MG Welding

rss

Category: Machining centres

vertical CNC machining centre, CNC machining centre, horizontal CNC machining centre, VMC, HMC,

3 Axis Vertical Machining Centre.   Manufactured 2012.  Fanuc OI MD Control. 3 Axis Vertical Machining Centre. Manufactured 2012. Fanuc OI MD Control.
Manufacturer: DAHLIH Model: MCV 720 Serial No.: 3001023391 Year of Manufacture: November 2012 Control: Fanuc OI-MD Table size: 950mm x 560mm Longitudinal traverse: X Axis - 720mm Cross traverse: Y Axis = 460mm Vertical traverse: Z Axis =...
Machining centres
Vertical Machining Centre.  Heidenhain i530 Control.  Manufactured 2006 Vertical Machining Centre. Heidenhain i530 Control. Manufactured 2006
Manufacturer: DAHLIH Model: DL-MOV 1020BA Serial No.: 8001032704/8000RPM Year of Manufacture: February 2006 Control: Heidenhain i530 Table size: 1250mm x 660mm Table load: 1000 Kgs Longitudinal traverse: X Axis = 1020mm Cross traverse: Y...
Machining centres
3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control.  Approx table dimensions 1100mm x 558mm, 5 Tee slots.  X = 998mm, Y = 530mm, Z = 508mm Spindle ISO 50.  Spindle speed 10,000 rpm.  30 ATC.  Serial No. 125. 3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control. Approx table dimensions 1100mm x 558mm, 5 Tee slots. X = 998mm, Y = 530mm, Z = 508mm Spindle ISO 50. Spindle speed 10,000 rpm. 30 ATC. Serial No. 125.
Manufacturer: ENSHU Model: EV530 Year of Manufacture: 1999 Equipment: Tool Presetter, Daikin Chiller, Swarf Conveyor, Signal Tower & Wash Gun [Ref: J33780]
Machining centres
3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control.  Approx table dimensions 1100mm x 558mm, 5 Tee slots.  X = 998mm, Y = 530mm, Z = 508mm Spindle ISO 50.  Spindle speed 10,000 rpm.  30 ATC.  Serial No. 124 3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control. Approx table dimensions 1100mm x 558mm, 5 Tee slots. X = 998mm, Y = 530mm, Z = 508mm Spindle ISO 50. Spindle speed 10,000 rpm. 30 ATC. Serial No. 124
Manufacturer: ENSHU Model: EV530 Year of Manufacture: 1999 Equipment: Tool Presetter, Daikin Chiller, Swarf Conveyor, Signal Tower & Wash Gun [Ref: J33781]
Machining centres
3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control.  Approx table dimensions 1100mm x 558mm, 5 Tee slots.  X = 998mm, Y = 530mm, Z = 508mm Spindle ISO 50.  Spindle speed 10,000 rpm.  30 ATC.  Serial No. 123 3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control. Approx table dimensions 1100mm x 558mm, 5 Tee slots. X = 998mm, Y = 530mm, Z = 508mm Spindle ISO 50. Spindle speed 10,000 rpm. 30 ATC. Serial No. 123
Manufacturer: ENSHU Model: EV530 Year of Manufacture: 1999 Equipment: Tool Presetter, Daikin Chiller, Swarf Conveyor, Signal Tower & Wash Gun [Ref: J33782]
Machining centres
Twin Pallet 4 Axis CNC Horizontal Machining Centre with Fanuc 16-M Control.  Approx Table dimensions 400mm x 400mm.  X = 600mm, Y = 600mm, Z = 600mm, B = 360 degrees (1 degree increments).   Spidnle Nose BT40.  Spindle speed 13,000 rpm.  40 Station ATC.  Twin Pallet 4 Axis CNC Horizontal Machining Centre with Fanuc 16-M Control. Approx Table dimensions 400mm x 400mm. X = 600mm, Y = 600mm, Z = 600mm, B = 360 degrees (1 degree increments). Spidnle Nose BT40. Spindle speed 13,000 rpm. 40 Station ATC.
Manufacturer: ENSHU Model: JE60 Serial No.: 369 Year of Manufacture: 1999 Equipment: Tool Presetter, Daikin Chiller, Swarf Conveyor, Handwheel & Signal Tower [Ref: J33783]
Machining centres
Twin Pallet 4 Axis Horizontal Machining Centre with Fanuc 16-M Control.  Approx Table Dimensions 500mm x 500mm.  X = 800mm, Y = 800mm, Z = 800mm, B = 360degrees (1 degree increments).  Spindle HSK63-A.  Spindle speed 13,000 rpm.  40 Station ATC.  S/N 197 Twin Pallet 4 Axis Horizontal Machining Centre with Fanuc 16-M Control. Approx Table Dimensions 500mm x 500mm. X = 800mm, Y = 800mm, Z = 800mm, B = 360degrees (1 degree increments). Spindle HSK63-A. Spindle speed 13,000 rpm. 40 Station ATC. S/N 197
Manufacturer: ENSHU Model: JE80 Year of Manufacture: 1998 Equipment: Tool Presetter, Daikin Chiller, Swarf Conveyor, Handwheel & Signal Tower [Ref: J33785]
Machining centres
Twin Pallet 4 Axis Horizontal Machining Centre with Fanuc 16-M Control.  Approx Table Dimensions 500mm x 500mm.  X = 800mm, Y = 800mm, Z = 800mm, B = 360degrees (1 degree increments).  Spindle HSK63-A.  Spindle speed 13,000 rpm.  40 Station ATC.  S/N 247 Twin Pallet 4 Axis Horizontal Machining Centre with Fanuc 16-M Control. Approx Table Dimensions 500mm x 500mm. X = 800mm, Y = 800mm, Z = 800mm, B = 360degrees (1 degree increments). Spindle HSK63-A. Spindle speed 13,000 rpm. 40 Station ATC. S/N 247
Manufacturer: ENSHU Model: JE80 Year of Manufacture: 2001 Equipment: Tool Presetter, Daikin Chiller, Swarf Conveyor, Handwheel & Signal Tower [Ref: J33786]
Machining centres
3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control. .  X = 400mm, Y = 400mm, Z = 375mm. .  Manufactured 2002 3 Axis CNC Vertical Machining Centre with Fanuc 18I-M Control. . X = 400mm, Y = 400mm, Z = 375mm. . Manufactured 2002
Manufacturer: ENSHU Model: ES400 Serial No.: 132 Year of Manufacture: 2002 Control: Fanuc 18I-M Table size: 700mm x 400mm with 3 tee slots Spindle taper: HSK 40 Automatic tool changer: 30 Station Equipment: Tool Presetter, Daikin Chiller,...
Machining centres
4 Axis Horizontal Machining Centre.  Matsuura G Tech 30I Control.  X, Y, Z & B.  Manufactured 2006 4 Axis Horizontal Machining Centre. Matsuura G Tech 30I Control. X, Y, Z & B. Manufactured 2006
Manufacturer: MATSUURA Model: H Plus 405 [Ref: J34022]
Machining centres
Vertical Machining Centre.  Manufactured 2007.  Mazatrol 640M Control.  Serial No.199161 Vertical Machining Centre. Manufactured 2007. Mazatrol 640M Control. Serial No.199161
Manufacturer: MAZAK Model: VTC 300C-II Serial No.: 199161 Year of Manufacture: 2007 Control: Mazatrol 640m Table size: 2000mm x 760mm X Axis l traverse: 1740mm Y Axis traverse: 760mm Z Axis traverse: 660mm Speeds: 12000 rpm Feed rate: 36...
Machining centres
Horizontal Machining Centre. 400mm x 400mm Pallet. Fanuc 16iM 4 Axis Control (X,Y,Z & B)  CAT 40 Spindle.  60 ATC.  With Swarf Conveyor.  Serial No. 324.  Manufactured 1997 Horizontal Machining Centre. 400mm x 400mm Pallet. Fanuc 16iM 4 Axis Control (X,Y,Z & B) CAT 40 Spindle. 60 ATC. With Swarf Conveyor. Serial No. 324. Manufactured 1997
Manufacturer: OKK Model: HM40 [Ref: J34068]
Machining centres
POSmill POS E1100 Vertical Machining Center POSmill POS E1100 Vertical Machining Center
This POSmill POS E1100 Vertical Machining Center was manufactured in 2014. It equipped through a Heidenhain TNC 640i control unit. This machine can work with a spindle up to 15000 rpm. It includes a Lehmann 5-axis rotary table and Indunorm pallet...
Machining centres
POSmill H 500 U Vertical Machining Center POSmill H 500 U Vertical Machining Center
This POSmill H 500 U Vertical Machining Center was made in 2020 in Germany. It equipped with a Heidenhain TNC 640i control unit. This 5 axis machine can work with a spindle speed up to 12000 rpm. [Ref: DE-MIL-POS-2020-00001]
Machining centres
POSmill CE 1000 Vertical Machining Center POSmill CE 1000 Vertical Machining Center
This POSmill CE 1000 Vertical Machining Center was built in Germany in the year 2020. This 5 axis machine is operated through a Heidenhain TNC640 control unit. It can work with a spindle speed up to 10000 rpm. This machine includes 30 tool...
Machining centres
Hurco BMC 420 HT Vertical Machining Center Hurco BMC 420 HT Vertical Machining Center
This Hurco BMC 420 HT Vertical Machining Center was made in 2001. It counts with a spindle speed up to 8000 rpm. This 3 axis machine includes a capacity for 24 tools. [Ref: IT-MIL-HUR-2001-00001]
Machining centres
HAAS VF-2SS Vertical Machining Center HAAS VF-2SS Vertical Machining Center
This HAAS VF-2SS Vertical Machining Center was manufactured in 2019 in the United States. It has been working for 9958 hours. This 4 axis machine operates with a spindle speed range between 0-12000 rpm and a table with a dimension of 914 x 356 mm....
Machining centres
Doosan BM 2740M Vertical Machining Center Doosan BM 2740M Vertical Machining Center
This Doosan BM 2740M Vertical Machining Center was manufactured in the year 2018. This 3 axis machine operated through a FANUC 31i control unit. It incorporates a spindle speed up to 12000 rpm and a table size of 4000 x 2500 mm. This machine...
Machining centres
Doosan DNM 5700 Vertical Machining Center Doosan DNM 5700 Vertical Machining Center
This Doosan DNM 5700 Vertical Machining Center was built in Korea in the year 2018. It has been power on for 2969 hours, of which 1722 hours are running time, and 1504 hours are cutting time. This 4 axis machine equipped with a FANUC i Series...
Machining centres
Heckert HEC 400D Horizontal Machining Center Heckert HEC 400D Horizontal Machining Center
This Heckert HEC 400D Horizontal Machining Center was made in 2014. It is equipped with a Sinumerik 840 D control unit. This 4 axis machine can work with a spindle speed up to 10000 rpm. [Ref: DE-MIL-HEC-2014-00001]
Machining centres
CHIRON Mill 1250 Vertical Machining Center CHIRON Mill 1250 Vertical Machining Center
This CHIRON Mill 1250 Vertical Machining Center was manufactured in the year 2015. This 5 axis machine operates through a Siemens Sinumerik 840 D control unit. It has a spindle speed up to 12000 rpm. [Ref: DE-MIL-CHI-2015-00001]
Machining centres
ALMA SWITZERLAND Alma Hbz-500 ALMA SWITZERLAND Alma Hbz-500
This ALMA SWITZERLAND Alma Hbz-500 Universal Machining Center was manufactured in the year 1997. It has approximately 29000 working hours. This 3 axis machine operates with a spindle speed range 30-4000 rpm. [Ref: DE-MIL-ALM-1997-00001]
Machining centres
HAAS VF-2SSYT HAAS VF-2SSYT
This HAAS VF-2SSYT Vertical Machining Center was manufactured in the year 2019 in the United States. It operates with a spindle speed up to 12000 rpm and a table with a dimension of 914 x 457 mm. [Ref: AT-MIL-HAA-2019-00001]
Machining centres
Mazak VTC-820/30 Mazak VTC-820/30
This Mazak VTC-820/30 Vertical Machining Center was made in 2011 in the United Kingdom. It is equipped with a MAZATROL matrix nexus control unit. This 4 axis machine is capable of performing with a spindle speed up to 12000 rpm and a table size of...
Machining centres
Mazak VORTEX i-800V/8 Mazak VORTEX i-800V/8
This Mazak VORTEX i-800V/8 Vertical Machining Center from 2016 was made in Japan. This 5 axis machine is operated through a MAZATROL SMOOTH Ai control unit. It counts with a spindle speed up to 10000 rpm and a table load capacity of 500 kg. This...
Machining centres
GF AgieCharmilles Vertical Machining Center GF AgieCharmilles Vertical Machining Center
This GF AgieCharmilles Mikron HSM 700 Vertical Machining Center was made in Switzerland in 2013. This 3 axis machine is operated through a Heidenhain iTNC 530 control unit. It works with a spindle speed up to 42000 rpm. [Ref: KR-MIL-AGI-2013-00001]
Machining centres
HAAS VM-2 HAAS VM-2
This HAAS VM-2 Vertical Machining Center was built in 2008 in the United States. It has 21205 hours as feed cutting time, 4483 hours as power on time and 999 hours as cycle start time. This 5 axis machine can work with a cooling through spindle...
Machining centres
FANUC Alpha-D14MiA Machining Center FANUC Alpha-D14MiA Machining Center
This FANUC Alpha-D14MiA Machining Center was built in Japan in the year 2015. It is equipped with a control unit of the same brand. This machine can perform with a spindle speed up to 10000 rpm. [Ref: IN-MIL-FAN-2015-00001]
Machining centres
DECKEL MAHO DMC 60T DECKEL MAHO DMC 60T
This DECKEL MAHO DMC 60T Horizontal Machining Center was made in Germany in the year 2003. It has a total production record of 49138 hours. This 5 axis machine is operated through a HEIDENHAIN iTNC530 control unit. It works with a spindle speed up...
Machining centres
Doosan HP 5100 II Doosan HP 5100 II
This Doosan HP 5100 II Horizontal Machining Center from 2016 was built in Korea. It has a record of only 3070 cutting hours. This 4 axis machine is operated through a SIEMENS Sinumerik 840 control unit. It stands out for its spindle speed up to...
Machining centres
Mazak VTC-300C-II Mazak VTC-300C-II
This Mazak VTC-300C-II Vertical Machining Center was made in the United Kingdom in the year 2009. It is equipped with a MAZATROL 640M control unit. This 3 axis machine counts with a spindle speed up to 12000 rpm. It includes an interlocked guards...
Machining centres
Dugard LUNAN 500A Dugard LUNAN 500A
This Dugard LUNAN 500A vertical machine center was made in 2013. It is operated through a SIEMENS Sinumerik 828D control unit. This 3 axis machine has a spindle center to column of 360 mm and a table size of 800 x 320 mm. It is in very good working...
Machining centres
Hyundai Wia KF 6700 vertical machine center Hyundai Wia KF 6700 vertical machine center
This Hyundai Wia KF 6700 vertical machine center was built in the year 2019. It has been power on for 5339 hours, of which 1817 are cutting time. It is operated with a Fanuc Series 31i - MODEL B control unit. This 3 axis machine can work with a...
Machining centres
OKUMA GENOS M560R-V OKUMA GENOS M560R-V
This OKUMA GENOS M560R-V vertical machining center was made in Taiwan in 2015. This machine has a total of 13700 production hours. It is equipped with a OKUMA OSP-P300M-R control unit. This 4 axis machine works with a spindle speed up to 15000 rpm....
Machining centres
GROB G320 GROB G320
This GROB G320 Horizontal Machining Center was made in the year 2007 in Germany. It is operated through a SIEMENS 840 D control unit. This 5 axis machine equipped with A and B axis, can work with a spindle speed up to 18000 rpm. It includes a Kuka...
Machining centres
Mazak VARIAXIS J-600 Mazak VARIAXIS J-600
This Mazak VARIAXIS J-600 Vertical Machining Center was manufactured in 2017. This 5 axis machine has a record of 14433 hours, of which 4772 are auto operational time and 4574 are auto cutting time. It stands out for its spindle speed range 35-12000...
Machining centres
Doosan MYNX 6500/50 Doosan MYNX 6500/50
This Doosan MYNX 6500/50 Vertical Machining Center was manufactured in 2015. This 3 axis machine counts with 11444 hours, of which 6229 are cutting hours and 5590 are running time. It is operated through a FANUC Series 32i-MODEL B control unit. This...
Machining centres
Mazak Variaxis 630-5x II Mazak Variaxis 630-5x II
This Mazak Variaxis 630-5x II Universal Machining Center was manufactured in 2007 in Japan. This 5 axis machine has a record of 30986 production hours. It is operated through a MAZATROL MATRIX control unit. This machine stands out for its spindle...
Machining centres
Doosan VM750 Doosan VM750
This Doosan VM750 Vertical Machining Center was manufactured in Korea in the year 2008. This machine counts with a FANUC Series 18i-MB control unit. It incorporates a spindle speed up to 12000 rpm and a table size of 1600 x 800 mm. This machine...
Machining centres
MAXMILL QMC-600 MAXMILL QMC-600
This MAXMILL QMC-600 Vertical Machining Center was built in Taiwan in the year 2017. It is operated through a FAGOR 8055 control unit with 10.4'' LCD screen and transportable handwheel. This machine stands out for its spindle speed up to 12000 rpm...
Machining centres
TBI VC610 Start Mill Vertical Machine Center TBI VC610 Start Mill Vertical Machine Center
This TBI VC610 Start Mill Vertical Machine Center was manufactured in the year 2016 (the first installation and startup in 2017). It has been working for approximately 4000 hours. This 3 axis machine operates through a Siemens Sinumerik 828D control...
Machining centres
Quaser MV184P Quaser MV184P
This Quaser MV184P Vertical Machining Center from 2015 was built in Taiwan. It is equipped with a SIEMENS SINUMERIK 828D control unit. This 5 axis machine can work with a spindle speed range 9000-20000 rpm and a table dimension of 1200 x 600 mm. ...
Machining centres
HAAS VF-3 SSYT vertical machining center HAAS VF-3 SSYT vertical machining center
This HAAS VF-3 SSYT vertical machining center was manufactured in the United States in the year 2019. It has only 2001 production hours, of which 431 are cutting hours. This 3 axis machine is operated through a control unit of the same brand. It has...
Machining centres
HAAS VF-4SS HAAS VF-4SS
This HAAS VF-4SS vertical machining center was manufactured in the United States in the year 2015. It has a record of 4133 production hours. This 3 axis machine is operated through a control unit of the same brand. It has a spindle speed up to 12000...
Machining centres
FIRST MCV 1500 Vertical Machining Center FIRST MCV 1500 Vertical Machining Center
This FIRST MCV 1500 Vertical Machining Center was built in the year 2005. It is equipped with a HEIDENHAIN TNC 530 control unit. This 3 axis machine can work with a spindle speed up to 7500 rpm, and a size table 1760 x 710 mm. [Ref:...
Machining centres
FomIndustrie DALI 70 FomIndustrie DALI 70
This FomIndustrie DALI 70 Universal Machining Center was manufactured in Italy in the year 2010. It has a working record of 20000 hours. This 4 axis CNC machining center is equipped with a hp control unit. It works with a spindle speed up to 12000...
Machining centres
Hurco VMX30 UHSi Vertical Machine Center Hurco VMX30 UHSi Vertical Machine Center
This Hurco VMX30 UHSi Vertical Machine Center was manufactured in the year 2014. This 5 axis machine operates through a Winmax control unit. The machine has a spindle speed up to 18000 rpm. It has capacity for 24 tools. [Ref: IT-MIL-HUR-2014-00001]
Machining centres
Starrag SX-051B Starrag SX-051B
This Starrag SX-051B Horizontal Machining Center was built in 2002. It is operated through a SIEMENS 840 D control unit. This 5 axis machine works with a spindle speed up to 15000 rpm. It includes a EDGECAM postprocessor and some tool holders. ...
Machining centres
Mazak H-400N Mazak H-400N
This Mazak H-400N Horizontal Machining Center from the year 1991 was manufactured in Japan. This 3 axis machine is operated through a MAZATROL M-32 control unit. It works with a spindle speed up to 10000 rpm and a table dimension of 400 x 400 mm....
Machining centres
Quaser HX504II BP Quaser HX504II BP
This Quaser HX504II BP Horizontal Machining Center was made in 2014. It is equipped with a FANUC 18iMB control unit. This 4 axis machine can work with a spindle speed up to 12000 rpm and comes with an air conditioner for electrical cabinet. [Ref:...
Machining centres
Mazak FF510 Mazak FF510
This Mazak FF510 Horizontal Machining Center was built in 1998 in Japan. It is operated through a FANUC 18i-M control unit. This 3 axis machine can work with a spindle speed up to 15000 rpm and a table dimension 400 x 400 mm. It is in good working...
Machining centres
Mazak FF-660 Mazak FF-660
This Mazak FF-660 Horizontal Machining Center was manufactured in 1999 in Japan. It is equipped with a FANUC 18i-M control unit. This 3 axis machine works with a spindle speed up to 15000 rpm and a table dimension 500 x 500 mm. It is in good working...
Machining centres
Doosan DNM 350/5AX Doosan DNM 350/5AX
This Doosan DNM 350/5AX Universal Machining Center was manufactured in 2017 in Korea. This 5 axis machine is operated through a FANUC Series 31i-MODEL B5 control unit. It works with a spindle speed up to 20000 rpm and a table size F 350 mm. This...
Machining centres
DMG MORI DMC 1035V Ecoline vertical machine center DMG MORI DMC 1035V Ecoline vertical machine center
This DMG MORI DMC 1035V Ecoline vertical machine center was built in Poland in the year 2014. This 3 axis machine has been on for approximately 16184 hours, of which 6804 hours are spindle time. It is equipped with a SIEMENS 840D SLIMline control...
Machining centres
Hartford MVP16 Vertical Machining Center Hartford MVP16 Vertical Machining Center
This Hartford MVP16 Vertical Machining Center was made in 2015. It is equipped with a Fanuc control unit. This 5 axis machine can work with a spindle speed up to 12000 rpm. It is in good condition. [Ref: IT-MIL-HAR-2015-00001]
Machining centres
BIESSE ROVER 24 S BIESSE ROVER 24 S
This BIESSE ROVER 24 S Machine Center with traverse table from 2001 was built in Italy. It is equipped with a XNC control unit. This machine works with a working range 3060 x 1300 mm. It is functional and includes a metal table for dusting milled...
Machining centres
Hyundai Wia F500 PLUS Hyundai Wia F500 PLUS
This Hyundai Wia F500 PLUS Vertical Machining Center was built in Korea in the year 2017. It has been working for only approximately 500 hours. This 3 axis machine is operated through a HYUNDAI WIA FANUC i Series control unit. It can work with a...
Machining centres
Hurco DCX32-5Si Hurco DCX32-5Si
This Hurco DCX32-5Si Dual Column 5 Axis Universal Machining Center was manufactured in 2015 in Taiwan. It has 16595 working hours, of which 8370 are spindle hours. This machine is equipped with a control unit of the same brand. It operates with a...
Machining centres
DECKEL MAHO DMF 300 linear DECKEL MAHO DMF 300 linear
This DECKEL MAHO DMF 300 linear vertical machining center was manufactured in Germany in the year 2004. This 3 axis machine has a total of 55365 operating hours, of which 22369 are spindle hours. It is operated through a Heidenhain iTNC 530 control...
Machining centres
MIKRON Mill E 700 U MIKRON Mill E 700 U
This MIKRON Mill E 700 U Vertical Machining Center was built in 2019. This 5 axis machine operates through a HEIDENHAIN iTNC 530 control unit. It works with a spindle speed up to 20000 rpm. This machine is like new. [Ref: GB-MIL-MIK-2019-00001]
Machining centres
Hyundai Wia VX500 Hyundai Wia VX500
This Hyundai Wia VX500 Vertical Machining Center was built in 2008. This 3 axis machine had 4 axis in the past that's why the Fanuc AMP (A axis) is included so it can work with 4 axis if an NC rotary table is added. [Ref: KR-MIL-HYU-2008-00001]
Machining centres
Doosan VC630/5AX Doosan VC630/5AX
This Doosan VC630/5AX vertical machining center was manufactured in Korea in 2011. This 5 axis machine is operated through a HEIDENHAIN iTNC530 control unit. It has a spindle speed up to 20000 rpm and a table size F630 mm. This machine includes its...
Machining centres
KIHEUNG Combi-U7 Vertical Machine Center KIHEUNG Combi-U7 Vertical Machine Center
This KIHEUNG Combi-U7 Vertical Machine Center was manufactured in South Korea in the year 2016. It has only 3781 of working hours, of which 988 are spindle hours. This 3 axis machine operates through a Heidenhain iTNC 620 control unit. It has a...
Machining centres
TOS Prima TOS Prima
This TOS Prima horizontal machining center was built in 2007 in Czech Republic. It has a total of 65471 hours, of which 21744 are spindle hours. It is operated through a HEIDENHAIN iTNC 530 control unit. This 5 axis machine can perform with a...
Machining centres
Mazak HCN-5000/50 Mazak HCN-5000/50
This Mazak HCN-5000/50 Horizontal Machining Center was built in the year 2019 in Japan. It counts with 4098 power on hours, of which only 2395 are cutting hours. This 4 axis machine is operated thorugh a Mazatrol Smooth G control unit. It can work...
Machining centres
Hyundai Wia KH63G Hyundai Wia KH63G
This Hyundai Wia KH63G Horizontal Machining Center was built in the year 2014 in South Korea. It has been on for 5500 hours, of which 3000 are spindle hours. It is operated through a FANUC 31 control unit. This 4 axis machine comes with a spindle...
Machining centres
TOS VARNSDORF WHQ 13 CNC TOS VARNSDORF WHQ 13 CNC
This TOS VARNSDORF WHQ 13 CNC horizontal milling and boring machine was manufactured in Czech Republic in the year 2013. It has been on for 46960 hours, of which 15726 are spindle hours. It is operated through a SIEMENS SINUMERIK 840D control unit....
Machining centres
Bridgeport VMC 600/22 Digital Bridgeport VMC 600/22 Digital
This Bridgeport VMC 600/22 Digital Vertical Machine Center was manufactured in United Kingdom in the year 1999. This 4 axis machine works with a HEIDENHAIN TNC426 control unit. It operates with a spindle speed up to 6000 rpm. This machine has been...
Machining centres
Bridgeport VMC 560/16 Bridgeport VMC 560/16
This Bridgeport VMC 560/16 Vertical Machine Center was built in United Kingdom in the year 1992. This 3 axis machine operates through a Heidenhain CNC2500 control unit. It has a spindle speed up to 6000 rpm. This machine has mainly worked in the...
Machining centres
Matec 30 HVS Matec 30 HVS
This Matec 30 HVS Machining center and Turning milling center was manufactured in Germany in the year 2008. It is equipped with a Bosch Rexroth MTX OSA3 control unit. This 7 axis machine operates with a spindle speed up to 8000 rpm. It is in very...
Machining centres
Akira Seiki V5.5 Vertical Machining Center Akira Seiki V5.5 Vertical Machining Center
This Akira Seiki V5.5 Vertical Machining Center was built in 2010 in Taiwan. Operated with a Mitsubishi M70 control unit. This 5 axis machine can perform with a spindle speed up to 12000 rpm and is prepared for working with 6 axis. [Ref:...
Machining centres
Brother TC-S2A Brother TC-S2A
This Brother TC-S2A Vertical Machining Center from 2003 was made in Japan. It has been working for only 15200 hours. This 3 axis machine is equipped with a Brother A00 control unit. It can operate with a spindle speed up to 10000 rpm. This machine...
Machining centres
Quaser MV214P/12B Quaser MV214P/12B
This Quaser MV214P/12B Vertical Machining Center from 2018 was manufactured in Taiwan. It has a record of 5773 hours, of which 2627 are spindle hours. This 3 axis machine is operated through a HEIDENHAIN iTNC 640 control unit. It works with a...
Machining centres
HAAS VF-2SS HAAS VF-2SS
This HAAS VF-2SS vertical machining center was manufactured in the year 2017 in the United States. It has a record of 10000 hours, of which only 1100 are production time. This 3 axis machine has a spindle speed up to 12000 rpm and working table...
Machining centres
Mazak 430A Mazak 430A
This Mazak 430A Vertical Machining Center was manufactured in the United Kingdom in 2014. It has been used for only 680 hours. This 3 axis machine operates through a MAZATROL smart control unit. It can work with a spindle speed up to 12000 rpm. ...
Machining centres
Brother SPEEDIO M140X2 Brother SPEEDIO M140X2
This Brother SPEEDIO M140X2 Vertical Machining Center from 2018 was manufactured in Japan. It has been working for 1194 hours. It is operated through a brother CNC INTERFACE control unit. This machine can operate with a spindle speed up to 10000...
Machining centres
Bridgeport VMC 1000/30 Bridgeport VMC 1000/30
This Bridgeport VMC 1000/30 Vertical Machine Center was made in the year 2000 in the United Kingdom. It has a production record of 56378 hours, of which 12514 are spindle hours. This 3 axis machine is equipped with a HEIDENHAIN 426 control unit. It...
Machining centres
Victor Vcenter-102 Victor Vcenter-102
This Victor Vcenter-102 Vertical Machining Center was manufactured in 2018. It is equipped with a FANUC Series 0I control unit. This 3 axis machine operates with a spindle speed up to 6000 rpm and a high pressure system through the 20 BAR spindle...
Machining centres
Mazak VARIAXIS 730-5X Mazak VARIAXIS 730-5X
This Mazak VARIAXIS 730-5X Vertical Machining Center was manufactured in 2007. This simultaneous 5 axis machine is operated through a Mazatrol 640M control unit. It works with a spindle speed up to 10000 rpm and a high pressure system through the 20...
Machining centres
HAAS EC-400 HAAS EC-400
This HAAS EC-400 Horizontal Machining Center was manufactured in the year 2007 in the United States. It is operated through a control unit of the same brand. This machine incorporates 4 axis and works with a spindle speed up to 12000 rpm. Renishaw...
Machining centres
ELMAG S400-CNC Vertical Machining Center ELMAG S400-CNC Vertical Machining Center
This ELMAG S400-CNC Vertical Machining Center was manufactured in Austria in the year 2019. It counts with approximately 500 working hours. This 3 axis machine operates through a Siemens SINUMERIK 808D control unit. It incorporates a spindle speed...
Machining centres
Dugard Eagle 1000 Vertical Machining Center Dugard Eagle 1000 Vertical Machining Center
This Dugard Eagle 1000 Vertical Machining Center was built in 2010. This 3 axis machine is equipped with a FANUC Series Oi-MD control unit. It incorporates a spindle speed up to 8000 rpm. This machine is in very good working condition, ready for...
Machining centres
Enshu EV-450 Vertical Machining Center Enshu EV-450 Vertical Machining Center
This Enshu EV-450 Vertical Machining Center was manufactured in the year 2004 in Japan. It is equipped with a J-100M control unit. This 3 axis machine can work with a BT-40 head with 10.000 rpm and 7,5 Kw. It comes with 2 pallets of 530 x 400 mm,...
Machining centres
Doosan DNM 4500 Vertical Machining Center Doosan DNM 4500 Vertical Machining Center
This Doosan DNM 4500 Vertical Machining Center was made in 2020. This 4 axis machine operates through a DOOSAN - FANUC i Series control unit. It has a spindle speed up to 12000 rpm. The machine comes with a spindle head cooling system and manual...
Machining centres
Kitamura Mycenter HX630L Horizontal Machining Center Kitamura Mycenter HX630L Horizontal Machining Center
This Kitamura Mycenter HX630L Horizontal Machining Center was made in the year 2004. It is equipped with a Fanuc Series 16 iMB control unit. It has 12881 of cutting hours. This 4 axis machine incorporates a table of 630 x 630 mm and can perform with...
Machining centres
Mazak VTC-800/20SR Milling Mazak VTC-800/20SR Milling
This Mazak VTC-800/20SR Vertical machining center was manufactured in the year 2015. It has a total of 26095 working hours. It operates through a Mazatrol matrix 2 control unit. This 5 axis machine can work with a spindle speed 18000 rpm. The...
Machining centres
YCM NSV 102 A Vertical Machining Center YCM NSV 102 A Vertical Machining Center
This YCM NSV 102 A Vertical Machining Center was built in the year 2012 in Taiwan. It has only 445 working hours. It is equipped with a Fanuc control unit. This 3 axis machine can operate with a speed up to 12000 rpm. [Ref: NL-MIL-YCM-2012-00001]
Machining centres
Matsuura ES 450-H2 horizontal machine center Matsuura ES 450-H2 horizontal machine center
This Matsuura ES 450-H2 horizontal machine center was manufactured in the year 2000. It has been working for approximately 14500 hours. It is operated through a Fanuc Series 18i-M control unit. This machine counts with a spindle speed range up to...
Machining centres
MICROCUT V-20G Vertical Machining Center MICROCUT V-20G Vertical Machining Center
This MICROCUT V-20G Vertical Machining Center was built in the year 2014 in Taiwan. It is equipped with a Heidenhain 530 control unit. It has 10040 spindle hours. This machine incorporates a spindle speed up to 25000 rpm. [Ref:...
Machining centres
DECKEL MAHO DMU 70 eVolution DECKEL MAHO DMU 70 eVolution
This DECKEL MAHO DMU 70 eVolution Vertical Machine Center was manufactured in the year 2001. it has been working for approximately 12500 hours. The machine operates through a SIEMENS 840 control unit. This 5 axis machine can work with a spindle...
Machining centres
KOVOSVIT MAS MCV 1000 Quick Milling KOVOSVIT MAS MCV 1000 Quick Milling
This KOVOSVIT MAS MCV 1000 Quick Vertical Machining center was manufactured in 2004. This 3 axis machine is operated through a Heidenhain iTNC 530 control unit. The machine has a spindle speed up to 10000 rpm. The machine is in very good conditions...
Machining centres
STAMA MC536/Twin STAMA MC536/Twin
This STAMA MC536/Twin vertical machining machine was built in 2007. This 3 axis machine is operated through a SIEMENS SINUMERIK control unit. This machine has a spindle speed range 0-10000 rpm. [Ref: DE-MIL-STA-2007-00001]
Machining centres
DECKEL MAHO DMC 60H DECKEL MAHO DMC 60H
This DECKEL MAHO DMC 60H Universal Machining Center was built in Germany in the year 1999. It has a total production time of 48364 hours. This 4 axis machine is operated through a SIEMENS SINUMERIK 840D Control Unit. It can work with a spindle speed...
Machining centres
Bridgeport VMC 1500XP Vertical Machining Center Bridgeport VMC 1500XP Vertical Machining Center
This Bridgeport VMC 1500XP Vertical Machining Center was made in the year 2007 in the United Kingdom. It has been on for 60009 hours, of which 15280 are spindle hours. It is equipped with a Heidenhain iTNC 530 control unit. This 3 axis Machine...
Machining centres
Hyundai Wia KF 6700B/50 vertical machine center Hyundai Wia KF 6700B/50 vertical machine center
This Hyundai Wia KF 6700B/50 vertical machine center was built in the year 2020. It has been on for only 946 hours, of which 301 are cutting time. This 3 axis machine runs through a Fanuc i Series control unit. It has a spindle speed up to 8000...
Machining centres
PADE UNI 5 concept Milling PADE UNI 5 concept Milling
This PADE UNI 5 concept Universal Machine Center was manufactured in 2002. It is operated through a CNC NUM 1040 W.1 PC version control unit. This 6 axis machine has a spindle speed up to 18000 rpm. It has a CNC NUM 1040 Standard feature and a ...
Machining centres
Brother TC-S2C-0 Brother TC-S2C-0
This Brother TC-S2C-0 Vertical Machining Center was manufactured in the year 2007. It is equipped with a brother CNC B00 control unit. This 4 axis machine incorporates 21 slots in storage and can work with a spindle speed up to 10000 rpm. This...
Machining centres
Rye Pentaxial 1710TP Milling Rye Pentaxial 1710TP Milling
This Rye Pentaxial 1710TP Universal Machining Center was manufactured in 1998. This 6 axis machine is controlled through a BWO CNC900C Control unit. This model has a turning speed range of 1000-18000 rpm. The machine is in excellent condition of...
Machining centres
Hurco VMX 60U Vertical Machining Center Hurco VMX 60U Vertical Machining Center
This Hurco VMX 60U Vertical Machining Center was made in 2013 in the United Kingdom. It has a working history of 13209 production hours. It is equipped with a Hurco WinMax control unit. This 5 axis machine can work with a spindle speed up to 12000...
Machining centres
Mazak Integrex 800V/5 II E Horizontal Machining Center Mazak Integrex 800V/5 II E Horizontal Machining Center
This Mazak Integrex 800V/5 II E Horizontal Machining Center was manufactured in the year 2008 in Japan. It counts with 16088 hours, of which 4573 are cutting time. It is equipped with MAZATROL MATRIX control unit. This machine can work with a...
Machining centres
Mazak FJV-25 Vertical Machining Center Mazak FJV-25 Vertical Machining Center
This Mazak FJV-25 Vertical Machining Center was made in Japan in 1997. Equipped with a Mazak Mazatrol M Plus Control unit, this powerful machine incorporates a spindle speed up to 25000 rpm. [Ref: IE-MIL-MAZ-1997-00001]
Machining centres
Mazak VTC-800/30SR Vertical Machining Center Mazak VTC-800/30SR Vertical Machining Center
This Mazak VTC-800/30SR Vertical Machining Center was manufactured in 2010 in the United Kingdom and has been working for 41865 hours. Equipped with a Mazatrol Matrix Control unit, this 5 axis machine is capable of performing with a spindle speed up...
Machining centres
FEHLMANN PICOMAX 82 CNC FEHLMANN PICOMAX 82 CNC
This FEHLMANN PICOMAX 82 CNC Vertical Machining Center was built in the year 1997 in Switzerland. It has a record of 41785 hours, of which approximately 19005 are spindle hours. This 3 axis machine is equipped with a HEIDENHAIN TNC 426 control unit....
Machining centres
POS POSmill C1050 POS POSmill C1050
This POS POSmill C1050 Vertical Machining Center was built in the year 2012. It has a total of 6709 spindle running hours. This 3 axis machine is operated through a Heidenhein control unit. It performs with a spindle speed up to 8000 rpm. This...
Machining centres
Okuma ACE Center MF-46VA Okuma ACE Center MF-46VA
This Okuma ACE Center MF-46VA Universal Machining Center from 2011 was manufactured in Japan. It is operated through an Okuma OSP-T 200 M control unit. This 3 axis machine can operate with a spindle speed up to 12000 rpm. [Ref:...
Machining centres
OKUMA MX-55 VA vertical machining center OKUMA MX-55 VA vertical machining center
This OKUMA MX-55 VA vertical machining center was built in 2000. It is operated through a OKUMA OSP-U10M control unit. This 3 axis machine has a spindle speed up to 15000 rpm. This machine has a table size 1300 x560 mm. [Ref: IL-MIL-OKU-2000-00002]
Machining centres
POS POSmill 1100 Vertical Machining Center POS POSmill 1100 Vertical Machining Center
This POS POSmill 1100 Vertical Machining Center was manufactured in the year 2009 in Germany. It is operated through a Heidenhein TNC 640 control unit. This machine counts with a spindle speed up to 10000 rpm. [Ref: DE-MIL-POS-2009-00001]
Machining centres
Makino a61nx horizontal machining center Makino a61nx horizontal machining center
This Makino a61nx horizontal machining center was manufactured in 2014. The 4 axis machine has 9800 power on hours. It is operated through a MAKINO Professional 5 control unit. It has a spindle speed up to 15000 rpm. The machine is in very good,...
Machining centres
Doosan MYNX 7500/50 Doosan MYNX 7500/50
This Doosan MYNX 7500/50 vertical machining center was built in 2012 in Korea. This 3 axis machine is equipped with a FANUC Series 32i - MODEL A control unit. It has a spindle speed up to 12000 rpm. This machine includes its manual books. [Ref:...
Machining centres
Johnford VMC 650A Johnford VMC 650A
This Johnford VMC 650A Vertical Machining Center was built in the year 1998. It has a production history of approximately 38000 working hours. This 3 axis machine is operated through a FANUC Series O-M Control unit. It can work with a spindle speed...
Machining centres
SMEC LCV 650 SMEC LCV 650
This SMEC LCV 650 Vertical Machining Center was manufactured in the year 2018. It is equipped with a FANUC Series Oi-MF control unit. This machine incorporates a spindle speed range up to 8000 rpm. It has a production history of approximately 5487...
Machining centres
Doosan VM 960L Doosan VM 960L
This Doosan VM 960L vertical machining center was built in Korea in the year 2009. This 3 axis machine has a total of 57028 production hours, of which approximately 22797 are running hours and 30431 are cutting hours. It is operated through a FANUC...
Machining centres
KAOMING KMC 1500 V vertical machining center KAOMING KMC 1500 V vertical machining center
This KAOMING KMC 1500 V vertical machining center was manufactured in 2018. The 3 axis machine has a total of 1200 production hours . It has a spindle speed up to 4400 rpm. [Ref: DE-MIL-KAO-2018-00001]
Machining centres
Matec 30 L Matec 30 L
This Matec 30 L Vertical Machining Center was manufactured in Germany in 1996. It counts with 14869 production hours. This 3 axis machine is equipped with a HEIDENHAIN TNC 426 control unit. [Ref: FI-MIL-MAT-1996-00001]
Machining centres
MIKRON HPM 800U Vertical Machining Center MIKRON HPM 800U Vertical Machining Center
This MIKRON HPM 800U Vertical Machining Center was made in the year 2010 in Switzerland. It is equipped with a Heidenhain iTNC 530 control unit. This machine incorporates a spindle speed range up to 20,000 rpm. It presents very good working...
Machining centres
DECKEL MAHO DMC 70 H duoBLOCK DECKEL MAHO DMC 70 H duoBLOCK
This DECKEL MAHO DMC 70 H duoBLOCK Horizontal Machining Center was built in Germany in 2008. This machine has a total production time of 63082 hours of which 33239 are spindle hours. It is operated through a DMG SIEMENS 840D power line Control unit....
Machining centres
Mazak FH-4800 Mazak FH-4800
This Mazak FH-4800 Horizontal Machining Center was built in the year 2000 in the United Kingdom. This 4 axis machine can work with a spindle speed up to 12000 rpm and a travel speed of 30000 mm/mn. It is equipped with a MAZATROL 640M PC-FUSION-CNC....
Machining centres
Müga S500 Vertical Machining Center Müga S500 Vertical Machining Center
This Müga S500 Vertical Machining Center was built in 2004. This machine is operated through a control unit of the same brand. This 3 + 4 axis machine can work with a spindle speed range of 60 - 12000 rpm. [Ref: DE-MIL-MUG-2004-00002]
Machining centres
DMG MORI DMU40 eVo  Vertical Machining Center DMG MORI DMU40 eVo Vertical Machining Center
This DMG MORI DMU40 eVo Vertical Machining Center was manufactured in 2013. It has 17300 spindle hours. The 5 axis machine operates through a Heidenhain 530 control unit. The machine has a spindle speed up to 18,000 rpm. It has a 3D quickset ready...
Machining centres
Doosan NHP 6300 horizontal machining center Doosan NHP 6300 horizontal machining center
This Doosan NHP 6300 horizontal machining center was manufactured in 2018 in South Korea. It has 590 power on hours, of which 205 are running hours and 169 are cutting hours. This 5 axis machine is operated through a FANUC-31iB5 control unit. It has...
Machining centres
Kitamura Spark Mycenter 3XiF Kitamura Spark Mycenter 3XiF
This Kitamura Spark Mycenter 3XiF Vertical Machining Center was manufactered in the year 2005. This 3 axis machine is operated through a Fanuc Series 16i-MB control unit. This machine can work with a spindle speed range up to 20000 rpm. [Ref:...
Machining centres
Hurco VM 1 Vertical Machining Center Hurco VM 1 Vertical Machining Center
This Hurco VM 1 Vertical Machining Center was built in Taiwan in 2006 and has been operative for 16610 hours. This machine performs with a spindle speed range up to 10000 rpm. [Ref: CZ-MIL-HUR-2006-00001]
Machining centres
Jobs Jomach 131 Milling Jobs Jomach 131 Milling
This Jobs Jomach 131 Universal Machine center was manufactured in 2002. It has a production record of 73532 working hours, of which 15283 are spindle hours. It is equipped with a FIDIA V5 control unit. The 5 axis machine works with a speed of 16000...
Machining centres
Mazak VTC 800/30 SR Vertical Machining Center Mazak VTC 800/30 SR Vertical Machining Center
This Mazak VTC 800/30 SR Vertical Machining Center was made in the year 2008. It is equipped with a Mazatrol Matrix control unit. It has been on for 28495, of which 14323 are spindle hours. This 5 axis machine is capable of performing with a spindle...
Machining centres
Wele SB-316M Vertical Machining Center Wele SB-316M Vertical Machining Center
This Wele SB-316M Vertical Machining Center, produced in the year 2013. It is equipped with a Fanuc Series 31 iB control unit. This machine can work with a spindle speed range up to 6000 rpm. It presents good conditions. [Ref:...
Machining centres
DECKEL MAHO DMC 65V Vertical Machining Center DECKEL MAHO DMC 65V Vertical Machining Center
This DECKEL MAHO DMC 65V Vertical Machining Center was built in Germany in 2001. This 3 axis machine can operate with a spindle speed up to 18000 rpm. [Ref: ES-MIL-DEC-2001-00002]
Machining centres
DECKEL MAHO DMU 60P hi-dyn Vertical Machining Center DECKEL MAHO DMU 60P hi-dyn Vertical Machining Center
This DECKEL MAHO DMU 60P hi-dyn Vertical Machining Center was built in the 2001. It is equipped with a Heidenhain TNC-430 control unit. This 5 axis machine can perform with a spindle speed up to 12000 rpm. Machine totally revised and tuned for its...
Machining centres
Kitamura Mycenter HX250i Horizontal Machining Center Kitamura Mycenter HX250i Horizontal Machining Center
This Kitamura Mycenter HX250i Horizontal Machining Center was made in Japan in 2002. This machine incorporates a table of 254x254 mm and can perform with a spindle speed up to 15000 rpm. [Ref: IE-MIL-KIT-2002-00001]
Machining centres
Hyundai Kia VX510M Lathe Hyundai Kia VX510M Lathe
This Hyundai Kia VX510M Lathe was made in Korea in the year 2007. It has 14158 hours of cutting time. It is operated through a Fanuc Series 21i-MB control unit. This machine can perform with a spindle speed range up to 12000 rpm. [Ref:...
Machining centres
TOS TRENCÍN MC 100 V TOS TRENCÍN MC 100 V
This TOS TRENCÍN MC 100 V vertical machining center was manufactured in 1996 in Slovakia. This machine is operated through a Heidenhain TNC 415 control unit. It has a spindle speed range 5 - 8000 rpm. [Ref: FI-MIL-TOS-1996-00001]
Machining centres
Makino MCD 1816 4-AXIS CNC Horizontal Machining Center Makino MCD 1816 4-AXIS CNC Horizontal Machining Center
Serial No. 141; Year 2006; Fanuc Professional 5-CNC Control; 16 Pallets, dimensions 1.300 x 1.300 mm; travels X= 1.800, Y= 1.600 Z=1.300, W= 300 mm; NC rotation 0, 0001 degr.; spindle speeds 10 – 4.000 rpm; spindle taper BT50;... With video
Machining centres
Heller MCT 160 Horizontal Double Spindle Machining Center Heller MCT 160 Horizontal Double Spindle Machining Center
Control system, make Siemens, type Sinumeric 840D, 2 spindles, spindle speed 0 - 10,000 rpm, tool holding fixture HSK-A63, spindle distance ??, IKZ 70 bar, travel X/Y/Z 450/450/450 mm, universal turn/swivel table (4.+5. axis), mechanical tool...
Machining centres
HERMLE C 800 U 5 Axis Machining Center HERMLE C 800 U 5 Axis Machining Center
W/ control HEIDENHAIN iTNC530, internal spindel cooling, chip conveyor, X/Y/Z-travel 800/600/500 mm, table surface area l x w - 1000 x 560 mm, NC swivel rotary table Ø 630 mm, swivel range -20° / +90°, STARK quick release plate approx. 540 x 540 x...
Machining centres
HAAS VM-3 Vertical Machining Center HAAS VM-3 Vertical Machining Center
Comes with HAAS TR 160 2 axis turn and swivel table for full 4th and 5th axis operations, RENISHAW probe, and tool measuring device. Travel (X/Y/Z): 1016/660/635 mm, thurst (X/Y/Z): approx. 18 kN, rapids (X/Y/Z): up to 18 m/min, spindle speed: up to...
Machining centres
DOOSAN DNM650 Vertical Machining Centre (2012) DOOSAN DNM650 Vertical Machining Centre (2012)
Traverses X Y Z: 1,270 x 670 x 625mm, table 1,300 x 670mm, spindle speed 12,000rpm, BT40 spindle taper, spindle motor 15kW, Fanuc OI control, 30-station ATC, coolant, manuals, low-volt light, through-spindle coolant, swarf...
Machining centres
DOOSAN HP6300 Horizontal Machining Centre with 7-Station Pallet Changer (2012) DOOSAN HP6300 Horizontal Machining Centre with 7-Station Pallet Changer (2012)
Traverses X Y Z: 1,000 x 850 x 850mm, pallet size 630 x 630mm, pallet load 1,200kg, 60 ATC, CT50 spindle taper, Fanuc 31i control, 196-station ATC, spindle power 30kW, B-axis 0.001 degrees, 12,000rpm spindle, swarf conveyor,...
Machining centres
Leadwell V-40 VMC with Fanuc control, 8,000RPM spindle & Nikken  4th axis head. YOM 2006 Leadwell V-40 VMC with Fanuc control, 8,000RPM spindle & Nikken 4th axis head. YOM 2006

Machining centres
Mazak VTC 300-C Travelling Column VMC with Mazatrol PC Fusion control, 12,000RPM spindle. YOM 2004 Mazak VTC 300-C Travelling Column VMC with Mazatrol PC Fusion control, 12,000RPM spindle. YOM 2004

Machining centres
 CHIRON FZ 18L CNC Machining Center CHIRON FZ 18L CNC Machining Center
Year of production: 2006 Working travel: X: 2,600 mm Y: 520 mm Z: 630 mm Table: 3,200 x 570 mm Tool magazine: 20 units Motor on spindle:11 kW Control: CNC Heidenhain Machine weight: 7,200 kg With video
Machining centres
2008 Mazak Variaxis 730-5X II 2008 Mazak Variaxis 730-5X II
Twin Pallet 5-axis Machining Centre Mazatrol Matrix Nexus X/Y/Z Travels 730/850/560 mm A-axis -120° / +30° C-axis 360° Rapids X/Y/Z 42/42/42 m/min Rapids A/C 18000°/min Number of pallets 2 Pallet size 500 x 500 mm Max workpiece size (DxH)...
Machining centres
2007 Mazak HCN 5000 II 2007 Mazak HCN 5000 II
Horizontal Machining Centre Mazatrol Matrix Nexus X/Y/Z 730/730/740 mm B-axis 1° Rapids X/Y/Z 50/50/50 m/min Number of pallets 2 Pallet size 500 x 500 mm Max workpiece ø 800 mm Max workpiece height 1000 mm Max workpiece weight 500...
Machining centres
2011 Mazak HCN 5000 II 2011 Mazak HCN 5000 II
Horizontal Machining Centre Mazatrol Matrix Nexus X/Y/Z 730/730/740 mm B-axis 1° Rapids X/Y/Z 50/50/50 m/min Number of pallets 2 Pallet size 500 x 500 mm Max workpiece ø 800 mm Max workpiece height 1000 mm Spindle speeds ~ 12000...
Machining centres
2015 Mazak VTC 820/30 2015 Mazak VTC 820/30
Vertical Machining Centre Mazatrol Matrix Nexus 2 Table size 3500 x 820 mm X/Y/Z Travels 3000/820/720 mm Spindle speeds ~ 12000 rpm Rapids X/Y/Z 50/50/50 m/min ATC 30 MAS BT-40 Through spindle coolant 15 bar Dual Kitagawa MR250 NC rotary...
Machining centres
Machining center Cincinnati Milacron 20-HC-2500 Machining center Cincinnati Milacron 20-HC-2500
Control CNC Siemens Sinumerik 840D - Travel in axes: * X = 2500 mm- horizontal linear axis * Y = 950 mm - vertical linear axis * Z = 610 mm - horizontal linear axis * WR = work spindle * B1 = continuous control every 0.001o -...
Machining centres
SNK PC60V 5-Axis CNC Vertical Machining Centre SNK PC60V 5-Axis CNC Vertical Machining Centre
Year 2000. SNK Fanuc 18M control, number of axes 5, table size 1,580mm x 650mm, distance table end to spindle end 736mm, traverses X=1,524mm, Y=660.4mm, Z=457.2mm, spindle head tilt +/-25º, A-axis cross plane spindle carrier (+ or...
Machining centres
OKK PCV 55 Vertical Machining Centre OKK PCV 55 Vertical Machining Centre
Year 1999. Fanuc 18 MC control, table size 1,220 x 560mm, traverses (XYZ): 1,016 x 600 x 550mm, spindle speed up to 13,000rpm, spindle taper BT50, 30 ATC, tool length 350mm, tool weight 20kg, machine dimensions 3,100 x 3,100 x...
Machining centres
OKK HM 50 Horizontal Machining Centre OKK HM 50 Horizontal Machining Centre
Year 1997. Fanuc 16M control, pallet size L=500, W=500mm, traverses X=760, Y=730, Z=790mm, spindle speed up to 8,000rpm, spindle taper BT50, 80 ATC, feed rate 1-4,000mm/min, tool length 450mm, tool weight 20kg, machine dimensions 4,600 x 3,900 x...
Machining centres
MORI SEIKI MV-80 B (Extended Table) Vertical Machining Centre MORI SEIKI MV-80 B (Extended Table) Vertical Machining Centre
Year mid 90’s. Fanuc MFM5 control, table size 2,500 x 814mm, traverses (XYZ) 2,032 x 814 x 750mm, spindle speed 10-3,500rpm, spindle taper BT50, 40 ATC, distance between spindle nose and table top 200-950mm, max weight on table...
Machining centres
HARTFORD LG800 4-Axis Vertical Machining Centre HARTFORD LG800 4-Axis Vertical Machining Centre
Installed 2008. Fanuc 21i MC control, table size 950mm x 610mm, traverses (XYZ) 800mm x 510mm x 630mm, max table weight 500kg, max spindle speed 10,000rpm, spindle motor power 11.0kW / 15hp, spindle taper BT40, 24-station side-arm...
Machining centres
SNK PCV 60 5-Axis VMC SNK PCV 60 5-Axis VMC

Machining centres
MORI SEIKI MV-65 VMC MORI SEIKI MV-65 VMC

Machining centres
MIKRON HEM 500U 5-Axis Vertical Machining Centre (2013) MIKRON HEM 500U 5-Axis Vertical Machining Centre (2013)
Traverses X Y Z: 500 x 450 x 400mm, 500mm table, A-axis -65/+110 degrees, C axis, 360 degrees, table load 200kg, Heidenhain TNC530, spindle speed 12,000rpm, 22kW spindle motor, CAT40 spindle taper, 60-station ATC, swarf...
Machining centres
DOOSAN DNM400 Vertical Machining Centre (2009) DOOSAN DNM400 Vertical Machining Centre (2009)
Traverses X Y Z: 762 x 435 x 510mm, table size 920 x 435mm, BT40 spindle taper, spindle speed 12,000rpm, Fanuc Oi control, spindle motor power 15/11kW, 30-station ATC with side-arm, coolant, low-volt light, manuals. POA
Machining centres
Hardinge VMC 600 Vertical Machining Centre Hardinge VMC 600 Vertical Machining Centre
Siemens 810D CNC, BT40, speeds to 8,000rpm, 20-station toolchanger, 750 x 510mm table, X=600, Y=510, Z=510mm (20984) POA
Machining centres
Bridgeport VMC XP2 Model 610 30 Vertical Machining Centre Bridgeport VMC XP2 Model 610 30 Vertical Machining Centre
Heidenhain iTNC 530 control, 30-station ATC. Year 07/2003. Weight 3,100kg. S/no 723513
Machining centres
DMG DMU50 Ecoline (2014) DMG DMU50 Ecoline (2014)
12k spindle, ISO 40, 30-tool T/C, 3+2 machining with Siemens 840D control
Machining centres
MIKRON VCE 800W Pro (2005) MIKRON VCE 800W Pro (2005)
14k spindle, ISO 40, 24-position T/C, scales in all axes, Heidenhain 530 control.
Machining centres
Mazak VTC800HD (3347) Mazak VTC800HD (3347)
Mazak VTC800HD, 2016, s/n 273741, Mazak Matrix 2 control, table 3500 x 820mm, trav 3000 x 800 x 720mm, Renishaw RMP60 probe, BT50, High torque, 10,000rpm, Cromer full swarf, 70 bar, Absolute Mist extraction, tool setter, partition, Swarf Management,...
Machining centres
2017 Mazak VTC 530 C 2017 Mazak VTC 530 C
Vertical Machining Centre Mazatrol SmoothG Control Table centre height 750 mm Table working surface (Length) 2,300 mm Table working surface (Width) 530 mm Saddle (longitudinal) X-axis 1,740 mm Column (cross) Y-axis 530 mm Spindle head...
Machining centres
Doosan DNM650 (3196) Doosan DNM650 (3196)
Doosan DNM650, 2012, Ser No MV0011-000626, Heidenhain TNC530i, Table 1300 x 670mm, Trav 1270 x 670 x 625mm, 12000rpm, CAT40, 30atc, 15/18.5kw, Through Spindle Coolant, Swarf Conveyor , Wash Gun, Linear Guideways. Footprint 2,762 x 3,350 x 2,815mm...
Machining centres
Waldrich Coburg MultiTec 2500AP UNIVERSAL DOUBLE COLUMN Machining Center Waldrich Coburg MultiTec 2500AP UNIVERSAL DOUBLE COLUMN Machining Center
5-AXIS CNC Control Mfg. Siemens, Model Sinumerik 840D; Workpiece width 2.500 mm, height 2.250 mm, weight 25 Ton; Travels X/Y/Z/W 5.000 x 3.500 x 1.500 x 1.500 mm; with One Pallet dimension 2.250 x 4.000 mm; Milling Head drive 63kW, Speeds...
Machining centres
Waldrich Coburg MasterTec 4000 AR-MR/NC UNIVERSAL DOUBLE COLUMN Machining Center Waldrich Coburg MasterTec 4000 AR-MR/NC UNIVERSAL DOUBLE COLUMN Machining Center
5-AXIS CNC Control Mfg. Siemens, Model Sinumerik 840D; Workpiece width 4.000 mm, -height 3.500 mm, -weight 25 Ton; Travels X/Y/Z/W 5.500 x 5.000 x 1.750 x 2.500 mm; with one Pallet dimension 2.250 x 4.000 mm, Integrated Rotary Table in...
Machining centres
Chiron Chiron FZ12W High Speed Plus CNC Machining Center Chiron Chiron FZ12W High Speed Plus CNC Machining Center
Control system, make Siemens, type Sinumerik 870 D, max. spindle speed 10,500 rpm, travel X/Y/Z 550 x 320 x 420 mm, workpiece shuttle table, chip conveyor, cooling unit, make Hyfra, type TRK 70, coolant preparation system, control cabinet w. cooling...
Machining centres
MAZAK VTC 30C Vertical Machining Centre. Control Mazatrol M Plus. POA MAZAK VTC 30C Vertical Machining Centre. Control Mazatrol M Plus. POA

Machining centres
MIKRON VCE 1200 Pro Vertical Machining Centre with 4th Axis (2014) MIKRON VCE 1200 Pro Vertical Machining Centre with 4th Axis (2014)
Traverses X, Y, Z: 1,200 x 600 x 675mm, table size 1,200 x 620mm, spindle speed 10,000rpm, spindle motor 18.5kW, 24-station ATC, Heidenhain TNC 530I, Nikken 4th axis rotary table. POA
Machining centres
HAAS Super Minimill Vertical Machining Centre (2011) HAAS Super Minimill Vertical Machining Centre (2011)
Traverses X Y Z: 406 x 305 x 254mm, table 914 x 305mm, spindle taper BT40, 15hp spindle motor, spindle speed 10,000rpm, Haas control, 10-station ATC, manuals, coolant. POA
Machining centres
XYZ 800HD VMC with widescreen Siemens 828D & Shop mill XYZ 800HD VMC with widescreen Siemens 828D & Shop mill
8,000RPM, BT40 spindle. As new! YOM 2019
Machining centres
YCM FX 350A 5-Axis Machining  Centre with Heidenhain i530 control YCM FX 350A 5-Axis Machining Centre with Heidenhain i530 control
12,000RPM, thru coolant, 60-tool ATC, glass scales & probing. YOM 2012 Choice of 2
Machining centres
Hardinge Bridgeport XR 610  with Heidenhain i530 control Hardinge Bridgeport XR 610 with Heidenhain i530 control
12,000RPM direct-drive spindle, thru coolant, 4th axis probing. YOM 2007
Machining centres
Hardinge Bridgeport XR 1000 with  Heidenhain i530 control Hardinge Bridgeport XR 1000 with Heidenhain i530 control
12,000RPM direct-drive spindle, thru coolant, 4th axis probing. YOM 2010 Choice of 3
Machining centres
Hardinge Bridgeport XR 760 with  Heidenhain i530 control Hardinge Bridgeport XR 760 with Heidenhain i530 control
12,000RPM direct-drive spindle, thru coolant, 4th axis probing. YOM 2008
Machining centres
Dugard SS1263L VMC with  Heidenhain i530 control Dugard SS1263L VMC with Heidenhain i530 control
12,000RPM direct-drive spindle, thru coolant, 1,200kg sd table load. YOM 2015
Machining centres
Cincinnati Lamb CFV 800i with Heidenhain i530 control Cincinnati Lamb CFV 800i with Heidenhain i530 control
30-tool ATC, Nikken 4th axis, 12,000RPM spindle with through coolant. YOM 2008 Choice of 2
Machining centres
HAAS VF6 Vertical Machining Centre. Haas control. Year 2003. 28487 HAAS VF6 Vertical Machining Centre. Haas control. Year 2003. 28487

Machining centres
HURCO VM10i Vertical Machining Centre with WinMax Control. Year 2018. 28297 HURCO VM10i Vertical Machining Centre with WinMax Control. Year 2018. 28297

Machining centres
DOOSAN VC630/5AX Vertical Machining Centre DOOSAN VC630/5AX Vertical Machining Centre
Installed 2017. Heidenhain TNC 530i CNC, full 5-axis, BT40, 60 ATC, speeds to 12,000rpm, X=650, Y=765, Z=520mm A=150º (+30º/-120º), through-spindle coolant, swarf conveyor (20996) POA
Machining centres
XYZ 1020 VMC Vertical Machining Centre (2012) XYZ 1020 VMC Vertical Machining Centre (2012)
Traverses X/Y/Z: 1,020 x 520 x 575mm, table 1,120 x 500mm, 20hp spindle motor, Siemens 828 with Shopmill control, 8,000rpm spindle, coolant, 24-station ATC, BT40 taper, 15kW, low-volt light
Machining centres
DOOSAN DNM500 Vertical Machining Centre (2011) DOOSAN DNM500 Vertical Machining Centre (2011)
Traverses XYZ: 1020 x 510 x 520mm, table 1200 x 540mm, spindle speed 12,000rpm, spindle taper BT40, spindle motor 11kW, Fanuc Oi-MC control, 30-station ATC, low-volt light, thru spindle coolant
Machining centres
Hyundai Kia VX650/50 (3358) Hyundai Kia VX650/50 (3358)
Hyundai Kia VX650/50, 2008, s/nG3692-0149, Fanuc 21i-MB control, Travels X-1,400mm, Y-650 Z-635mm, Table 1,600 x 650mm, 50 taper spindle, BT50 taper, 6,000RPM, 24 station ATC, c/w swarf conveyor, spindle chiller, rigid tapping, machine dimension...
Machining centres
XYZ ProtoTRAK 2-OP (3382) XYZ ProtoTRAK 2-OP (3382)
XYZ ProtoTRAK 2-OP, 2017, s/n SOP02219, Prototrak 3 axis CNC Control, Table 457 x 381mm, Trav 355 x 305 x 455mm, rapids 15m/min, 6000rpm, BT30, 8atc, 3hp, 3-phase power. Footprint 775 x 1,380 x 2,520mm tall.
Machining centres
DOOSAN Mynx 6500/50 VMC with Nikken 4th Axis (2012) DOOSAN Mynx 6500/50 VMC with Nikken 4th Axis (2012)
Traverses X Y Z: 1,270 x 670 x 626mm, table 1,400 x 670mm, table load 1,300kg, spindle speed 6,000rpm, spindle taper BT50, spindle motor 15kW, Fanuc i- control, 24-station ATC, through-spindle coolant, swarf conveyor. POA
Machining centres
1997 FANUC Robodrill T14-iA 16i-M Control 1997 FANUC Robodrill T14-iA 16i-M Control

Machining centres
Cincinnati Sabre 500 (3319) Cincinnati Sabre 500 (3319)
Cincinnati Sabre 500, 1996, s/n TBA, Heidenhain 360 control, table 650 x 510mm, trav 510 x 510 x 560mm, 8,000rpm, 11kw, bt40, 21atc.
Machining centres
HURCO VM2 Vertical Machining Centre. Year 2005. POA HURCO VM2 Vertical Machining Centre. Year 2005. POA

Machining centres
HAAS VF-10 Vertical Machining Centre (2005) HAAS VF-10 Vertical Machining Centre (2005)
Traverses X Y Z: 3,048 x 806 x 762mm, table 3,048 x 711mm, spindle speed 0-7,500rpm, spindle taper BT40, spindle motor 30hp, Haas control, 24-station ATC, programmable coolant nozzle. POA
Machining centres
DOOSAN DNM500 Vertical Machining Centre (2011) DOOSAN DNM500 Vertical Machining Centre (2011)
Traverses X Y Z: 1,020 x 510 x 520mm, table 1,200 x 540mm, spindle speed 12,000rpm, spindle taper BT40, spindle motor 11kW, Fanuc Oi-MC control, 30-station ATC, low-volt light, through-spindle coolant. POA
Machining centres
Dugard 1000Y Plus VMC with  Siemens 828D & Shopmill Dugard 1000Y Plus VMC with Siemens 828D & Shopmill
10,000RPM, BBT40 spindle, 24-tool ATC with 4th axis & tailstock. YOM 2012
Machining centres
Dugard ECO 760 VMC  with Siemens 828D & Shopmill Dugard ECO 760 VMC with Siemens 828D & Shopmill
BT40 8,000RPM spindle, 24-tool ATC, swarf conveyor. YOM 2012
Machining centres
EDEL CYPORT 4020 5-Axis Machining Centre EDEL CYPORT 4020 5-Axis Machining Centre
• Heidenhain 530 control • Table 6,250 x 2,310mm • X=4,000mm (table 6,250mm) 20m/min feed • Y=2,000mm (table 2,310mm) 20m/min feed • Z=1,080mm 10m/min feed (machine 1) • Z=900mm 10m/min feed (machine 2) • C ±200° • A ±110° • Spindle...
Machining centres
DECKEL MAHO MULTI-PALLET LIGHTS-OUT PRODUCTION CENTRE DECKEL MAHO MULTI-PALLET LIGHTS-OUT PRODUCTION CENTRE
• Pallet Size 630 x 630mm – Six Pallets • 120 ATC • B-Axis 0.001 • Rapids 80m/min • Renishaw + Blum Laser • Direct Measuring System • Travels X/Y/Z 750/800/800mm • Maximum load (table centre) 800kg • Tool taper SK50 • Drive power (100%...
Machining centres
HAAS VF3 + 4th Axis HAAS VF3 + 4th Axis

Machining centres
HAAS VF5 HAAS VF5

Machining centres
DSG Monarch CNC 2413 DSG Monarch CNC 2413

Machining centres
Mazak VTC20C (3334) Mazak VTC20C (3334)
Mazak VTC20C, 1996 s/n, Mazak M-Plus Control, CAT 40, 24atc, table 2000 x 510mm, trav 1660 x 510 x 510mm, 7000rpm, 11kw
Machining centres
Leadwell V-30 CNC Vertical Machining Centre (3351) Leadwell V-30 CNC Vertical Machining Centre (3351)
Leadwell V-30 CNC Vertical Machining Centre, 2004, s/n L2TJD0556, Fanuc 0i-MB control, Travel X-760, Y-410, Z510mm, Table 890 x 400mm, 80-8000RPM, 5.5/7.5kw motor power, BT40 tooling, 24 station ATC, c/w swarf conveyor, various tool holders. With video
Machining centres
MAZAK VTC-200C-II Vertical Machining Centre with 4th Axis (2002) MAZAK VTC-200C-II Vertical Machining Centre with 4th Axis (2002)
Table size 2,000 x 510mm, traverses X Y Z: 1,660 x 510 x 510mm, table load 1,200kg, spindle taper SK40, spindle speed 12,000rpm, 30 ATC, Mazatrol 640M control, coolant, swarf conveyor, 4th axis rotary table. POA
Machining centres
MAZAK VTC-820/30 Vertical Machining Centre with 4th Axis (2011) MAZAK VTC-820/30 Vertical Machining Centre with 4th Axis (2011)
Table size 3,500 x 820mm, traverses X Y Z: 3,000 x 820 x 720mm, spindle to table min/max 140-860mm, 22kW spindle power, spindle speed 12,000rpm, spindle taper DIN40, 30-station ATC, Mazatrol Matrix Nexus II control, swarf conveyor,...
Machining centres
MAZAK Nexus 510C-II Vertical Machining Centre (2008) MAZAK Nexus 510C-II Vertical Machining Centre (2008)
Traverses X Y Z: 1,050 x 508 x 508mm, table 1,298 x 548mm, table load 1,202kg, spindle speed 12,000rpm, spindle taper DIN40, spindle motor 18kW, Mazatrol Matrix control, 30-station ATC, low-volt light, swarf conveyor,...
Machining centres
HAAS VF-6 Vertical Machining Centre (2007) HAAS VF-6 Vertical Machining Centre (2007)
Traverses X Y Z: 1,626 x 813 x 762mm, table 1,626 x 711mm, spindle speed 0-7,500rpm, spindle motor 20hp, Haas control, 24-station side-arm ATC, programmable coolant nozzle, low-volt light, swarf auger, manuals, through-spindle...
Machining centres
DUGARD 1000Y Plus Vertical Machining Centre DUGARD 1000Y Plus Vertical Machining Centre
Table size 1,200 x 600mm, table load 500kg, traverses X Y Z: 1,020 x 610 x 510mm, spindle to table min/max 130-640mm, spindle speed 10,000rpm, spindle taper BT40 Big Plus, 24-station ATC, 4th axis rotary table, swarf conveyor. POA
Machining centres
DOOSAN DNM 5700 Vertical Machining Centre (2016) DOOSAN DNM 5700 Vertical Machining Centre (2016)
Traverses X Y Z: 1,050 x 570 x 510mm, table size 1,300 x 570mm, min/max height spindle to table 150-660mm, spindle speed 12,000rpm, spindle taper BT40, spindle power 18.5kW, Fanuc I series control, swarf conveyor. POA
Machining centres
XYZ 1020 VMC with Siemens 828D  control & Shopmill, 8,000RPM, BT40 spindle, 24-tool side-mount ATC. YOM 2012 XYZ 1020 VMC with Siemens 828D control & Shopmill, 8,000RPM, BT40 spindle, 24-tool side-mount ATC. YOM 2012

Machining centres
Haas VF4 VMC with 8,000RPM spindle, 1,270mm X-axis movement. Haas VF4 VMC with 8,000RPM spindle, 1,270mm X-axis movement.
Supplied by us previously. In great condition! YOM 1998
Machining centres
Dugard VMC 1000 with Fanuc control, 8,000RPM, BT40 spindle, 22-tool ATC. YOM 2000 Dugard VMC 1000 with Fanuc control, 8,000RPM, BT40 spindle, 22-tool ATC. YOM 2000

Machining centres
HURCO VMX50m Vertical Machining Centre with MAX Control. Year 2012 HURCO VMX50m Vertical Machining Centre with MAX Control. Year 2012

Machining centres
XYZ 1010 Vertical Machining Centre with Siemens Sinumerik 810D Control. 28788 XYZ 1010 Vertical Machining Centre with Siemens Sinumerik 810D Control. 28788
Interfaced 4 & 5 axis trunnion attachment. Year 2008
Machining centres
CNC Vertical Machining Centre HARDINGE BRIDGEPORT GX1600 CNC Vertical Machining Centre HARDINGE BRIDGEPORT GX1600
Working travel: 1,600 x 700 x 635mm tool magazine: 30 pcs Year of production: 2013
Machining centres
Vertical Centre MORI SEIKI SV500 Vertical Centre MORI SEIKI SV500
4th axis, Fanuc, 10,000rpm
Machining centres
CNC 5-Axis JOBS Jomach 131 Siemens 840D CNC 5-Axis JOBS Jomach 131 Siemens 840D
Travels 2,500 x 1,200 x 900mm, 20 ATC
Machining centres
BERGONZI SYNTHESIS LC 1000 Vertical Machining Centre BERGONZI SYNTHESIS LC 1000 Vertical Machining Centre
Reference: CUV019 Model LC 1000 Serial number LC/130/98 YOM 1999 Machine equipped with : CNC BOSCH Weight of the machine (T) 4
Machining centres
BRIDGEPORT VMC 600/22 Digital BRIDGEPORT VMC 600/22 Digital
Heidenhain TNC410 control, travels 600 x 420 x 520mm, table 840 x 420mm, 22 ATC, spindle speeds 6,000rpm, BT40.
Machining centres
MIKRON VCE 800 PRO Vertical Machining Centre (2009) MIKRON VCE 800 PRO Vertical Machining Centre (2009)
Traverses X Y Z: 800 x 500 x 540mm, table size 910 x 500mm, table load 1,100kg, spindle speed 10,000rpm, spindle taper BT40, rapid feedrate 40m/min, 24-station ATC, Heidenhain TNC 530I. POA
Machining centres
HAAS Super MiniMill Vertical Machining Centre (2005) HAAS Super MiniMill Vertical Machining Centre (2005)
Traverses X Y Z: 406 x 305 x 254mm, table 914 x 305mm, spindle taper BT40, 20hp spindle motor, spindle speed 10,000rpm, Haas control, 10-station ATC, manuals, coolant. POA
Machining centres
FEELER FVP-1000A Vertical Machining Centre with 4th Axis (2009) FEELER FVP-1000A Vertical Machining Centre with 4th Axis (2009)
Table size 1,150 x 475mm, traverses X Y Z: 1,020 x 500 x 505mm, spindle speed 10,000rpm, spindle taper BT40, 22-station ATC, spindle power 7.5/11kW, Fanuc OI-MC control, swarf conveyor, 4th axis unit. POA
Machining centres
DAHLIH DCM-4225 Vertical Machining Centre (2016) DAHLIH DCM-4225 Vertical Machining Centre (2016)
Traverses X Y Z: 4,200 x 2,500 x 800mm, table size 4,000 x 2,000mm, distance between frames 2,540mm, workpiece weight 12,000kg, min/max height under spindle 200-1,000mm, spindle speed 6,000rpm, spindle power 18.5kW, spindle taper BT50,...
Machining centres
MAZAK VTC 300C II Vertical Machining Centre MAZAK VTC 300C II Vertical Machining Centre
New 2002. PC Fusion 640M CNC, BT40, speeds to 12,000rpm, swarf conv., handwheel, 2,000 x 760mm table, X=1,760, Y=760, Z=660mm (20954) POA
Machining centres
Hardinge Bridgeport XV 710 with Siemens 810D control & Shopmill, 8,000RPM BT40 spindle Hardinge Bridgeport XV 710 with Siemens 810D control & Shopmill, 8,000RPM BT40 spindle
Immaculate! YOM 2007
Machining centres
Matchmaker VMC1100 Vertical Machining Centre with Fanuc 0i-MC Control. Year 2007 Matchmaker VMC1100 Vertical Machining Centre with Fanuc 0i-MC Control. Year 2007

Machining centres
Dahlih Dahlih
Fanuc 0i-MD BT 50 spindle taper Max spindle speed 5000 RPM Geared head Table Size 1300 mm x 660mm X – Axis Travel 1020mm Y – Axis Travel 550mm Z – Axis Travel 560mm Nikken CNC260 4th axis 20 station ATC Thru spindle coolant Coolant pump...
Machining centres
MAZAK Integrex 70 YB x 4,000mm CNC Lathe. Y & B axis, Mazatrol PC Fusion 640 control. POA MAZAK Integrex 70 YB x 4,000mm CNC Lathe. Y & B axis, Mazatrol PC Fusion 640 control. POA

Machining centres
Bridgeport 800/22 Digital Vertical Machining  Centre Bridgeport 800/22 Digital Vertical Machining Centre
Heidenhain TNC426, BT40, speeds to 8,000rpm, 22-station toolchanger, 1,000 x 490mm table, X=800, Y=510, Z=510mm (20982) POA
Machining centres
Hardinge Bridgeport XP3-760 Vertical Machining Centre Hardinge Bridgeport XP3-760 Vertical Machining Centre
Heidenhain TNC530i CNC, swarf conveyor, BT40, speeds to 12,000rpm, 30 ATC, 900 x 600mm table, X=760, Y=610, Z=610mm (20983) POA
Machining centres
XYZ VMC 710 with Siemens 828D control XYZ VMC 710 with Siemens 828D control
24-tool side-mount ATC, 8,000RPM. Choice of 2 2010 & 2014
Machining centres
VMC HURCO, BMC 4020, 2000, Ultimax 4 control VMC HURCO, BMC 4020, 2000, Ultimax 4 control

Machining centres
HARDINGE BRIDGEPORT GX1600 CNC Vertical Machining Centre HARDINGE BRIDGEPORT GX1600 CNC Vertical Machining Centre
Working travel: 1,600 x 700 x 635mm tool magazine: 30 pcs Year of production: 2013
Machining centres
DECKEL MAHO DMC 60 S CNC Vertical Machining Centre. 6-sided machining, bar feed DECKEL MAHO DMC 60 S CNC Vertical Machining Centre. 6-sided machining, bar feed
Working travel: X=760mm, Y=460mm, Z=560mm, A axis, B axis, range of spindle speeds: 14,000rpm, tool magazine 60 pcs, tool holder HSK A63, overall power demand 58kVA Control: CNC Siemens 840 D Powerline Year of production: 2003
Machining centres
MAZAK V655/60 with 4th Axis MAZAK V655/60 with 4th Axis

Machining centres
2004 FANUC Robodrill T21 2004 FANUC Robodrill T21

Machining centres
2008 DMG 50 EVO Linear 2008 DMG 50 EVO Linear
Ex govt. Minimal use. Superb condition. Arriving soon
Machining centres
Parpas 90HP/2000 CNC Ram Style Machining Centre (3291) Parpas 90HP/2000 CNC Ram Style Machining Centre (3291)
Parpas 90HP/2000 CNC Ram Style Machining Centre, rebuilt 2020, Unused since rebuild, Siemens 840DsI control, Travel X 2,055, Y1,026, Z1,245mm, B axis travel 370 degrees, 185 degree/-185 degree, Spindle speed 8,000rpm, 30KW motor power
Machining centres
HAAS VF-6 Vertical Machining Centre (2009) HAAS VF-6 Vertical Machining Centre (2009)
Traverses X Y Z: 1,626 x 813 x 762mm, table 1,626 x 711mm, spindle speed 0-7,500rpm, spindle motor 20hp, Haas control, 40-station side-arm ATC, programmable coolant nozzle, low-volt light, swarf auger, manuals, through-spindle...
Machining centres
HAAS Super MiniMill 2 Vertical Machining Centre (2011) HAAS Super MiniMill 2 Vertical Machining Centre (2011)
Traverses X Y Z: 508 x 406 x 356mm, table 1,016 x 353mm, spindle taper BT40, 20hp spindle motor, spindle speed 10,000rpm, Haas control, 24-station ATC, manuals, coolant. POA
Machining centres
HAAS EC-1600-4X Horizontal Machining Centre with 4th Axis (2007) HAAS EC-1600-4X Horizontal Machining Centre with 4th Axis (2007)
Table size 1,626 x 914mm, traverses 1,626 x 1,016 x 813mm, table load 4,563kg, spindle power 30hp, spindle speed 6,000rpm, spindle taper BT50, 30-station ATC, Haas control, swarf auger and through-spindle coolant. POA
Machining centres
DOOSAN DNM 500 Vertical Machining Centre DOOSAN DNM 500 Vertical Machining Centre
New 2012. Fanuc I Series CNC, BT40, speeds to 12,000rpm, 1,200 x 540mm table, swarf conveyor, X=1,020, Y=540, Z=510mm (20992) POA
Machining centres
DOOSAN DNM 400 Vertical Machining Centre. DOOSAN DNM 400 Vertical Machining Centre.
New 2012. Fanuc I Series CNC, BT40, speeds to 12,000rpm, 920 x 435mm, X=762, Y=435, Z=510mm, 30 ATC, swarf conveyor (20991) POA
Machining centres
MAZAK VTC 300C II Vertical Machining Centre MAZAK VTC 300C II Vertical Machining Centre
New 2015. Mazatrol PC Fusion 640M, speeds to 12,000rpm, BT40, 2,000 x 760mm table, X=1,740, Y=760, Z=660mm capacity (20951) POA
Machining centres
Hurco VM1 with WinMax control Hurco VM1 with WinMax control
10,000RPM spindle, 20-tool side-mount ATC, DFX file reader. YOM 2008
Machining centres
MAZAK FJV 60/120 Gantry Vertical Machining Centre MAZAK FJV 60/120 Gantry Vertical Machining Centre
Matrix control, table size 4,000 x 1,260mm, between columns 1,500mm, 18,000rpm, spindle CAT40, 30ATC £267,500
Machining centres
DMG DMC70H DuoBlock Horizontal Machining Centre (9783) DMG DMC70H DuoBlock Horizontal Machining Centre (9783)
DMG DMC70H DuoBlock Horizontal Machining Centre, C/W 6 Pallet APC, 2008, s/n TBA, Siemens 840D Control, 630 x 630 pallet, 6 station pallet changer, Travels X750, Y800, Z800mm, B0.001 degree, 120 station ATC, Spindle taper SK50, 20/30kw spindle...
Machining centres
2014 Mazak FJV 60/160 II 2014 Mazak FJV 60/160 II
Vertical Machining Centre Mazatrol Matrix Nexus 2 Travels X/Y/Z 4200 x 1400 x 720 mm Table size 4000 x 1260 mm Distance between columns 1500 mm Spindle to table min/max 160-820 mm Max table load 5000 kg Rapids X/Y/Z 22/40/30 m/min Spindle...
Machining centres
DOOSAN VC630/5AX Machining Centre DOOSAN VC630/5AX Machining Centre
New 2011. Heidenhain TNC-530i CNC, full 5-axis, BT40, 630mm diameter table, X=650, Y=765, Z=520mm, A=150 (+30/-120 degrees) (20993) POA
Machining centres
DOOSAN DNM 400 Vertical Machining Centre DOOSAN DNM 400 Vertical Machining Centre
New 2012. Fanuc I Series CNC, BT40, speeds to 12,000rpm, 920 x 435mm, X=762, Y=435, Z=510mm, 30 ATC, swarf conveyor (20995) POA
Machining centres
QUASER MV154E Vertical Machining Centre QUASER MV154E Vertical Machining Centre
New 2010. 900 x 500mm table, speeds to 12,000rpm, swarf conveyor, X=762, Y=530, Z=560mm, BT40, Heidenhain CNC (20986) POA
Machining centres
Hardinge VMC 800 Sr II with Fanuc 0i control Hardinge VMC 800 Sr II with Fanuc 0i control
8,000RPM, 20-tool ATC. YOM 2003
Machining centres
Hardinge VMC 600 Sr II with Siemens 810D control & Shopmill Hardinge VMC 600 Sr II with Siemens 810D control & Shopmill
Fitted with Troyke 4th axis head. YOM 2001
Machining centres
Hardinge Bridgeport GX 600 with Heidenhain i530 control Hardinge Bridgeport GX 600 with Heidenhain i530 control
8,000RPM, 20-tool ATC. Immaculate! YOM 2007
Machining centres
MAZAK VTC-800/30SR 5X Vertical Machining Centre. MAZAK VTC-800/30SR 5X Vertical Machining Centre.
Matrix control, table 3,500 x 820mm, X Y Z: 3,000 x 800 x 720mm, 18,000rpm, 48 ATC, through-spindle coolant, 35kW main spindle. £112,000
Machining centres
VMC MAZAK, MTV 655/60, 1996, Mazatrol M Plus VMC MAZAK, MTV 655/60, 1996, Mazatrol M Plus

Machining centres
VMC HAAS, VF 4 BHE, 2002, Haas control VMC HAAS, VF 4 BHE, 2002, Haas control

Machining centres
HURCO VM 30 CNC Vertical Machining Centre HURCO VM 30 CNC Vertical Machining Centre
Working travel: X: 1,270mm, Y: 508mm, Z: 508mm, table: 1,320 x 457mm, spindle speed range: 8,000rpm, tool magazine: 20 pcs, tool holder: ISO 40, power demand: 15kVA Control: Hurco MAX Year of production: 2003
Machining centres
Dahlih DL-MCH630 Horizontal Twin Pallet Machining Centre (2011) Dahlih DL-MCH630 Horizontal Twin Pallet Machining Centre (2011)
Dahlih DL-MCH630 Horizontal Twin Pallet Machining Centre (2011) Pallet Size 630 x 630mm Fanuc Oi-MD Control, Renishaw Probe, 60 ATC, Full B Axis, Swarf Conveyor, Spindle Chiller. Machine Data: S/No. 3003020039 Year 2011 Model DL –...
Machining centres
HAAS VF-3+4th Axis HAAS VF-3+4th Axis
Please call 07725318448 or email for further details Haas VF3 S.n 33935 22kw spindle motor Bt 40 spindle taper Table Size 1219 mm x 457mm X – Axis Travel 1060mm Y – Axis Travel 508mm Z – Axis Travel 635mm 4th axis 20 station...
Machining centres
Bridgeport VMC 600 XP with Heidenhain i530 control Bridgeport VMC 600 XP with Heidenhain i530 control
8,000RPM, BT40 spindle, 22-tool ATC, swarf conveyor. YOM 2003
Machining centres
Bridgeport VMC 500 XP with Heidenhain TNC 426-PB control Bridgeport VMC 500 XP with Heidenhain TNC 426-PB control
10,000RPM spindle, 16-tool ATC. YOM 2004
Machining centres
Bridgeport VMC 1000 XP with Heidenhain TNC 426-PB control Bridgeport VMC 1000 XP with Heidenhain TNC 426-PB control
12,000RPM spindle, 22-tool side-mount ATC. YOM 2001
Machining centres
XYZ 1020 VMC with Siemens 828D control & Shop mill XYZ 1020 VMC with Siemens 828D control & Shop mill
Supplied with 4th axis head, side-mount ATC & swarf conveyor. YOM 2013. Immaculate! Choice of 2
Machining centres
XYZ VMC 1010 Machining Centre XYZ VMC 1010 Machining Centre
XYZ VMC 1010 with Siemens 810D control with Shopmill, 8,000rpm spindle, side-mounted 24 tool rapid ATC, blockways, TS27R Renishaw tool setting probe. YOM 2006
Machining centres
HAAS VF0E Machining Centre HAAS VF0E Machining Centre
20HP motor, 7,000rpm, programmable coolant nozzle, 20 tool ATC. YOM 1998. £9,000 + VAT
Machining centres
MATCHMAKER 860 HS VMC MATCHMAKER 860 HS VMC
An immaculate and late Matchmaker 860 HS VMC with 4th axis unit, Fanuc control, rapid side mounted automatic tool changer. YOM 2012. Specification: Table Size: 910 x 560mm Taper: BT40 Spindle Speed: 8,000 RPM ATC: Arm Type 24...
Machining centres
BRIDGEPORT VMC 800X BRIDGEPORT VMC 800X
with Fanuc control, 10,000rpm spindle with thru. coolant, side-mounted rapid ATC. Immaculate! YOM 2003.
Machining centres
BRIDGEPORT VMC 1000/30 BRIDGEPORT VMC 1000/30
One owner ex-aerospace sub contractor Bridgeport VMC 1000-30 with Heidenhain TNC 426 BP control, 10,000rpm, 30 tool side mounted rapid arm type tool changer, with swarf conveyer and Filtermist unit. Runs very well! Specification: Traverses:...
Machining centres
MAZAK VTC 30-C Travelling Column VMC MAZAK VTC 30-C Travelling Column VMC
with Mazatrol control, full table or pendulum option, twin tool changer, 8,000rpm spindle, 2,000mm x 760mm table, 1,650mm x 760mm travels, YOM 1997.
Machining centres
Cincinnati Sabre 750 with Heidenhain Cincinnati Sabre 750 with Heidenhain
415 colour screen control, 7,000rpm, 21 Tool ATC. YOM 1997, £9,000 + VAT
Machining centres
Cincinnati Arrow 500 with CT control Cincinnati Arrow 500 with CT control
21 tool ATC, 6,000rpm, very well kept! 1996, £6,000 + VAT
Machining centres
CINCINNATI Arrow 500 CNC Machining Centre CINCINNATI Arrow 500 CNC Machining Centre
With Acramatic A2100 control, 21 tool ATC, 6,000rpm, nice clean machine. 1997. £8,000 + VAT
Machining centres
Mazak Super Quick Turn 10MS Machining Centre Mazak Super Quick Turn 10MS Machining Centre
With Mazatrol T Plus control, driven tools, C-Axis on both spindles, tool probe, Iemca bar feed, swarf conveyor, parts catcher, extensive tool holder & driven tool holder package, collet chuck and power chucks. YOM 1998.
Machining centres
LEADWELL V30i Vertical Machining Centre LEADWELL V30i Vertical Machining Centre
with Fanuc control, 4th axis drive and preparation, 8,000rpm, BT40
Machining centres
HURCO VM1 Vertical Machining Centre HURCO VM1 Vertical Machining Centre
with UltiMax Version 2 control, 20-tool rapid ATC. YOM 2003
Machining centres
BROTHER TC 312 Twin Pallet Drill Tap Centre BROTHER TC 312 Twin Pallet Drill Tap Centre
2 x 400mm x 220mm tables, 30m/min rapids, 10 tool, BT30, 10,000rpm. YOM 1995.
Machining centres
LEADWELL V30i Vertical Machining Centre LEADWELL V30i Vertical Machining Centre
760mm X Axis, withFanuc control fitted with Haas 4th axis indexer, tailstock and control, 8,000rpm, through coolant swarf conveyor. YOM 2008
Machining centres
Leadwell V20i VMC with Fanuc control. Leadwell V20i VMC with Fanuc control.
16 tool side mount rapid tool changer, swarf auger & tooling. Ex College only 64 minutes of run time on the clock!! As New YOM 2010
Machining centres
Doosan Puma 230MB with Fanuc control Doosan Puma 230MB with Fanuc control
driven tools & C-Axis, tool holder package, tailstock, swarf conveyer, parts catcher. YOM 2002
Machining centres
Mazak Smart 530C Vertical Machining Centre Mazak Smart 530C Vertical Machining Centre
Mazatrol Smart control, 12,000rpm, 1,300mm x 550mm table, 1,050mm x 530 x 510 travels, 30 tool rapid ATC. Immaculate! Choice of 2! YOM 2012 & 2013
Machining centres
Mori Seiki NL 2500-M with MSX8500 (Fanuc) Control Mori Seiki NL 2500-M with MSX8500 (Fanuc) Control
C-Axis, driven tooling, tailstock, swarf conveyor, bar feed, 3 jaw & collet chucks Immaculate! YOM 2006
Machining centres
Mazak VTC 200C-ii Vertical Machining Centre Mazak VTC 200C-ii Vertical Machining Centre
with Mazatrol 640M control, 10,000rpm, 24 tool travelin column VMC with probing and swarf conveyor. YOM 2006
Machining centres
Cincinnati Lamb CFV 1050i Cincinnati Lamb CFV 1050i
with Heidenhain TNC i530 control, 24 tool ATC, 10,000rpm spindle, swarf conveyor, tooling package YOM 2007
Machining centres
Hwacheon Hi Tech 200-B MC Hwacheon Hi Tech 200-B MC
With Fanuc control, 10” chuck, driven tools, C -Axis, tailstock, servo bar feed. Immaculate! YOM 12/2011
Machining centres
Bridgeport VMC 800-22 Digital Bridgeport VMC 800-22 Digital
with Heidenhain control, 22 Tool ATC YOM 2000
Machining centres
Cincinnati Dart MC-500 Cincinnati Dart MC-500
with Fanuc control, 21-tool ATC, table mount 4th indexer, Renishaw TS 27R tool probe. YOM 1999
Machining centres
XYZ 2-OP Mobile 2nd Operation VMC XYZ 2-OP Mobile 2nd Operation VMC
with ProtoTrak TMX control, 3-axis CNC & DRO. As new! YOM 2016
Machining centres
Cincinnati Arrow-2 1000 VMC Cincinnati Arrow-2 1000 VMC
with Fanuc 18i-MC control, 8,000 RPM spindle 21 tool ATC. YOM 2006
Machining centres
XYZ 1010 VMC with Siemens 810D control & Shopmill XYZ 1010 VMC with Siemens 810D control & Shopmill
side mounted 24 tool ATC 8,000RPM YOM 2008
Machining centres
XYZ 710 VMC with Siemens 810D control & Shopmill XYZ 710 VMC with Siemens 810D control & Shopmill
side mounted 24 tool ATC 8,000RPM Renishaw tool & part probe YOM 2009
Machining centres
Hurco BMC 30 Hurco BMC 30
Table 1125mm x 500mm. Approx Traverses X = 760mm Y = 450mm Z = 610mm. ATC Capacity 24 Tools. Spindle Nose 40
Machining centres
Hardinge Bridgeport 650BP VMC Hardinge Bridgeport 650BP VMC
with Siemens 810d & Shopmill, 4th axis ready, Thru coolant, swarf conveyor, Renishaw parts & tool probe YOM 2006
Machining centres
Haas VF2 VMC Haas VF2 VMC
with 760mm X Axis travel, 20 Tool ATC, uprated 10,000 RPM BT40, swarf auger, 4th axis drive Renishaw infrared detector. YOM 1999
Machining centres
YCM MV66A YCM MV66A
with Fanuc 18i control, gearbox, high pressure thru coolant, 8,000 RPM YOM 2006
Machining centres
Sieg H250 Mini VMC with Fanuc style control Sieg H250 Mini VMC with Fanuc style control
12,000 RPM, BT 30 spindle with 4th axis drive & head. YOM 2012
Machining centres
Haas VF2-SS with 15” Colour Display. Haas VF2-SS with 15” Colour Display.
12,000RPM direct drive 30HP spindle, 24-tool side-mount ATC, 4th axis drive card, extended filter for TSC, swarf auger. Less than 500 hours!! YOM 2014
Machining centres
Nakamura Tome TW10 Nakamura Tome TW10
Fanuc controlled, twin spindle, twin turret, 2x C axis driven tools, bar feed, swarf conveyor. YOM 1998
Machining centres
Haas Mikron VF3 VCE 1000 Haas Mikron VF3 VCE 1000
with Haas control, 20-tool ATC, swarf auger & 4th axis head.
Machining centres
Bridgeport VMC 760 22 Bridgeport VMC 760 22
With 4th axis drive and table, Fanjuc control. YOM 1996
Machining centres
Hardinge Bridgeport GX 480 Hardinge Bridgeport GX 480
Fanuc Control, 10,000rpm BT 40 Spindle, 16 tool ATC YOM 2006
Machining centres
Hurco VMX 50i with WinMax control & DFX file reader Hurco VMX 50i with WinMax control & DFX file reader
1,270mm x 660mm table travels, 12,000RPM BT40 spindle with thru coolant & swarf conveyor. 1st installed 2015 & not used!! As new!!
Machining centres
Hardinge SR200M Hardinge SR200M
Hardinge SR200 - M FANUC 21iT Chuck Size: 200mm Maximum Cutting Length: 510mm Rapid Feedrates: X x Z: 28 x 38m/minute Spindle Motor Power: 26kW Max Torque 356 Nm Base speed 575 RPM Spindle Nose: A2-6 Spindle Speed: 45 ~ 4500rpm Swing:...
Machining centres
Bridgeport VMC 500 XP Bridgeport VMC 500 XP
Used 2001 Bridgeport VMC 500 XP in good condition with Heidenhain TNC426 control. Ready for a powered demonstration at our Bristol showroom.
Machining centres
HURCO VM2 Vertical Machining Centre with Nikken 4th Axis (2006) HURCO VM2 Vertical Machining Centre with Nikken 4th Axis (2006)
Traverses X Y Z: 1,016 x 457 x 457mm, table size 1,168mm x 457mm, 6,000rpm spindle, 16-station ATC, CAT40 spindle taper, Hurco MAX control, 20hp spindle motor, coolant. POA
Machining centres
XYZ 2-OP (Year 2015) XYZ 2-OP (Year 2015)
Traverses X Y Z: 355 x 305 x 455mm, table 457 x 381mm, spindle speed 50-6,000rpm, spindle taper BT30, spindle motor 3hp, ProtoTrak TMX control, 8-station ATC, coolant, low-volt light. POA
Machining centres
MAZAK FH 6800 MAZAK FH 6800
Price on request. Table size 630 x 630 mm. Number of pallets 2. Technical data: Movement X-Axis: 1050 mm Y-Axis: 800 mm Z-Axis: 880 mm Table index: 1° Number of tools in magazine: 80 pieces Maximum spindle speed: 35-7.000...
Machining centres
MORI SEIKI NV 7000/50 MORI SEIKI NV 7000/50
Control MSX-504 MAPPS - IV Technical data: Movements: X-axis: 1540 mm Y axis: 760 mm Z axis: 660 mm Rapid traverse: 30 m/min Revolutions: 12000 ump/min Spindle: BT 50 Number of toolholders: 60 tools Measuring probe Oil cooling of...
Machining centres
MAZAK VARIAX 630 – 5X – 2 P MAZAK VARIAX 630 – 5X – 2 P
Control: Mazatrol Matrix Technical data: X-axis travel: 630 mm Y-axis travel: 765 mm Z-axis travel: 510 mm Main spindle revolutions 12000 ump/min Main spindle motor 22/15 KW Max. torque 172 NM Spindle: SK 40 Spindle diameter: 80...
Machining centres
DAHLIH MCV 2600 DAHLIH MCV 2600
Complete with tool changer and Fanuc CNC control. Technical data: Table Size: 2300 x 800 mm T track: 22 x 5 mm Maximum Workpiece Size: 3000 kg Traverses: X: 2600 mm Y: 870 mm Z: 760 mm Distance from spindle to table: 850 mm Spindle...
Machining centres
BRIDGEPORT VMC 600 XP Vertical Machining Centre. Year 2000. Heidenhain TNC 410. POA BRIDGEPORT VMC 600 XP Vertical Machining Centre. Year 2000. Heidenhain TNC 410. POA

Machining centres
HITACHI SEIKI VK55 ii Vertical Machining Centre ‘X’ axis 1,000mm, with 4th axis. POA HITACHI SEIKI VK55 ii Vertical Machining Centre ‘X’ axis 1,000mm, with 4th axis. POA

Machining centres
2004 Mazak Integrex 400 III ST 2004 Mazak Integrex 400 III ST
Multi-Tasking CNC Turn-Mill Centre Mazatrol PC Fusion 640 MT Pro Max turning ø 760 mm Max turning length 1524 mm Travels X1/X2/Y/Z1/Z2 630/230/230/1585/1530 mm Rapid traverse X/Y/Z 38000/26000/38000 mm/min Main spindle SMW chuck ø 400 mm...
Machining centres
DMG 70H Multi 6 Pallet Horizontal Machining Centre DMG 70H Multi 6 Pallet Horizontal Machining Centre
• Siemens 840D control • Pallet size 630 x 630mm • Full B-axis (0.001º) • Travels X, Y, Z – 750, 800, 800mm • ATC 120 positions • Spindle speed 10,000rpm • Spindle taper SK50 • Swarf management system • Renishaw OMP60 • Blum laser
Machining centres
Horizontal Centre MORI SEIKI NH 8000 Fanuc, twin pallets 800 x 800mm Horizontal Centre MORI SEIKI NH 8000 Fanuc, twin pallets 800 x 800mm

Machining centres
DMG DMU 80. Year 2001. Heidenhain DMG DMU 80. Year 2001. Heidenhain

Machining centres
XYZ Mini Mill 560 C/w Siemens control XYZ Mini Mill 560 C/w Siemens control

Machining centres
MATEC 30HVS 7-Axis Machining Centre / Turning Milling MATEC 30HVS 7-Axis Machining Centre / Turning Milling
Year 12/2008 Bosch Rexroth 7-axis control Travels X: 3,000, Y: 600, Z: 800 (horizontal), Z: 700mm (vertical) Rapids in X/Y/Z: 48m/min 1-axis NC swivel head, +/-105º Direct measuring system +/-3 arcseconds Either continuously or adjustable...
Machining centres
HAAS UMC-750 Vertical Machining Centre. HAAS UMC-750 Vertical Machining Centre.
Full 5-axis. New 2019. 90hrs, Haas CNC, 500mm dia table, 12,000rpm, probing, X=762, Y=508, Z=508mm, C=350°, B=+110° to -35° (20925) POA
Machining centres
HAAS VF2 Vertical Machining Centre HAAS VF2 Vertical Machining Centre
New 2018. HRT210 4th axis, high-speed machining option, speeds to 8,100rpm, 914 x 356mm table, X=762, Y=356, Z=508mm (20928) POA
Machining centres
HAAS Super Mini Mill Vertical Machining Centre HAAS Super Mini Mill Vertical Machining Centre
New 2018. Wireless probing, Haas CNC, BT40, speeds to 10,000rpm, 10 ATC, 730 x 305 table, X=406, Y=305, Z=254mm (20926) POA
Machining centres
HAAS Super Mini Mill Vertical Machining Centre. HAAS Super Mini Mill Vertical Machining Centre.
New 2018. Wireless probing, Haas CNC, BT40, speeds to 10,000rpm, 10 ATC, 730 x 305 table, X=406, Y=305, Z=254mm (20927) POA
Machining centres
HAAS VF3 Vertical Machining Centre HAAS VF3 Vertical Machining Centre
Haas CNC, BT40, speeds to 8,100rpm, 20-station toolchanger, 1,219 x 457mm table, X=1,016, Y=508, Z=635mm capacity (20948) POA
Machining centres
HAAS Super Mini Mill 2 Vertical Machining Centre HAAS Super Mini Mill 2 Vertical Machining Centre
Haas CNC, speeds to 10,000rpm, 24-station toolchanger, BT40, 1,016 x 353mm table, X=508, Y=406, Z=356mm capacity (20947) POA
Machining centres
MIKRON HEM 500U / WPT1 5-Axis Machining Centre MIKRON HEM 500U / WPT1 5-Axis Machining Centre
New 2017. Heidenhain TNC 530, speeds to 20,000rpm, HSK40, X=500, Y=450, Z=400, C=360°, B=-65º to +110º, 20-station pallet changer (20896) POA
Machining centres
HURON VX12 Vertical Machining Centre HURON VX12 Vertical Machining Centre
As new. New 2012. Siemens 828 CNC, handwheel, through-spindle coolant, 1,400 x 630mm table, X=1,220, Y=600, Z=610mm (20819) POA
Machining centres
Okuma MV55 VB Vertical Machining Centre. Okuma MV55 VB Vertical Machining Centre.
Ex Rolls Royce. Excellent condition. 1,300 x 560mm table, BT50, 32 ATC, speeds to 6,000rpm, X=1,050, Y=560, Z=460mm capacity (20826) POA
Machining centres
MAZAK Integrex e800V II. 5-Axis Multitasking Machining Centre MAZAK Integrex e800V II. 5-Axis Multitasking Machining Centre
Mazatrol Matrix control, max cut dia 730mm, twin pallets, turning speed 35-1,000rpm, spindle 12,000rpm, ATC80, max weight table 680kg. £180,000
Machining centres
Dahlih MCV-1020BA Vertical Machining Centre with Fanuc 0i-MD Control. Year 2014 Dahlih MCV-1020BA Vertical Machining Centre with Fanuc 0i-MD Control. Year 2014

Machining centres
Nikken 5 AX 5th Axis Unit.  230 SEM. Serial number 5207 Nikken 5 AX 5th Axis Unit. 230 SEM. Serial number 5207

Machining centres
2008 DMG DMU 50 2008 DMG DMU 50
With tilting rotating table to give 3 plus 2 capability. Heidenhain TNC-530 control. Ex medical research company. Superb condition
Machining centres
2011 HURCO VMX60M 2011 HURCO VMX60M
With full 4th axis. POA
Machining centres
2016 DOOSAN DNM 750 II Vertical Machining Centre.  2016 DOOSAN DNM 750 II Vertical Machining Centre.
2160mm x 762mm x 650mm, 12000 rpm 18.5KW Spindle. POA
Machining centres
HAAS VM3 Mould Maker 2010 Vertical Machining Centre HAAS VM3 Mould Maker 2010 Vertical Machining Centre
Through Spindle Coolant, Tool setter, Coolant, Interlocked guards, Low Volt Light, Programmable Coolant Nozzle, Manuals, Swing Arm Toolchanger, USB Port, Swarf Conveyor, Spindle Probe, High Speed Machining Function Control: HAAS Memory:...
Machining centres
Haas VF5 (2001) Haas VF5 (2001)
XYZ 1270/660/635 18m/Min Rapids, Table 1321 x 584, 7500rpm 20HP BT40 Spindle, 24Atc incudes 5 axis trunion table
Machining centres
1998 Mazak Integrex 200Y 1998 Mazak Integrex 200Y
Chip Conveyor, Tailstock. POA
Machining centres
2012 HURCO VM10. 2012 HURCO VM10.
X/Y/Z axis travel: 660 x 406 x 508mm, spindle nose to table 102mm, table size 762 x 406mm, 20-station tool changer, 10,000rpm spindle. POA
Machining centres
2010 HURCO VM10. 2010 HURCO VM10.
X/Y/Z axis travel: 660 x 406 x 508mm, spindle nose to table 102mm, table size 762 x 406mm, 20-station tool changer, 10,000rpm spindle . POA
Machining centres
Mazak VTC200C II (2009) Mazak VTC200C II (2009)
XYZ Table size 2000 x 510mm - Spindle #40 12,000rpm 11KW. - XYZ 1660/510/510 - 36M Rapids. - 30 ATC with Full 4th Axis.- 640 Fusion Control System. POA
Machining centres
Hurco VMX50i (2014) Hurco VMX50i (2014)
XYZ 1270/660/610 - 6500rpm 22KW 50iso Spindle - 30/30/20Min Rapids.
Machining centres
Late Hurco VMX30i Late Hurco VMX30i
XYZ 1270/508/508. Table Size 1321 x 508. Spindle 10,000rpm 15KW 40 Taper.
Machining centres
2006 HAAS VF4SS 2006 HAAS VF4SS
Side-mounted tool changer with 160mm 4th axis. POA
Machining centres
2007 MAZAK VTC-200C-II. 2007 MAZAK VTC-200C-II.
With 4th axis, spindle taper DIN40, Mazatrol 640M control, max workpiece weight 1,200kg, spindle speed 12,000rpm, table 2,000 x 510mm, 30 ATC, traverses XYZ: 1,660 x 510 x 510mm, through-spindle coolant, 4th axis rotary table,...
Machining centres
2016 XYZ LPM VMC with ProtoTrak control system. POA 2016 XYZ LPM VMC with ProtoTrak control system. POA

Machining centres
2008 HAAS VF6. 2008 HAAS VF6.
40 ATC, Renishaw/Haas spindle probe, Renishaw/Haas tool setting probe, 4th axis drive to enable hook-up for a 4th axis unit, TSC, 7,500rpm spindle. POA
Machining centres
Haas EC1600 Horizontal Machining Centre (2007) Haas EC1600 Horizontal Machining Centre (2007)
BT50 10,000rpm Traverses XYZ 1600/1000/1000 Full B axis 60 ATC
Machining centres
LITZ LH800B Morizontal Machining Centre LITZ LH800B Morizontal Machining Centre
BT50 10,000rpm Spindle. Pallet Size 800x800. Traverses XYZ 1300/1300/1200 Full B Axis, Through Spindle Coolant. 60 ATC.
Machining centres
2005 DMG 70 eVolution. Full 5-axis, Heidenhain 530 control. POA 2005 DMG 70 eVolution. Full 5-axis, Heidenhain 530 control. POA

Machining centres
XYZ 710 (2014)  SIEMENS 828D Control.  XYZ 710 (2014) SIEMENS 828D Control.
Traveres XYZ 710/450/510 Table 760mm x 430mm 8000rpm 40iso Spindle 24ATC.
Machining centres
MAZAK VTC200C II MAZAK VTC200C II
with full 4th axis, Mazatrol PC Fusion CNC 640M control, through spindle coolant, Mazatrol PC Fusion CNC 640M control spindle and tool setting probes, 48 Station toolchanger. Table size 2000 X 510MM, Traverses 1660 X 510 X 510MM, 36M/Min...
Machining centres
Bridgeport 1500 XP3 VMC Bridgeport 1500 XP3 VMC
Year: 2004 Make: Bridgeport Model: VMC 1500 XP3 Control: Heidenhain iTNC 530 Cutting Speed: 20,000mm/min Machine Dimensions L x D x H: 2695 x 2635 x 3020mm Rapid Feedrates: 36m/min Spindle Motor Power: 36m/min Spindle Speed:...
Machining centres
DAHLIH 1020BA DAHLIH 1020BA

Machining centres
MAZAK VTC-200 C Vertical Machining Centre 2000 MAZAK VTC-200 C Vertical Machining Centre 2000
x-travel 1660 mm y-travel 510 mm z-travel 510 mm table surface area 2000 x 510 mm spindle taper SK 40 spindle turning speed range 40 - 10.000 U/min spindle drive 15 kW control MAZATROL control FUSION 640 M rapid travel x/y/z 30...
Machining centres
MORI SEIKI NZ2000 T3 Y3 CNC Turning & Milling Centre MORI SEIKI NZ2000 T3 Y3 CNC Turning & Milling Centre
Type NZ 2000 T3 Y3 New in 2008 Control-Type CNC Current Location D - 77815 Bühl Origin Japan Delivery Terms immediately Quotation ex works, loaded on truck
Machining centres
DECKEL-MAHO DMU 50 T VMC, 1999, Heidenhain MillPlus DECKEL-MAHO DMU 50 T VMC, 1999, Heidenhain MillPlus

Machining centres
DECKEL-MAHO DMU 80 T Machining Centre DECKEL-MAHO DMU 80 T Machining Centre
x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TN...
Machining centres
DECKEL-MAHO MC 600 Universal Machining Centre DECKEL-MAHO MC 600 Universal Machining Centre
Storage ID 1052-06036 Category milling machining centers - universal Make DECKEL-MAHO Type MC 600 U New in 1997 Control-Type CNC Current Location D - 77815 Bühl Origin Germany Delivery Terms immediately Quotation ex works, loaded on truck
Machining centres
STEINEL 	BZ 20-1 Horizontal Machining Centre STEINEL BZ 20-1 Horizontal Machining Centre
New in 1985 x-travel 560 mm y-travel 450 mm z-travel 450 mm rotary table dia. 270 mm rotary table tiltable 0 - 24 ° spindle taper ISO 30 spindle turning speed range 31,5 - 7100 U/min feed speeds 1 - 10.000 mm/min control SINUMERIK System...
Machining centres
MAZAK VQC 20/40 CNC Vertical Machining Centre MAZAK VQC 20/40 CNC Vertical Machining Centre
New in 1984 Current Location D - 77815 Bühl-Weitenung Origin Japan Delivery Terms immediately Quotation ex works, loaded on truck Technical Details x-travel 1,000mm y-travel 508mm z-travel 460mm size of pallet 1,240 x 550mm numbers of...
Machining centres
HURON BX II CNC Vertical Machining Centre HURON BX II CNC Vertical Machining Centre
FANUC control, YOM 1986, table 1200 x 560 mm, X/Y/Z 1050/560/510 mm, spindle 15 – 4000 rpm, FANUC 11 MA, ATC 24fold
Machining centres
CNC Milling Machine DECKEL-MAHO, DMU 60 E, 1999, Heidenhain MillPlus CNC Milling Machine DECKEL-MAHO, DMU 60 E, 1999, Heidenhain MillPlus

Machining centres
5-axis Vertical Machining Centre QUASER MF 400 12C 5-axis Vertical Machining Centre QUASER MF 400 12C
Table dia: 320mm, working travel: X:410mm, Y: 610mm, Z: 510mm, A: +30°/-120°, C: 360°, tool holder: BT40, tool magazine: 30 pcs, max spindle speeds: 12,000rpm Control: Siemens Sinumerik 828D Year of production: 2013
Machining centres
CNC Vertical Machining Centre HURON KX 8 CNC Vertical Machining Centre HURON KX 8
Working travel: X: 700mm, Y: 600mm, Z: 450mm, table: 800 x 600mm, spindle: 24,000rpm, tool magazine: 20 pcs, tool holder: HSK 63-A, overall power demand: 46kW, weight: 8,000kg Control: Heidenhain 426 Year of production: 2001
Machining centres
CNN Vertical Machining Centre DECKEL MAHO DMC 60 S. 6-sided machining, bar feed CNN Vertical Machining Centre DECKEL MAHO DMC 60 S. 6-sided machining, bar feed
Working travel: X=760mm, Y=460mm, Z=560mm, A-axis, B-axis, range of spindle speeds: 14,000rpm, tool magazine: 60 pcs, tool holder: HSK A63, overall power demand: 58kVA Control: CNC Siemens 840 D Powerline Year of production: 2003
Machining centres
HURCO VMX 30 CNC Machining Centre (New in Stock) HURCO VMX 30 CNC Machining Centre (New in Stock)
Working travel: X: 760mm, Y: 510mm, Z: 520mm Control: Hurco WinMax Year of production: 2014
Machining centres
HARTFORD HV 50 S CNC Vertical Machining Centre HARTFORD HV 50 S CNC Vertical Machining Centre
Working travel X: 1,030mm, Y: 510mm, Z: 610mm, table 1,270 x 500mm, spindle 40-6,000rpm, tool chuck BT40, tool magazine 20 pcs, overall power demand 25kVA Year of production: 1996 Control: CNC Mitsubishi 520 AMR Was 19,900 EUR, NOW 14,000...
Machining centres
SPINNER VC 1300 CNC Vertical Machining Centre SPINNER VC 1300 CNC Vertical Machining Centre
Table size: 1,500 x 600mm, working travel X/Y/Z: 1,300/610/610mm Year of production: 2003 Control: CNC Siemens Sinumerik
Machining centres
HURCO VM30 Vertical Machining Centre HURCO VM30 Vertical Machining Centre
Year of production: 2012 Made in: Taiwan Working travel: X: 1 270 mm Y: 508 mm Z: 508 mm Table: 1 320 x 457 mm Spindle r.p.m. range: 8 000 rpm./min Tool magazine: 20 pcs. Tool holder: ISO 40 Control: CNC HURCO Power demnad: 15 KVA
Machining centres
HURCO VM 30 vertical CNC machining center HURCO VM 30 vertical CNC machining center
Year of production: 2012 Made in : Taiwan Working travel: X: 1 270 mm Y: 508 mm Z: 508 mm Table: 1 320 x 457 mm Spindle r.p.m. range: 8 000 rpm./min Tool magazine: 20 pcs. Tool holder: ISO 40 Control: CNC HURCO Overall power demand: 15 KVA
Machining centres
 SPINNER VC 1300, vertical CNC Machining Center SPINNER VC 1300, vertical CNC Machining Center
Year of production: 2003 Country of Origin: Germany Working travel: X: 1 300 mm Y: 610 mm Z: 610 mm Table surface: 1 500 x 610 mm Range of spindle speeds: 8 000 rpm Tool magazine: pcs Tool holder: ISO 40 Control: CNC SIEMENS
Machining centres
HURON KX 8, vertical CNC machining center HURON KX 8, vertical CNC machining center
Year of production: 2001 Made in: France Working travel: X: 700 mm Y: 600 mm Z: 450 mm Table: 800 x 600 mm Spindle rpm: 24 000 rpm./min Tools magazine: 20 St. Tool holder: HSK 63-A Control: CNC HEIDENHAIN 426 Overall power demand: 46 kW...
Machining centres
 DECKEL MAHO DMC 60 U hi-dyn, 2-pallet, head universal CNC machining center DECKEL MAHO DMC 60 U hi-dyn, 2-pallet, head universal CNC machining center
Year of production: 2002 Made in: Germany Working travel: X: 600 mm Y: 700 mm Z: 600 mm Pallet: 630 x 500 mm Range of spindle speeds:: 18 000 rpm./min Tool magazine: 120 pcs. Tool holder: SK 40 Control: CNC HEIDENHAIN 422 Weight: 9 000...
Machining centres
HURCO VM30 CNC Vertical Machining Centre HURCO VM30 CNC Vertical Machining Centre
Working travel: X=1,270, Y=508, Z=508mm, table: 1,320 x 457mm, max spindle speed: 8,000rpm, tool magazine: 20 pcs, tool holder: ISO 40, power demand: 15kVA Control: CNC Hurco Year of production: 2012
Machining centres
QUASER MF 400 12C 5-Axis CNC Vertical Machining Centre QUASER MF 400 12C 5-Axis CNC Vertical Machining Centre
Table dia: 320mm, working travel: X=410mm, Y=610mm, Z=510mm, A= +30°/-120°, C=360°, tool holder: BT40, tool magazine: 30 pcs, max spindle speeds: 12,000rpm Control: Siemens Sinumerik 828D Year of production: 2013
Machining centres
 DECKEL MAHO DMU 70 Evolution, vertical, 5-axis CNC Machining Center DECKEL MAHO DMU 70 Evolution, vertical, 5-axis CNC Machining Center
Year of production: 2007 Working travels: X axis: 750 mm Y axis: 600 mm Z axis: 520 mm B axis: 180° C axis: +/- 360° Table: 700 x 500 mm Max.weight on table: 350 kg Spindle speeds: 18,000 rpm Tool magazine: 32 pcs Tool holder: SK...
Machining centres
DECKEL MAHO DMC 60 U hi-dyn, 2-pallet, head universal DECKEL MAHO DMC 60 U hi-dyn, 2-pallet, head universal
Year of production: 2002 Made in: Germany Working travel: X: 600 mm Y: 700 mm Z: 600 mm Pallet: 630 x 500 mm Range of spindle speeds: 18 000 rpm./min Tool magazine: 120 pcs. Tool holder: SK 40 Control: CNC HEIDENHAIN 422 Weight: 9 000...
Machining centres
Haas VF6 Vertical Machining Centre with BT 50 Spindle (2002) Haas VF6 Vertical Machining Centre with BT 50 Spindle (2002)
Table size 1626 x 711mm, Traverses X-1626mm Y-813 Z-762mm, Through Coolant Spindle, BT50 Spindle, 4th Axis
Machining centres
BERTHIEZ CNC Vertical Turning BERTHIEZ CNC Vertical Turning
Digital, cap 2,800 x 550mm
Machining centres
MORI SEIKI MH-630 Horizontal Centre. Year 97. Fanuc 4-axis, BT50 MORI SEIKI MH-630 Horizontal Centre. Year 97. Fanuc 4-axis, BT50

Machining centres
OKK HM 63 Horizontal Centre OKK HM 63 Horizontal Centre
Fanuc 16IM, 4-Axis, Year 2001
Machining centres
MORI SEIKI SH8000 Horizontal Centre MORI SEIKI SH8000 Horizontal Centre
Fanuc, 4-axis, 6 pallets, 800 x 800mm
Machining centres
MAZAK FH880 Horizontal Centre MAZAK FH880 Horizontal Centre
Pallets 800 x 800mm
Machining centres
HARDINGE GX 800 Vertical Centre HARDINGE GX 800 Vertical Centre
Siemens 810, cap 800 x 540mm
Machining centres
HERMLE C 600U 5-Axis Machining Centre. Year 2000. Heidenhain TNC 430, HSK 40, 32,000rpm HERMLE C 600U 5-Axis Machining Centre. Year 2000. Heidenhain TNC 430, HSK 40, 32,000rpm

Machining centres
Cazeneuve Turning Centre Cazeneuve Turning Centre
HB 725 x 3,000mm Digital
Machining centres
Vertical Centre MAZAK AJV35/60 Mazatrol M32, cap 1,500 x 700mm Vertical Centre MAZAK AJV35/60 Mazatrol M32, cap 1,500 x 700mm

Machining centres
Vertical Centre MAZAK VTC 300C Year 2001 Vertical Centre MAZAK VTC 300C Year 2001

Machining centres
Vertical Centre HURON VX12 Vertical Centre HURON VX12
Siemens 828D. Travel 1,200 x 620 x 600mm, BT40
Machining centres
HURCO VM3 Machining Centre. 2008. HURCO VM3 Machining Centre. 2008.
Hours used 16,309. Table size 1,321 x 457mm, travels X-1,270, Y-457, Z-457mm, Hurco MAX control, 8,000rpm spindle, 20 ATC. C/w H-200 4th axis with tailstock
Machining centres
MATSUURA RA 1X Twin-Pallet VMC MATSUURA RA 1X Twin-Pallet VMC

Machining centres
DAHLIH MVC 720 DAHLIH MVC 720

Machining centres
MATSUURA RA-1X Twin-Pallet VMC MATSUURA RA-1X Twin-Pallet VMC

Machining centres
DMU 50 eVolution DMU 50 eVolution
5-axis Heidenhain control
Machining centres
HARDINGE VMC 600 II HARDINGE VMC 600 II
C/w Fanuc Control
Machining centres
MAZAK Nexus 510c VMC C/w 4th axis MAZAK Nexus 510c VMC C/w 4th axis

Machining centres
HAAS TM 3P C/w Haas 4th axis attachment HAAS TM 3P C/w Haas 4th axis attachment

Machining centres
MAZAK Nexus 510C C/w 4th axis MAZAK Nexus 510C C/w 4th axis

Machining centres
HAAS TM 3p Vertical Machining Centre HAAS TM 3p Vertical Machining Centre
C/w 4th axis. 2011
Machining centres
KITAMURA MYCENTER HX400IF Twin-Pallet HMC KITAMURA MYCENTER HX400IF Twin-Pallet HMC
C/w Fanuc control
Machining centres
 Haas VF3 complete with 4th axis Haas VF3 complete with 4th axis

Machining centres
MATSUURA MC-1000 VGX Vertical Machining Centre MATSUURA MC-1000 VGX Vertical Machining Centre

Machining centres
HAAS VF-4SS Vertical Machining Centre.Year 2015 HAAS VF-4SS Vertical Machining Centre.Year 2015
Table size 1321mm x 457mm. X/Y/Z travels 1270mm/508mm/635mm. Spindle nose to table min/max 102mm/737mm. Spindle taper BT40. Spindle speeds 12,000 rpm. Spindle power 22.5 kW (Vector drive 30hp). 24 ATC. Flood Coolant. Rigid Tapping. Tooling Package....
Machining centres
DAHLIH DL-MCV1450 Vertical Machining Centre with Fanuc 0i-MC Control. Year 2006 DAHLIH DL-MCV1450 Vertical Machining Centre with Fanuc 0i-MC Control. Year 2006
Table size 1600mm x 880mm. X/Y/Z travels 1450mm/750mm/750mm. Min/Max distance spindle nose to table top 200mm/950mm. Spindle taper BT50. Table loading 2000 kgs. Feeds 1-10,000 mm/min. Rapids X/Y 20M/min. Rapids Z 12M/min. Spindle speeds 45-4500 rpm....
Machining centres
MAZAK 430AL Vertical Machining Centre. Mazatrol Smart Control. Year 2015 MAZAK 430AL Vertical Machining Centre. Mazatrol Smart Control. Year 2015
Mazatrol Smart Control. Year 2015 Table size 900 mm x 430 mm. X/Y/Z travels 560mm x 430mm x 510mm. Toolchanger capacity 30.Spindle speeds 12,000 rpm. Rapids (all 3 axis) 42m/min. Spindle taper SK40. Thro’ spindle coolant. Cromar Swarf Conveyor...
Machining centres
HURCO VMX42i 5-Axis Vertical Machining Centre (2014) HURCO VMX42i 5-Axis Vertical Machining Centre (2014)
Traverses X Y Z: 1,067 x 610 x 610mm, table size 1,270mm x 610mm, 18kW spindle motor, 30-station side-arm ATC, DIN40 spindle taper, 10,000rpm spindle, Hurco WinMax control, coolant, manuals, swarf conveyor, rotary/tilting 5-axis...
Machining centres
MAZAK Integrex E-800V II 5-Axis Horizontal Machining Centre (2008) MAZAK Integrex E-800V II 5-Axis Horizontal Machining Centre (2008)
Maximum cutting dia 730mm, maximum workpiece weight 660kg, maximum workpiece height 1,000mm, number of pallets 2, traverses XYZ: 630 x 800 x 900mm, spindle speed 12,000rpm, spindle power 18.5kW, A-axis +120/-30 degrees, B-axis 0.001...
Machining centres
HAAS MiniMill 2 Vertical Machining Centre (2012) HAAS MiniMill 2 Vertical Machining Centre (2012)
Traverses X Y Z: 508 x 406 x 356mm, table 1,016 x 353mm, spindle taper 40, 20hp spindle motor, spindle speed 6,000rpm, Haas control, 20-station ATC, manuals, coolant. POA
Machining centres
HAAS UMC-750 5-Axis Machining Centre (2016) HAAS UMC-750 5-Axis Machining Centre (2016)
Traverses X Y Z: 762 x 508 x 508mm, 500mm x 500mm table, max table weight 300kg, table tilt +110°/-35°, 22.4kW, 8,100rpm, BT40, 40-station tool changer, coolant, toolsetter, programmable coolant, conveyor, WIPS toolsetting...
Machining centres
HAAS VF-4SS Super Speed Vertical Machining Centre (2010) HAAS VF-4SS Super Speed Vertical Machining Centre (2010)
X Y Z: 1,270 x 508 x 508mm, table 1,324 x 457mm, 12,000rpm, BT40, Haas control with HSM, 24-station ATC, 22.4kW, programmable coolant, chip auger, manuals, 4th axis interface. POA
Machining centres
 XYZ LPM Vertical Machining Centre XYZ LPM Vertical Machining Centre
Coolant, Interlocked guards, 4th axis Rotary Table, Low Volt Light, Manuals, USB Port, Swarf Auger Control ProtoTRAK PMX Maximum workpiece weight 460kg Table Size 900mm x 500mm Traverses XYZ 785 x 470 x 530mm Rapid Feedrates 20m/minute Min...
Machining centres
 HAAS VF-5 2011 Vertical Machining Centre HAAS VF-5 2011 Vertical Machining Centre
Through Spindle Coolant, Coolant, Swing Arm Toolchanger, Swarf Auger Control HAAS Main Motor 20hp Maximum workpiece weight 1814 kgs Table Size 1321 x 584 mm Traverses XYZ 1270 x 660 x 635 mm Rapid Feedrates 18 m/min Min - Max Height...
Machining centres
HAAS MiniMill 2004 Vertical Machining Centre HAAS MiniMill 2004 Vertical Machining Centre
Swarf Conveyor, Coolant, Interlocked guards, Low Volt Light, Manuals Control HAAS Memory 1mb Table Size 914 x 305mm Traverses XYZ 406 x 305 x 254mm Cutting Speed 12.7m/minute Rapid Feedrates 15.2m/minute Min - Max Height under Spindle...
Machining centres
HAAS TM-1P Toolroom CNC Mill (2017) HAAS TM-1P Toolroom CNC Mill (2017)
Traverses X Y Z: 762 x 305 x 406mm, table 1,213 x 267mm, spindle speed 40-6,000rpm, spindle taper BT40, spindle motor 5.6kW, Haas control, 10-station turret, low-volt light, coolant. POA
Machining centres
Binns & Berry Data 200 CNC Turning Centre Binns & Berry Data 200 CNC Turning Centre
1200mm x 4000mm, 160mm spindle bore, Fanuc 18iT Control, boring attachment, fixed & travelling steadies, Swarf Conveyor.
Machining centres
Denford Micromill CNC VMC, Stepper Motors, Sept 2001, 240V Single Phase Denford Micromill CNC VMC, Stepper Motors, Sept 2001, 240V Single Phase
Denford Micromill CNC Vertical Machining Centre, Stepper Motors, Sept 2001, 240V Single Phase. Price
Machining centres
Heidenhain Programmer iTNC530 USB Control, Heidenhain Programmer iTNC530 USB Control,
Heidenhain Programmer iTNC530 USB Control, The iTNC 530 from HEIDENHAIN is a versatile, workshop-oriented contouring control for milling, drilling and boring machines as well as machining centers http://www.heidenhain.com/en_US/products/cnc-contro...
Machining centres
BRIDGEPORT VMC 600 XR 5AX 5-Axis Machining Centre. 60 ATC, Renishaw OMI-2T probe, Heidenhain iTNC530, Year 2011 BRIDGEPORT VMC 600 XR 5AX 5-Axis Machining Centre. 60 ATC, Renishaw OMI-2T probe, Heidenhain iTNC530, Year 2011

Machining centres
MORI SEIKI, MATSUURA, DAEWOO, DOOSAN, MAZAK, TOYODA, HELLER and GROB Horizontal Machining Centres MORI SEIKI, MATSUURA, DAEWOO, DOOSAN, MAZAK, TOYODA, HELLER and GROB Horizontal Machining Centres

Machining centres
MORI SEIKI, MATSUURA, DAEWOO, DOOSAN, MAZAK, BRIDGEPORT and HAAS Vertical Machining Centres MORI SEIKI, MATSUURA, DAEWOO, DOOSAN, MAZAK, BRIDGEPORT and HAAS Vertical Machining Centres

Machining centres
MIKRON UCP 600 Five Axis Machining Centre MIKRON UCP 600 Five Axis Machining Centre
MIKRON +GF+ AGIE CHARMILLES UCP 600 5 Axis Machining Center New 2008 With HEIDENHAIN iTNC 530 five axis control Rotary table diameter: 400 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y axis): 450 mm Vertical travel (z axis):...
Machining centres
2013 LITZ LU620. 2013 LITZ LU620.
Full 5-axis, B-axis tilting range -50/+110º, Heidenhain TNC-530 control, max workpeice weight 300kg, rapid feedrates 36m/min, spindle 18/21kW, 12,000rpm, table dia 650mm, traverses XYZ: 620 / 520 / 460mm, through-spindle coolant....
Machining centres
2012 & 2014 DOOSAN DNM 650 (3-off) 2012 & 2014 DOOSAN DNM 650 (3-off)
Fanuc OI-MC control, min/max height under spindle: 150-775mm, spindle centre to column 747mm, spindle 15kW, 12,000rpm, table 1,300 x 670mm, 30 ATC, traverses XYZ: 1,270 x 670 x 625mm, tool change time (chip to chip) 3.7 seconds,...
Machining centres
2007 CINCINNATI CFV5-i 5-axis. 2007 CINCINNATI CFV5-i 5-axis.
A-axis +30~120º, C axis 0.001º (360º full rotation), Fanuc 18IMB control, number of axes controlled 5 (4 simultaneous), spindle 18.5kW, 10,000rpm, table 350mm, 30 ATC, traverses XYZ: 600 x 540 x 540mm, coolant, interlocked guards,...
Machining centres
2006 XYZ 710 Mini Mill. POA 2006 XYZ 710 Mini Mill. POA

Machining centres
2011 MIKRON UCP 600 Vario 5-Axis. 2011 MIKRON UCP 600 Vario 5-Axis.
B-axis -115/+30º, C-axis 0.001º (360º full rotation), Heidenhain TNC-530I control, max workpeice weight 400kg, number of axes controlled 5 (simultaneous), spindle 30kW, table 280 x 280mm, 30 ATC, HSK A63, traverses XYZ: 600 x 450 x...
Machining centres
2017 HURCO VMX64i. 2017 HURCO VMX64i.
Spindle taper BT50, max workpiece weight 2,722kg, rapids: 18/18/13.5m/min, spindle motor power 22kW, spindle nose to table surface (min) 152mm, spindle speed 8,000rpm, table size 1,676 x 889mm, 30 ATC (swing arm), traverses XYZ:...
Machining centres
2017 HURCO DCX22i. 2017 HURCO DCX22i.
Table size 2,100 x 1,600mm, spindle taper BT50, max workpeice weight 8,000kg, rapid feedrates 32/32/24m/min, spindle motor power 26kW, spindle nose to table surface 152mm / 902mm, spindle speed 6,000rpm, table size 2,100 x 1,600mm,...
Machining centres
2007 Bridgeport Hardinge XR1000 Nikken 5-axis rotary table, Heidenhain TNC 530 control 2007 Bridgeport Hardinge XR1000 Nikken 5-axis rotary table, Heidenhain TNC 530 control

Machining centres
2012 HAAS TM2P. Ex film company. Really nice condition. With tooling 2012 HAAS TM2P. Ex film company. Really nice condition. With tooling

Machining centres
2008 DECKEL MAHO DMU 50 2008 DECKEL MAHO DMU 50
Ex medical research company. Low hours. Superb condition. Hand tilting and rotating 5-axis table that reads off on the control. Heidenhain TNC 530 control. Ideal toolmakers machine
Machining centres
2005 DMG 70 eVolution. 2005 DMG 70 eVolution.
Full 5-axis, Heidenhain 530 control, spindle speed 0-18,000rpm, 32 ATC, travels X=750mm, Y=600mm, Z=520mm. POA
Machining centres
(2-off) 2011 HAAS VF-6. (2-off) 2011 HAAS VF-6.
TRT 210 B-axis unit, Haas control, max height from table to spindle centre line 102-864mm, max workpiece weight 1,814kg, rapid feedrates XYZ: 25.4 x 25.4 x 18m/minute, spindle 20hp, 7,500rpm, table 1,626 x 711mm, 24 ATC, BT40,...
Machining centres
2008 MAZAK Integrex 800V/5 II E Tower. 2008 MAZAK Integrex 800V/5 II E Tower.
B-axis movement head: +120/-30°, Mazak Matrix control, max machining dia 730mm, maximum workpeice weight 680kg, rapid feedrates 50m/min, spindle speed 12,000rpm (milling), 80 ATC, traverses XYZ: 1,100/800/900mm, through-spindle...
Machining centres
2005 HURCO VM1 2005 HURCO VM1
Ultimax 4 twin-screen control, spindle nose DIN40, spindle speed 8,000rpm, table size 762mm x 356mm, 16 ATC, traverses XYZ: 560mm x 356mm x 457mm, coolant. POA
Machining centres
2010 MIKRON HPM 800U 2010 MIKRON HPM 800U
Spindle taper HSK63, max workpiece size 800kg, number of axes controlled 5/5 simultaneous, spindle speed 20,000rpm, table size 500 x 631mm, 165 ATC, traverses XYZ: 800 x 800 x 550mm, machine weight 15,500kg, through-spindle coolant,...
Machining centres
2015 FEELER VMP32A-APC 2015 FEELER VMP32A-APC
Spindle taper 40, rapid feedrates XYZ: 40/40/30m/min, spindle centre to column surface 560mm, spindle motor power 7.5/11kW, spindle nose to table surface 148-653mm, spindle speed 10,000rpm, table size 700 x 500mm, 24 ATC,...
Machining centres
2007 DOOSAN DNM400. Fanuc OI control 2007 DOOSAN DNM400. Fanuc OI control

Machining centres
2007 DOOSAN NM510 2007 DOOSAN NM510
Fanuc I Series, cutting speed 20-15,000mm/min, distance from spindle centre to column 587mm, max workpeice weight 800kg, min/max height under spindle 150/660mm, rapids XYZ: 36 x 36 x 30m/min, spindle motor power 15/11kW, spindle speed...
Machining centres
2007 HARDINGE BRIDGEPORT GX600 2007 HARDINGE BRIDGEPORT GX600
Heidenhain TNC530I control, max height from table to spindle centre line 145-685mm, max workpiece weight 800kg, rapids 36m/min, spindle motor power 15kW, spindle speed 10,000rpm, table size 750 x 540mm, 24-station tool changer, tool...
Machining centres
2016 HAAS VF2 2016 HAAS VF2
Haas control, cutting speed 16.5m/min, min/max height under spindle 102/610mm, rapids 18m/min, spindle motor power 20hp, spindle speed 8,100rpm, table size 914 x 356mm, 20-station tool changer, tool size BT40, traverses XYZ: 762...
Machining centres
2019 Mikron Mill E 500 U 2019 Mikron Mill E 500 U
5-axis Machining Centre Heidenhain iTNC 530 Table size ø 500 mm Max weight on table 300 kg X/Y/Z Travels 500 mm B-axis -65°/+120° C-axis 360° x 0.001° EC conformity declaration Spindle 20.000 min-¹/ - HSK-A63 Tool magazine CT60 /...
Machining centres
2019 Mikron Mill E 700 U 2019 Mikron Mill E 700 U
5-axis Machining Centre Heidenhain iTNC 530 Table size ø 630 mm Max weight on table 450 kg Travels X/Y/Z 700/600/500 mm B-axis -65°/+120° C-axis 360° x 0.001° EC conformity declaration Spindle 20.000 min-¹/ - HSK-A63 Tool magazine CT60 /...
Machining centres
2019 Haas VF-4SS 2019 Haas VF-4SS
Vertical Machining Centre Haas control Table size 1321 x 457 mm X/Y/Z Travels 1270/508/635 mm T-Slot width 16 mm T-Slot centre distance 80 mm Number of Std T-slots 5 Spindle Nose to Table (~ max) 737 mm Spindle Nose to Table (~ min) 102 mm...
Machining centres
CHIRON Model FZ15K. 5-axis VMC, Heidenhain 530 control, XYZ: 500, 400, 360mm CHIRON Model FZ15K. 5-axis VMC, Heidenhain 530 control, XYZ: 500, 400, 360mm

Machining centres
2004/2005 Brother TC32-B 2004/2005 Brother TC32-B
Vertical Machining Centre CNC Control BROTHER CNC-B00 Table size 600 x 425 mm. Number of pallets: 2 Movement X-Axis 550 mm. Movement Y-Axis 400 mm. Movement Z-Axis 415 mm. Number of tools in magazine 26 pieces. Maximum spindle speed 12000...
Machining centres
1997 Bridgeport VMC 500/16 1997 Bridgeport VMC 500/16
Vertical Machining Centre Heidenhain TNC 370 Control 16-Station Tool Changer Table Size 830mm x 360mm X/Y/Z 500/340/520 mm 16 Tools ISO 40 Tooling Spindle speeds ~ 7000 rpm Spindle motor 7.5 kW Max table load 500 kg Kitagawa...
Machining centres
2009 Mazak VC Nexus 410 A II 2009 Mazak VC Nexus 410 A II
Vertical Machining Centre Mazatrol Matrix Nexus Control Table 900 x 410 mm Height of table surface 895 mm Number of T-slots 3 X/Y/Z Travels 560/410/510 mm X/Y/Z Rapids 36/36/36 m/min Spindle speeds 40 - 12,000 rpm Spindle nose ISO...
Machining centres
MAZAK VC Nexus 510 C II HS (high speed) MAZAK VC Nexus 510 C II HS (high speed)
twin pallets. Matrix control
Machining centres
MAZAK VTC800/30 MAZAK VTC800/30
3,500 x 820 table, Matrix control
Machining centres
2007 Matsuura MAM 72-25 V 2007 Matsuura MAM 72-25 V
5-Axis Twin Pallet VMC Fanuc G-Tech 30i Control Twin Pallet Changer X/Y/Z Travels 550/410/450 mm B-axis ±220° C-axis 360° Rapids X/Y/Z 50 m/min Rapids B/C axis 30/50 rpm Spindle speeds ~ 20000 rpm Hydraulic tailstock ATC 120 (modular...
Machining centres
2014 Matsuura MAM 72-35 V 2014 Matsuura MAM 72-35 V
5-Axis Twin Pallet VMC Fanuc G-Tech 31iB Control Twin Pallet changer 5-axis Integral Unit with ø 130 mm work pallet X/Y/Z travels 550/440/580 mm B-axis +65° / -125° C-axis 360° Rapids X/Y/Z 60/60/60 m/min Rapids B/C 50/100 rpm Max...
Machining centres
2010 Makino D 500 2010 Makino D 500
5-Axis Machining Centre Fanuc Professional 5 X/Y/Z 550/1000/500 A-axis +30° / -120° C-axis 360° (continuous rotation) / rotary encoder Rapids X/Y/Z 48/50/50 m/min Feedrate X 1 - 32000 mm/min Feedrate Y/Z: 1 - 40000/40000 mm/min Feedrate...
Machining centres
Supermax YCM158B (9852) Supermax YCM158B (9852)
Supermax YCM158B, 2003, s/n 301096, Heidenhain TNC426 Control, table 1700 x 860mm, trav 1500 x 860 x 750mm, feed fates X,Y - 15m/min, Z - 12m/min, BT50, 45-6,000rpm, 24atc, 15/18.5kw
Machining centres
2007 Mazak Integrex e-800V/5 II 2007 Mazak Integrex e-800V/5 II
Twin Pallet Mill/Turn Vertical Machining Centre Mazatrol Matrix Maximum workpiece ø 730 mm Maximum workpiece height 1000 mm Max pallet load 880 kg X/Y/Z 630/800/900 mm Spindle speeds 35 - 12000 RPM Spindle nose CAPTO C6 Main spindle motor...
Machining centres
Supermax YCM FV56A APC-Fanuc (9799) Supermax YCM FV56A APC-Fanuc (9799)
Supermax YCM FV56A APC, 2005, Heidenhain iTNC530 control, Twin Pallet, s/n 0666, Pallets : 560 x 410mm, Movement 560 x 410 x 450mm, Rapid X & Y36 m/min, Z 24 m/min, , spindle speed 40-10000 Rpm, spindle power 7.5 kW, spindle BT40, 20 position Atc,...
Machining centres
CINCINNATI Arrow-2 750 VMC (9560) CINCINNATI Arrow-2 750 VMC (9560)
CINCINNATI Arrow-2 750 VMC: 2003 s/n 7043-HoA-KE1815, Heidenhain 530I control, Table size, Table size 950 x 520mm, X-Axis travel: 760mm, Y-Axis travel: 510mm, Z-Axis travel: 510mm, Spindle nose to table: 125 - 630mm, Table load capacity: 1,650 Lbs,...
Machining centres
XYZ UMC 4+1 XYZ UMC 4+1
After the successful launch of the UMC-5X, we introduced the lower cost, multi-face machining option. The XYZ UMC 4+1 shares the same machining envelope as the UMC-5X, with axis travels of 600 by 600 by 500 mm (XYZ) and a 600 mm trunnion-style...
Machining centres
XYZ ProtoTRAK 2-OP XYZ ProtoTRAK 2-OP
The XYZ 2-OP, a portable VMC designed and built to liberate your more expensive machine tools from the every day drudgery of ”second operations”. The XYZ 2-OP features the ”easy to use” ProtoTRAK® control. The XYZ 2-OP is so easy to use that... With video
Machining centres
XYZ ProtoTRAK LPM XYZ ProtoTRAK LPM
The LPM (Lean Production Machine) is the complete machining system that makes idle machine time a thing of the past. 15 HP SPINDLE 900 x 500mm TABLE 785 x 470 x 530mm TRAVEL 8000 RPM SPINDLE
Machining centres
XYZ 500 LR XYZ 500 LR
The LR range of  machines offer a lower cost introduction to VMC ownership. 18 HP / 13kW SPINDLE 580 x 400 mm TABLE 510 x 400 x 450 mm TRAVEL 8000 RPM SPINDLE SOLID CASTING 2400 KG
Machining centres
XYZ 750 LR XYZ 750 LR
The LR range of  machines offer a lower cost introduction to VMC ownership. 18 HP / 13kW SPINDLE 830 x 410 mm TABLE 750 x 440 x 500 mm TRAVEL 8000 RPM SPINDLE SOLID CASTING 3500 KG
Machining centres
XYZ 1000 LR XYZ 1000 LR
The LR range of  machines offer a lower cost introduction to VMC ownership. 18 HP / 13kW SPINDLE 1060 x 500 mm TABLE 1000 x 500 x 500 mm TRAVEL 8000 RPM SPINDLE SOLID CASTING 4600 KG
Machining centres
XYZ Mini Mill 560 HD XYZ Mini Mill 560 HD
Optimise the profitability of a small space with this top selling VMC. Not to be confused with the competitors lighter less robust attempts at the Mini Mill. The 560 HD VMC is at the top of its class with power and performance in abundance. 18 HP...
Machining centres
XYZ 710 HD VMC XYZ 710 HD VMC
This 710 HD VMC offers greater capacity and performance at a very competitive price. 23HP / 17kW SPINDLE 760 x 430 mm TABLE 710 x 450 x 500 mm TRAVEL 8000 RPM SPINDLE SOLID CASTING 4000 KG
Machining centres
XYZ 1510 HD VMC XYZ 1510 HD VMC
1500mm ‘X’ travel on this solid cast machine, with a hunger for metal removal. 23HP / 17kW SPINDLE 1600 x 600 mm TABLE 1500 x 600 x 600 mm TRAVEL 8000 RPM SPINDLE SOLID CASTING 9000 KG
Machining centres
XYZ 2010 HD VMC XYZ 2010 HD VMC
All XYZ Heavyweights have 1 metre Y axis travel. 56 HP / 42kW SPINDLE TABLE 2200 x 1000 mm TRAVEL 2000 x 1000 x 800 mm 8000 RPM SPINDLE 16 M/MIN RAPIDS SOLID CASTING 20,000 Kg (Image shows XYZ 3010 HD)
Machining centres
XYZ 2510 HD VMC XYZ 2510 HD VMC
All XYZ Heavyweights have 1 metre Y axis travel. 56 HP / 42kW SPINDLE TABLE 2700 x 1000 mm TRAVEL 2500 x 1000 x 800 mm 8000 RPM SPINDLE 16 M/MIN RAPIDS SOLID CASTING 23,000 Kg (Image shows XYZ 3010 HD)
Machining centres
XYZ 3010 HD VMC XYZ 3010 HD VMC
All XYZ Heavyweights have 1 metre Y axis travel. 56 HP / 42kW SPINDLE 3100 x 1000 mm TABLE 3000 x 1000 x 800 mm TRAVEL 8000 RPM SPINDLE 16 M/MIN RAPIDS SOLID CASTING 25,000 Kg
Machining centres
XYZ TCM XYZ TCM
Make easy work of those big energy, aerospace or any other larger components with the XYZ range of large X-axis Travelling Column machines. The machines benefit from the latest Siemens 828D Shopmill control featuring advanced and easy to ways that...
Machining centres
XYZ 1060 HS VMC XYZ 1060 HS VMC
This XYZ flag ship ‘High Speed VMC’ offers capability and performance to the ‘high end’ user. 23 HP / 17kW SPINDLE 1200 x 600 mm TABLE 1020 x 610 x 620 mm TRAVEL 12000 RPM SPINDLE (15000 RPM Option Available) SOLID CASTING 7500 KG
Machining centres
XYZ UMC-5X XYZ UMC-5X
High precision, high speed, simultaneous 5 axis VMC. A high precision, high speed, simultaneous 5 axis VMC.  The XYZ UMC-5X is purposely designed for complex and multi surface machining.
Machining centres
SUNDSTRAND Omnimill Horizontal Machining Centre SUNDSTRAND Omnimill Horizontal Machining Centre
Travels (mm) X6700 Y2450 Z1370 B-axis (°) 360 000 Table size (mm) 2438 X 1828 Weight admitted (T) 9 Main motor power (Hp) 40 Machine equipped with : CNC NUM 760 / Swarf conveyor / 2x tables
Machining centres
DMG DMC 63 V Vertical Machining Centre DMG DMC 63 V Vertical Machining Centre
Reference: CUV015 Model DMC 63V Serial number 28850007892 YOM 1999 Travels (mm) X630 Y500 Z500 Table size (mm) 800 x 500 Max distance table-spindle noze (mm) 150-650 ATC 24 pos Spindle attachment (Iso) 40 Spindle speeds (Rpm) 8000 Feeding...
Machining centres



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy