Meddings Pillar Drill, Floor , Model DTF DTF
Meddings Pillar Drill, Floor , Model DTF serial number 031575, 500-4000RPM, Jacobs Chuck 1-13mm, Morse Taper No2,  100mm Spindle Stroke, Chuck Guard, Rise and Fall Table, Does not include compound vice on table [Ref: 106162]
Drilling ACRA FRD 1280H Radial Arm Drill FRD 1280
Our ACRA Radial Arm Drills offer premium build quality with features including power spindle feeds, coolant systems and safety features to enhance productivity.Heavy-duty construction & compact in design, the radial drilling machine is the most...
Drilling Pollard Pedestal drill, belt driven, 2 Morse Taper 106594
Pollard Pedestal drill, belt driven, 2 Morse Taper Spindle, 16 x13 inch Rise & Fall Table, Safety JET Brake, Spindle Speeds 660/1180/1800/2600/3740RPM. [Ref: 106422]
Drilling Elliott Twin Spindle Drill Mounted To T Slotted Cast Iron Table leeds9
Elliott Twin Spindle Drill Mounted To T Slotted Cast Iron Table (2ft x 54" x 3ft High), 3 Phase 440Volts, 50Hertz, both belt driven.  Left hand side drill Elliott No 2G 7/8" Diameter Capacity, Speeds Low 36/69/113/182/281 - Speeds High -...
Drilling Fobco 7 Eight Pedestal Drill 108085
Fobco 7 Eight Pedestal Drill, speeds 51-2650 RPM, 520 mm x 450mm table, 3 phase. [Ref: 106920]
Drilling Ajax Heavy Duty Pillar Drill 4 MT Spindle 109576
Ajax Heavy Duty Pillar Drill, Geared Head,  3 MT Spindle, Coolant, Brake, 18 inch x 18 inch rise and fall tee slotted table. approx 7ft high. [Ref: 107117]
Drilling Herbert Twin Spindle Drill Rise and Fall Table leeds10
Herbert Twin Spindle Drill Rise and Fall Table [Ref: 107512]
Drilling Ibarmia 50 CA drill 111653
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Ibarmia 50 CA drill  [Ref: 107888]
Drilling Ibarmia 50 Drill with multihead 111598
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Ibarmia 50 Drill with multihead attachment, fitted with pneumatic arm. [Ref: 107833]
Drilling Ibarmia 50-CA gear head single spindle drill 111634
Ibarmia 50-CA gear head single spindle drill, coolant fitted to spindle, speeds 58-1098 rpm, 3MT term with drill chuck.  [Ref: 107869]
Drilling Ibarmia a-40 drill geared head 111654
Ibarmia a-40 drill geared head , 10-40mm capacity, model a40 605.H [Ref: 107889]
Drilling Ibarmia A30 Drill Geared Head 111635
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, GrindersIbarmia A30 Drill Geared Head, 10-32 mm drill capacity, 2MT termination, with drill chuck...
Drilling IBARMIA B60 drill No 202 111611
IBARMIA B60 drill No 202 multihead, pneumatic attachmentFOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107846]
Drilling Arbor Press test Rig Hydraulic 111661
Arbor Press test Rig Hydraulic FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107896]
Drilling Ciclo- Matic Drill 111612
Ciclo- Matic Drill FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107847]
Drilling Cito-Matic drill and tapping unit 111638
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Cito-Matic drill and tapping unit with coolant, on mobile stand. [Ref: 107873]
Drilling Desoutter AFDE 40 tapping drilling unit 111630
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, GrindersDesoutter AFDE 40 tapping drilling unit 8242, 3000 rpm, and another unit on frame. [Ref:...
Drilling Drill Single Spindle 111596
Drill Single Spindle FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107831]
Drilling Elliot No 1 Drill 111663
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Elliot No 1 Drill  090666-798 [Ref: 107898]
Drilling Erlco TCA 40 Drill 111655
Erlco TCA 40 Drill , serial number 1353/216, coolant and pump, swivel table.FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107890]
Drilling INSO Model TCA 30 Drill 111610
INSO Model TCA 30 Drill , 100-1030 rpm, fitted with Jacobs keyless chuck, coolant, Rise & Fall table.FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses,...
Drilling Multi Head Drill Tamic Micronsa CT IR8 111629
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, GrindersMulti Head Drill Tamic Micronsa CT IR8 9-2  178. [Ref: 107864]
Drilling Pollard 150 A/1 drill 111669
Pollard 150 A/1 drill serial number 314158, two spindles on three base. coolant tank. FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders [Ref:...
Drilling Pollard 3 spindle drill on 4 base 111623
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Pollard 3 spindle drill on 4 base, speeds 86-1920rpm. [Ref: 107858]
Drilling Pollard 3 spindle in line drill 111617
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Pollard 3 spindle in line drill , 86-1920 rpm, model 150 a/3, coolant.  [Ref: 107852]
Drilling Pollard Corona (4) Spindle inline drill model 15 EY 111648
Pollard Corona (4) Spindle inline drill model 15 EY, 3 MT termination, speeds 86-1920 rm, one fitted with Tapmatic RX50 head, coolant pipe and tank. Price £950.00 plus VATFOR SALE DIRECT FROM SITElocated at site in North Wales factory. along...
Drilling Pollard Corona 15 AY Drill 111628
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, GrindersPollard Corona 15 AY Drill , serial number 21030J, with Slack and Parr Multi Head.  [Ref:...
Drilling Pollard Corona Drill Single Spindle 111659
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Pollard Corona Drill Single Spindle , spindle speeds 86-1920 rpm.  [Ref: 107894]
Drilling Pollard Corona Drill Single Spindle 111597
Pollard Corona Drill Single SpindleFOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107832]
Drilling Pollard Drill single Spindle Drill 111608
Pollard Drill single Spindle Drill FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107843]
Drilling Pollard single spindle drill 111662
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Pollard single spindle drill  [Ref: 107897]
Drilling Pollard single spindle drill 111600
Pollard single spindle drill , speeds 86-1920 Rpm, 3 MT spindle. FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders. [Ref: 107835]
Drilling Single Spindle Drill ARA-MOn SS Drill 601 111607
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders.Single Spindle Drill ARA-MOn SS Drill 601  [Ref: 107842]
Drilling Single Spindle Multi Head Drill Single Spindle 111613
FOR SALE DIRECT FROM SITESingle Spindle Multi Head Drill Single Spindle located at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, Grinders [Ref: 107848]
Drilling Ara- Mon- drill on stand serial number 390-2510 111614
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, GrindersAra- Mon- drill on stand serial number 390-2510 [Ref: 107849]
Drilling twin station tapping head with Desoutter 111640
twin station tapping head with DesoutterDesoutter AFDF40, plus An other - on bench. Price £250.00 Plus VAT, loaded from site. FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes,...
Drilling Press Special purpose 111615
FOR SALE DIRECT FROM SITElocated at site in North Wales factory. along with CNC machining centres, CNC lathes, Drills, Broaches, Presses, GrindersPress Special purpose  [Ref: 107850]
Drilling Meddings Pillar Drill MF 5 111228
Meddings Pillar Drill, model MF5, speeds 100-3600 rpm belt type, serial number 021815 Operators Foot Brake, 3 phase supply.   more information to be supplied.Ex University Price £750.00 Plus VAT, loaded Darwen Bb3 3Df.  We can...
Drilling Herbert 2 spindle in line drill 111255
Herbert 2 spindle in line drill [Ref: 107751]
Drilling Archdale Radial Arm Drill, 5ft arm. 111334
Archdale Radial Arm Drill, 5ft arm. Model RD13642, with 5MT spindle, with tee slotted box table , telescopic safety brake brake, coolant. [Ref: 107798]
Drilling Fobco Bench drill 111758
Fobco Bench drill [Ref: 107964]
Drilling Meddings Ibarmia Drill A40 111931
Meddings Ibarmia Drill, A40, Geared Head Drill, Sub Table 10-40mm Dia, 200mm Stroke, Speeds 61-1169 [Ref: 108046]
Drilling 4x Bench Drills 111932
4x Bench Drills [Ref: 108047]
Drilling Darek Drill Point Grinder 111928
Darek SP2500 Drill Point Grinder [Ref: 108043]
Drilling Pnumatic Tapper 111929
Benceve Pnumatic Tapper [Ref: 108044]
Drilling Used Arboga Radial Drill (4622)
Used Arboga Radial Drill, 2'6" arm, 3MT, 100-1,280RPM, Table 20' x 20'
Drilling AJAX AJ155 Radial Drill
48in arm, 4MT spindle, 18 spindle speeds 50-1,500rpm, 910 x 760mm box table, dc braking system. Super condition. Ex Royal Navy
Drilling MEDDINGS MB 4/3 BENCH DRILL
Capacity 22mm, speeds 80-4000rpm, spindle 2MT, chuck
Drilling ELLIOTT 2G BENCH DRILL
Capacity 7/8", speeds 36-2570rpm, chuck & guard
Drilling STARTRITE 20V / UK3 10-Speed Vertical Bandsaw. Ex university hospital
Throat 20in, daylight 12in, table size 201/2in x 201/2in, blade speeds 50-3,000fpm, blade width 5/8in, tilting table, motor size 1.5kW. POA
Drilling HERBERT "V" TYPE PILLAR DRILL (13516)
HERBERT "V" TYPE PILLAR DRILL 3MT Spindle : Hand Feeds : 8 Speeds 74 - 1455 rpm : Rise & Fall Table 15" x 13" : Spindle Instabrake, Emergency Stop Switch & Interlocked Guard :Ex Maintenance Dept.
Drilling MEYER SR35A Heavy Duty Pillar Drilling Machine

Drilling Ajax AJ155 Radial Arm Drill. £6,750
L20303.01 AJAX AJ155 36” RADIAL ARM DRILL CAPACITY 3’ (914mm) Maximum Radius of Spindle 14” (355mm) Minimum Radius of Spindle 4 MT Spindle 7 ½” (190.5mm) Travel of Spindle 4’ (1250mm) Maximum Spindle to baseplate 11” (279mm)...
Drilling Ajax AJ155 Radial Arm Drill. L20303.01 £6,750
Manufacturer Ajax Type Radial Arm Drill Model AJ155 Capacity 3’ (914mm) Centre of column to spindle 1000mm Maximum projection of arm 4 MT Spindle 7 ½” (195mm) Travel of Spindle Spindle to base 1250mm Forward / Reverse/ Stop /...
Drilling KITCHEN & WADE 6ft Radial Arm Drill. With box table. POA

Drilling ASQUITH ODI MK2 14/54 Radial Drill. POA

Drilling (7) IBARMIA 50-CA & 40-CA Gear Head Single-Spindle Drills

Drilling KITCHEN & WALKER E3 Radial Arm Drill Arm length 4ft 6in, rise & fall arm

Drilling KERRY R4 Radial Arm Drill Rise & fall table, power downfeed

Drilling IBARMIA B50 Bore capacity in steel (diameter) 50mm

Drilling HELTOS A.S. Heavy Duty Pillar Drill. POA

Drilling IBARMIA & POLLARD Drills

Drilling MEDDINGS MB4 BENCH DRILL (13528)
MEDDINGS MB4 BENCH DRILL 2 MT Spindle : 10 Speeds 80 - 4000 rpm : Hand Feeds : Rise & Fall Table 11" x 10" : 240 Volts - Single Phase Electrics.
Drilling Clarke Drill Presses

Drilling ASQUITH OD1 4ft 6in Radial Arm Drill
5MT, 42-1,130rpm, dead-stop unit. 1976 m/c. £4,500
Drilling KITCHEN & WALKER E38-800 Radial Arm Drill
800mm arm, 4MT, 75-1,250rpm, dead-stop unit. £2,750
Drilling ARCHDALE Radial Arm Drill with 5ft arm

Drilling ASQUITH OD1 Mk2
54in arm, spindle speeds 22-1,000rpm, with box table, instabrake, 5MT spindle
Drilling Kitchen & Walker G50 x 1250 Radial Arm Drill,
New 2013, Drilling Capacity in Steel 50mm & Iron 75mm, 5Mt Spindle with speeds upto 2000rpm. C/w box table
Drilling KITCHEN & WALKER E32 4ft 6in. Excellent condition

Drilling ASQUITH 2PT Powerthrust Radial Arm Drilling Machine
4MT, drilling capacity 2in, radius 54in, speeds 40-2,040rpm, spindle brake, box table
Drilling ASQUITH Power Thrust 2PT 12-54 Radial Drill. With box table. POA

Drilling RICHMOND SR2 Radial Drilling Machine.
3MT, radius 762mm, 100-1500rpm, rise & fall table, instabrake. Excellent condition
Drilling KITCHEN & WALKER G50 x 1250 Radial Arm Drill
New 2013. 5MT, drilling capacity in steel 50mm & iron 75mm, spindle with speeds up to 2,000rpm. C/w box table
Drilling ASQUITH OD1 4ft 6in Radial Arm Drill
42-1,130rpm, 5MT. 1976 m/c. £4,750
Drilling KITCHEN & WALKER KWM 50/1600 Radial Arm Drill
28-2,500rpm, 5MT. YoM 2000. Ex BAe. £7,500
Drilling HERBERT V Type 4-Spindle 3MT Pillar Drill
74-1,455rpm, 2 spindles with power down feed, 2 spindles hand down feed. £2,750
Drilling ASQUITH OD1 4ft 6in Radial Arm Drill
5MT, 42-1,130rpm, dead stop unit. 1971 m/c. £2,850
Drilling Meddings MB4 Bench Drilling Machine #78732
Meddings MB4 Bench Drilling Machine Table size 10 x 11’’ Spindle Speeds 310 - 1200 rev/min Overall height is approx. 1m 415v 3 Phase www.jetmachniery.co.uk Stock No: 78732 Serial No: 788404 Price: £500.00 + VAT Whilst every effort has...
Drilling Startrite 20RWS Vert Tool-room Bandsaw. £1,750

Drilling Radial Drill KOLB, HK 126
MT 6, throat 2,500mm, drill radius min/max 880/2,825mm
Drilling RICHMOND Envoy Radial Arm Drill

Drilling Pollard Corona 1EX Inline 4 Spindle Drilling Machine #78729
Pollard Corona 1EX Inline 4 Spindle Drilling Machine Table Size 33’’ x 10’’ 2 Morse Taper Spindles Spindle speeds to 3000rev/min 3 Phase Electrics (415v) www.jetmachniery.co.uk Stock No: 78729 Serial No: - Price: £1,500.00 + VAT Whilst...
Drilling Kerry K3 Radial Arm Drilling Machine #78742
Pollard Corona 1EX Inline 4 Spindle Drilling Machine Table Size 33’’ x 10’’ 2 Morse Taper Spindles Spindle speeds to 3000rev/min www.jetmachniery.co.uk Stock No: 78742 Serial No: - Price: £3,950.00 + VAT Whilst every effort has been made...
Drilling RICHMOND SR2 Radial Drilling Machine
3 MT, radius 762mm, 100-1,500rpm, rise & fall table, instabrake. Excellent condition
Drilling ASQUITH Powerthrust Drill

Drilling POLLARD Model 130 A Pillar Drill
2MT, 20mm cap, 0.83-1,075rpm. Ex R&D shop
Drilling POLLARD 100F/1 Bench Drill. 1MT, 330-1,870rpm. £475

Drilling MEDDINGS MF5/3 2MT Pillar Drill .100-3,000rpm. £975

Drilling MEDDINGS MF4/3 2MT Pillar Drill. 80-3,000rpm. £775

Drilling ELLIOTT Progress No 2G Bench Drill. 2MT, 44-3,079rpm. £625

Drilling KITCHEN & WALKER KWM 32- 1000 Radial Arm Drill
Spindle to column surface 1,000mm, spindle 4MT, speeds 90-4,500rpm. C/w coolant, light bow table & vice
Drilling MAS VO50 Radial Arm Drill. With box table. POA

Drilling Radial Drill MAS, VO50, 1991, MK 5, throat 1,100mm, thread cutting device

Drilling ERLO TCA 40 Pillar Drilling Machine
Reference: PER018 Model TCA 40 Serial number 426/431 YOM 1992 Spindle attachment (MT) 4 Quill (mm) 240 Drilling Ø (mm) 40 Spindle speeds (Rpm) 9/68-1270 Main motor power (Hp) 3 Weight of the machine (T) 0.7
Drilling ASQUITH OD1 Mk2 14/54 Radial Arm Drilling Machine
5MT, drilling capacity 3in, radius 54in, speeds 22-1,000rpm, spindle brake, box table
Drilling KITCHEN & WALKER 5ft E3 Radial Arm Drill. 5MT, 12-1,000rpm. £3,950

Drilling POLLARD 250 B/1 4 MT Heavy Duty Pillar Drill. 44-1,070rpm, 20in x 20in T-slotted table. £3,450

Drilling KITCHEN & WALKER 4ft 6in E2 Radial Arm Drill. 4MT, 25-1,560rpm. 1982 m/c. £6,500

Drilling KITCHEN & WALKER G32-1000 Radial Arm Drill. With box table. POA

Drilling Radial Drill KOLB, Uh 1600, 1983, MT 5, throat 1,600mm

Drilling WMW Sabo Standard 40 Heavy Duty Drill
C/with rise & fall head and table, 4 Morse taper, power feeds to spindle, 63-1,000rpm, auto forward/reverse for tapping, electro-mag brake on spindle. German quality. £3,250+VAT
Drilling Excellent Quality German WMW BK4A1 Heavy Duty Pillar Drill
580 x 700mm table, power feeds, 63-1,000rpm, auto forward/reverse for tapping, coolant, 50mm capacity. £2,995+VAT
Drilling POLLARD 250 B/1 4 MT Heavy Duty Pillar Drill
44-1,070rpm, 20in x 20in T-slotted table. £3,450
Drilling WMW BK4A1 HEAVY DUTY PILLAR Drill……….POA
Excellent quality German WMW BK4A1 Heavy Duty Pillar Drill. Rise & fall Table. 580 x 700mm table Power feeds 63-1000rpm Coolant 50mm capacity
Drilling WMW Sabo Standard 40 Heavy Duty Drill…………POA
WMW Sabo Standard 40 Heavy Duty Drill with Rise and Fall Table, 4 Morse Taper, Power Feeds to Spindle, 63 – 1,000rpm. German Quality.
Drilling Herbert 6 Spindle Drilling Machine #78614
Herbert 6 Spindle Drilling Machine 1 Drilling Heads with Power Feed Spindle Taper 2MT Spindle Speeds 106 – 2850rev/min Table Size 68” x 15” www.jetmachinery.co.uk Jet Machinery Stock Number: #78614 Machine Serial Number: F34291 £3,950.00 +...
Drilling IBARMIA 50-CA Pillar Drill
50mm capacity, speeds up to 1,098rpm. With power feeds
Drilling NEW IBARMIA Drilling Machines
IBARMIA drilling machines have been one of Europe's high quality, most respected ranges over the past 50 years. As the preferred brand in MOD and educational establishments across the UK, new customers can be assured of their quality and...
Drilling KITCHEN & WALKER E2 4ft 6in Radial Arm Drill 4MT, 25-1,560rpm. £5,250

Drilling COLLET Portable Universal Radial Drill.

Drilling MEDDINGS Model L1 x4 Inline Drills
500-4,000rpm, table 2,000 x 450mm, DC braking
Drilling EXCEL RD-900 Radial Arm Drill. New 2018
Box table, coolant, spindle guard, 4MT, 1,080mm, arm length, speeds to 1,500rpm, power feed, 200mm spindle stroke (21059) POA
Drilling Meddings Pedestal & Bench Pillar Drills

Drilling WMW Heavy Duty Pillar Drill. Ref 29042

Drilling RICHMOND SR2 Fixed Arm Radial Drill with Elevating Table
No.3 Morse taper, speeds 50-1,500rpm, feeds .005 / .010 / .015in/rev, table 36in x 24in
Drilling KITCHEN & WADE E2 4ft Radial Arm Drill
Spindle speeds 53-1,000rpm, 4 Morse taper. Complete with box table
Drilling KITCHEN & WADE E25 3ft Radial Arm Drill. 4MT, 80-1,500rpm. £4,250

Drilling ASQUITH Power Thrust 4PT 14-54

Drilling BERGONZI T40 1,250mm Radial Arm Drill with Box Table. Ref 29059

Drilling BAILEIGH Model DP1500G Drill
Year 2019. 4MT, power downfeed. Excellent condition. Nearly new
Drilling COLLET Portable Universal Radial Drill

Drilling BEMA MG1050 Radial Arm Drill. New 2017. 50mm capacity, speeds to 2,500rpm, 3MT, spindle stroke 280mm, box table, coolant (20952) POA

Drilling KERRY Model R4 Radial Drill. Rise & fall table, instabrake, spindle taper 4MT, power down feed

Drilling MEDDINGS Model MB4. With 2MT. £395

Drilling ARBOGA Model 1830. All geared head, 4MT, column to spindle 620mm. £3,750

Drilling MEDDINGS Model A10 Articulated Arm Drill
2MT, back geared, 80-4,000rpm, 600 x 600mm rise & fall table
Drilling CSEPEL WRA-40 Radial Drill
1,250mm arm, 4MT
Drilling AJAX 4MT All Geared Head Pillar Drill.
4 rates of downfeed
Drilling HCP Model WRA40 Radial Drill
4MT x 1,250mm arm, box table
Drilling Kitchen & Walker KVM 50-1250 Elevating Column Radial Arm Drill
Ref nos 3222/190, max distance between spindle and slideway guides 1250mm, spindle speeds 28 to 2500rpm, power feeder, slotted box table size 1000 x 750 x 450mm, with auto stop brake.
Drilling EXCEL 3MT DRILL MODEL PK 203
POWER DOWN FEED
Drilling KITCHEN & WALKER MODEL E2 RADIAL ARM DRILL
4’ 6 ARM, BOX TABLE, 5 MT, DC BRAKING, COOLANT
Drilling AJAX Heavy Duty All Geared Head Drill
4 morse taper, power downfeed, rise & fall table with tilt, coolant
Drilling POLLARD 6-Spindle Spindle Type 130A
2MT, 1 spindle with reverse , rise & fall table
Drilling STARTRITE Mercury Bench Drill
1.5in capacity, speeds 95-3,850rpm. With back gear . Mounted on a stand £450
Drilling QUALTER & SMITH Envoy Radial Drill
Max drilling radius 1,000mm, 65mm drilling capacity, 5MT spindle, 50-2,000rpm, box table. Excellent condition
Drilling POLLARD 15AY. 3MT, 86-1,920rpm, power down-feed. £1,850

Drilling DONAU DR-32 Radial Drill
£4,850
Drilling WMW Twin Spindle Drill
4MT, speeds 63-1,000rpm, power feed on both heads, tapping on one, R & F heads, 37½in x 18in T-slotted R & F table, coolant, lo-volt lighting, foot emergency stop bar, chuck guards. £4,500
Drilling Asquith 4'6" OD1 Radial Arm Drilling Machine
Year 1964 Spindle 5mt Spindle speeds 58-1550 rpm Max drilling capacity in Cast Iron 3.5? in steel 3? Spindle feeds .004 – .038 inch per rev Accessories: Jet brake Box table
Drilling RICHMOND Radial Arm Drill

Drilling ASQUITH-ARCHDALE 4PT 15-54 Heavy Duty Radial Arm Drill

Drilling CHIRON FZ 08 S Mill Drill Centre

Drilling MAS VO 50 Radial Arm Drill

Drilling RICHMOND Envoy 4ft 6in Radial Arm Drill. No 5 morse taper. Excellent condition

Drilling KITCHEN & WALKER E2 Radial Drill. C/w box table

Drilling KITCHEN & WALKER 4ft 6in Radial Arm Drill
C/w box table
Drilling FANUC Robodrill Alpha T14iA Drill/Tap Centre
with Fanuc Series 16i-M control, 14-Station ATC Table size: 650mm x 380mm Max weight on table 200kgs Max Movement: X 500mm, Y 380mm, Z 300mm Distance from table surface to spindle gauge plane: 150mm top 450mm Spindle Speed: 80 - 8000rpm Max...
Drilling CARLTON-CINCINNATI 7in Heavy Duty Radial Drilling Machine
Spindle stroke (mm) 450 Spindle Ø (mm) 100 Table size (mm) 2200x1300 Distance between table-tool (mm) 1900 Arm length (mm) 2300 Max radius (mm) max 2700 Spindle attachment (MT) 6 Spindle speeds (Rpm) 34-1200 Main motor power (Hp) 12 Machine...
Drilling CCV Multi Spindle Device for Drilling Machine

Drilling GSP 407Q17 Radial Drilling Machine
Reference: RAD010 Model 407Q17 Spindle stroke (mm) 400 Distance between table-tool (mm) 350-1550 Spindle attachment (MT) 5 Max radius (mm) 590-1960 Spindle speeds (Rpm) 24/ 25-1400 Feeding speeds (mm/mn) 8/ 0.06-1.5 Main motor power...
Drilling GYSIN RH40 Radial Drilling Machine
Serial number 6595 YOM rebuilt in 1993 Spindle stroke (mm) 300 Distance between table-tool (mm) 270-1270 Spindle attachment (MT) 4 Arm length (mm) 1290 Drilling Ø (mm) 45 Spindle speeds (Rpm) 21-1800 Weight of the machine (T) 2.5
Drilling SYDERIC 2 Heads Bench Type Drilling and Tapping Machine
Drilling dia 20mm Tapping dia 12mm
Drilling