
Digital, travels 1,500 x 1,000 x 1,000mm
Milling
Universal Bed-Type Milling HURON PU661. Digital, table 2,000 x 700mm Universal Bed-Type Milling HURON PU661. Digital, table 2,000 x 700mm

Milling
Universal Milling SCHAUBLIN 53. Digital Universal Milling SCHAUBLIN 53. Digital

Milling
Universal Milling HURON MU40. Digital, table 1,435 x 700mm Universal Milling HURON MU40. Digital, table 1,435 x 700mm

Milling
HURTH KF32A Twin Spindle Spline Miller HURTH KF32A Twin Spindle Spline Miller
New 1980’s, machine table size (clamping standard) 1,500mm x 375mm, max cutter diameter 95mm, cutter spindle taper ISO 40, distance spindle axis to table min 150mm max 250mm, spindle head travel 400mm, vertical adjustment (hand) 100mm, AMT – 150...
Milling
XYZ 1500 XYZ 1500
Low cost manual milling. 3HP VARIABLE SPEED HEAD 42” x 9” (1069 x 228 mm) TABLE 26” x 12” (660 x 305 mm) TRAVEL Pictured with guards removed for clarity.
Milling
XYZ 2000 XYZ 2000
Low cost manual milling. 3HP VARIABLE SPEED HEAD 50” x 10” (1270x254mm) TABLE 30” x 16” (750x380mm) TRAVEL Pictured with guards removed for clarity.
Milling
FOREST-LINE S222F35 Plano Milling Machine FOREST-LINE S222F35 Plano Milling Machine
Table size (mm) 3500 X 1800 Distance between-columns (mm) 2200 Weight admitted (T) 30 Spindle attachment (ST) 50 Height under cross-rail (mm) 1900 Spindle speeds (Rpm) Var. 2500 Feeding speeds (mm/mn) 5000 Main motor power (Hp) 70 Machine...
Milling
HURON NU5 Universal Milling Machine HURON NU5 Universal Milling Machine
Travels (mm) X1300Y700Z550 Table size (mm) 1635x460 Spindle attachment (ST) 40 Spindle speeds (Rpm) 27/30-2066 Machine equipped with : DRO 3 axis Weight of the machine (T) 3.2 With video
Milling
JUARISTI TX1-D Vertical milling center T-type 4 axis JUARISTI TX1-D Vertical milling center T-type 4 axis
Reference: CUV018 Model TX1-D-MGX6-ATC-APC YOM 2007 Vertical travel (mm) Y1500 Travel of the column (mm) Z1500 Longitudinal travel (mm) X2000 Table size (mm) 1250x1250 (x2) T-slots size 22H7 N°of T-slots 7 Distance between T-slots... With video
Milling



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy