Studergrind until 31 July 2022

rss

Category: Lasers



Trumpf TruLaser 8000 Laser Cutting Machine Trumpf TruLaser 8000 Laser Cutting Machine
This Trumpf TruLaser 8000 Laser Cutting Machine was manufactured in Germany in the year 2013. It has 32628 hours of laser on, which 14316 hours are beam on. This machine can cut steel sheets up to 25 mm of thickness with a laser power of 6 kW. it...
Lasers
Bystronic BTL 3015 Bystronic BTL 3015
This Bystronic BTL 3015 Laser Cutting Machine was built in Switzerland in the year 2001. It operates through a control unit of the same brand. It performs with a CO2 laser power 3.5 kW. [Ref: FI-LAS-BYS-2001-00002]
Lasers
Bystronic BTL 4020 Bystronic BTL 4020
This Bystronic BTL 4020 Laser Cutting Machine was manufactured in the year 2001 in Switzerland. It has a record of 48730 production hours. This machine has a control unit of the same brand. It can work with a CO2 laser power 4 kW. [Ref:...
Lasers
Trumpf TRUMATIC L2530 Trumpf TRUMATIC L2530
This Trumpf TRUMATIC L2530 Laser Cutting Machine was manufactured in the year 2000 in Germany. This 2 axis machine is equipped with a control unit of the same brand. It works with a CO2 laser power 3000 kW. In the past, this machine has been working...
Lasers
Bystronic BySprint Fiber 4020 Laser cutting machine Bystronic BySprint Fiber 4020 Laser cutting machine
This Bystronic BySprint Fiber 4020 Laser cutting machine was built in 2014 in Switzerland. It has a production record of 10195 working hours. This machine is operated through a PHANNENBERG DTI9441 control unit. It has a laser power of 4 kW. [Ref:...
Lasers
Balliu LTC 13000 Laser cutting machine Balliu LTC 13000 Laser cutting machine
This Balliu LTC 13000 Laser cutting machine was built in the year 2004. It has approximately 73000 operating hours, of which 1500 are laser hours approximately. It is equipped with a Siemens control unit. The machine has a laser length capacity of...
Lasers
Trumpf Trumatic L 6030 Laser Cutting Machine Trumpf Trumatic L 6030 Laser Cutting Machine
This Trumpf Trumatic L 6030 Laser Cutting Machine was manufactured in the year 2005 in the United States. It has been working for 80102 hours. This machine works with a laser power 4kW. It is in very good working condition, ready for tests, always...
Lasers
AMADA Quattro Laser Fanuc C1000 Laser Cutting Machine AMADA Quattro Laser Fanuc C1000 Laser Cutting Machine
This AMADA Quattro Laser Fanuc C1000 Laser Cutting Machine was manufactured in the year 2003. It has been working for approximately 41000 hours. It is equipped with a Fanuc Series control unit. The machine operates with a laser power 1 kW. [Ref:...
Lasers
Trumpf TRUMATIC HSL 4002 C Laser cutting machine Trumpf TRUMATIC HSL 4002 C Laser cutting machine
This Trumpf TRUMATIC HSL 4002 C Laser cutting machine was built in Germany in 2005. It has about 28000 working hours per resonator. It is equipped with a new Siemens 840 D control unit. It operates with 2 laser power of 3.6 kW each one. A sheet...
Lasers
Trumpf TruLaser 1030 Laser Cutting Machine Trumpf TruLaser 1030 Laser Cutting Machine
This Trumpf TruLaser 1030 Laser Cutting Machine was manufactured in 2012 in the United States. This machine can operate with a laser power of 2,5 kW. It has been working for 9848 hours. It is equipped with fully automatic pallet changer and TruCoax...
Lasers
LVD IMPULS 8031 Laser Cutting Machine LVD IMPULS 8031 Laser Cutting Machine
This LVD IMPULS 8031 Laser Cutting Machine from Italy was manufactured in 2006. It is equipped with a FANUC 160 iLB control unit and it works with a source FANUC C4000 E ; 4KW. [Ref: IT-LAS-LVD-2006-00002]
Lasers
Bystronic Bystar 4020 4KW CO2 Laser Cutting Machine Bystronic Bystar 4020 4KW CO2 Laser Cutting Machine
This Bystronic Bystar 4020 4KW CO2 Laser Cutting Machine was made in 2001 in Switzerland. Equipped with a control unit of the same brand. It has a 13109 cutting hours and it works with a laser power of 4kW. Very good maintained machine. [Ref:...
Lasers
This Trumpf Trumatic L3050 Laser Cutting Machine This Trumpf Trumatic L3050 Laser Cutting Machine
This Trumpf Trumatic L3050 Laser Cutting Machine was manufactured in the year 2005. This machine works with a laser power of 5kW. Its maintenance has always been done by Trumpf. Replacement of lust frequency converter and the mecos with NEW RETROFIT...
Lasers
AMADA LC3015B3EU Laser Cutting Machine AMADA LC3015B3EU Laser Cutting Machine
This AMADA LC3015B3EU Laser Cutting Machine was manufactured in Germany in 1998. It has been working for 53209 hours. Also this machine works with a 3 kW of laser power and AS10510 PC automation. It counts with a sheet size of 3000 x 1500 mm and...
Lasers
Bystronic BTL 3500 Laser Cutting Machine Bystronic BTL 3500 Laser Cutting Machine
This Bystronic BTL 3500 Laser Cutting Machine was built in the year 1999 in Germany. This machine operates through a control unit of the same brand. It works with a 3500 Watt laser resonator. This machine has been on for 92707 hours, which 51710...
Lasers
This Durma HD-F 3015 BH 4kW Fiber Laser Cutting Machine This Durma HD-F 3015 BH 4kW Fiber Laser Cutting Machine
This Durma HD-F 3015 BH 4kW Fiber Laser Cutting Machine was made in 2019 in Turney. It is equipped with a Siemens Sinumerik 840D control unit. This machine can operate with a laser power of 4 kW. It work with automatic shuttle tables and precitec...
Lasers
ERMAKSAN  Fibermak Hawk 3015 1kw Fiber Laser Cutting Machine ERMAKSAN Fibermak Hawk 3015 1kw Fiber Laser Cutting Machine
This ERMAKSAN Fibermak Hawk 3015 1kw Fiber Laser Cutting Machine was manufactured in 2018 in Turkey. This machine works with a sheet size of 3000 x 1500 and also has a fiber resonator of 1 kW. [Ref: NL-LAS-ERM-2018-00001]
Lasers
AMADA FO 3015 Laser Cutting Machine AMADA FO 3015 Laser Cutting Machine
This AMADA FO 3015 Laser Cutting Machine was manufactured in Germany in 1996. It has been working for 20354 hours. Also this machine works with a resonator of 4,0kW CO2 Fanuc. It counts with a sheet size of 3000 x 1500 mm. [Ref:...
Lasers
Mazak stx-48 Mark II Laser Cutting Machine Mazak stx-48 Mark II Laser Cutting Machine
This Mazak stx-48 Mark II Laser Cutting Machine was built in 2000 in Japan. It's equipped with a Mazak Mazatrol control unit, this machine can perform with a laser power of 2.5 kW CO2 and also counts with a sheet size of 2500 x 1250 mm. Machine in...
Lasers
Prima Power Platino 1530 4,0kW CO2 Laser Cutting Machine Prima Power Platino 1530 4,0kW CO2 Laser Cutting Machine
This Prima Power Platino 1530 4,0kW CO2 Laser Cutting Machine was manufactured in Italy in the year 2012. It has 16475 cutting hours. This machine works with a laser power 4 kW CO2 and counts with a sheet size of 3000 x 1500 mm. [Ref:...
Lasers
Trumpf Trumatic L 6050 6kW CO2 Laser Cutting Machine Trumpf Trumatic L 6050 6kW CO2 Laser Cutting Machine
This Trumpf Trumatic L 6050 6kW CO2 Laser Cutting Machine was manufactured in 2005 in Germany. This machine can operate with a laser power of 6 kW and it has been working for 11529 hours. Also this machine it is equipped with a 10 inch and 7,5 inch...
Lasers
Bystronic BySprint Pro 4020 Laser Cutting Machine Bystronic BySprint Pro 4020 Laser Cutting Machine
This Bystronic BySprint Pro 4020 Laser Cutting Machine was manufactured in the year 2014 in Switzerland. It has a record of 15000 production hours. This machine has a control unit of the same brand and can work with a laser power of 4,4 kW. Also...
Lasers
Prima Power Rapido 5 Laser cutting machine Prima Power Rapido 5 Laser cutting machine
This Prima Power Rapido 5 Laser cutting machine was built in the year 2000. It has 36240 hours of which 34804 are working hours. It is operated through a Primach 9000L control unit. The machine works with a laser PRC of 2.2 kW. Includes an...
Lasers
Bystronic BTL 3500 Bystronic BTL 3500
This Bystronic BTL 3500 Laser Cutting Machine was built in the year 1998 in Switzerland. This machine operates through a control unit of the same brand. It can work with a laser power of 3.5 kW and a beam diameter 18.4 mm. This machine includes a...
Lasers
Trumpf TruLaser 3030 Laser Cutting Machine Trumpf TruLaser 3030 Laser Cutting Machine
This Trumpf TruLaser 3030 Laser Cutting Machine was manufactured in the year 2011 in Switzerland. It has been working for 34200 hours. This machine is equipped with a control unit of the same brand. It can work with a laser power of 3.2 KW. [Ref:...
Lasers
HPC Fibre Metal Laser Cutter (3561) HPC Fibre Metal Laser Cutter (3561)
HPC Fibre Metal Laser Cutter, Model LS1390. 2018, Capacity 1,300 x 900mm, Power 750 Watts, Max thickness of Mild Steel - 10mm, C/w chiller unit, Fume extractor, Machine dimensions 2,200 x 2,200 x 1,700mm high, 2,200kgs
Lasers
Fiber Laser Cutter 6kw Fiber Laser Cutter 6kw
P3015 High Cost-effective! --Working area 1500*3000mm --6kw IPG Laser source --Fully-covered CE stardard --Double table --Raytools automatic laser head --Bodorpro software --Japan YASKAWA servo motor --Automatic nozzle changing 6kw can cut... With video
Lasers
TRUMPF Model TruLaser 2030 CNC Laser Machine TRUMPF Model TruLaser 2030 CNC Laser Machine
1,250 x 3,000mm, 2,000W, Siemens CNC 840. New 2008
Lasers
TRUMPF LaserCell TLC 1005 3D CNC Laser Cutting Machine TRUMPF LaserCell TLC 1005 3D CNC Laser Cutting Machine
Laser power: 3,000W, table: 3,000 x 1,500mm, overall power demand: 75kVA. Year of production: 1999 Control: CNC Siemens 840 D
Lasers
AMADA LC3015 F1 4kW AMADA LC3015 F1 4kW
New 2010. Remanufactured 2018. Pallet changer, 4,000W output, extractor, AMNC/PC control, X=3,070 x 1,550 x 100mm, 170m/min rapids (21018) POA
Lasers
TRUMPF Trumatic L3050 CNC Laser Cutting Machine TRUMPF Trumatic L3050 CNC Laser Cutting Machine
Power: 5.0kW, table: 3,000 x 1,500mm Control: CNC Siemens 840D Year of production: 2006
Lasers
BYSTRONIC BySpeed 3015 CNC Laser Cutting Machine BYSTRONIC BySpeed 3015 CNC Laser Cutting Machine
Power: 4kW, table: 3,000 x 1,500mm Control: CNC Bystronic ByVision Year of production: 2007
Lasers
TRUMPF Trumabend V230 CNC Press Brake TRUMPF Trumabend V230 CNC Press Brake
Thrust: 230 T Year of production: 1998
Lasers
TRUMPF Trumatic L3030 CNC Laser Cutting Machine TRUMPF Trumatic L3030 CNC Laser Cutting Machine
Power: 2.7kW, table: 3,000 x 1,500mm, LoadMaster Year of production: 2004
Lasers
TRUMPF Trumatic L3030 CNC Laser Cutting Machine TRUMPF Trumatic L3030 CNC Laser Cutting Machine
Power: 4kW, table: 3,000 x 1,500mm, LoadMaster Year of production: 2005
Lasers
CNC Laser Cutting Machine TRUMPF Lasercell 1005, 3D. CNC Laser Cutting Machine TRUMPF Lasercell 1005, 3D.
Power: 2.7kW Year of production: 2003
Lasers
TRUMPF TRUMATIC HSL 2502 C TRUMPF TRUMATIC HSL 2502 C
Year of production: 2003 Made in: Germany Laser power: 2 x 3 200 W Table: 2 500 x 1 250 mm Overall power demand: 123 kVA Control: CNC SIEMENS
Lasers
TRUMPF TruLaser 3030 CNC Laser Cutting Machine TRUMPF TruLaser 3030 CNC Laser Cutting Machine
Laser power: 5kW, table working surface: 3,000 x 1,500mm, Loadmaster Year of production: 2011
Lasers
TRUMPF Lasercell 1005, 3D CNC Laser Cutting Machine TRUMPF Lasercell 1005, 3D CNC Laser Cutting Machine
Laser power: 2.7kW, Year of production: 2003
Lasers



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy