Inter-plast

rss

Category: Gear Cutting

Gear hobber, gear shaper, gear shaver

Pfauter P400 Pfauter P400
This Pfauter P400 Gear Hobbing Machine was rebuilt in 2007. It has a new control structure with S7 PLC panel. This machine operates through two servo motors for axial (Z-axis) and table drive (C-axis). Retrofitted as special milling machine for...
Gear Cutting
FELLOWS Number 7 Gear Shaper. FELLOWS Number 7 Gear Shaper.
Pitch dia external 7in, pitch dia internal 5-1/2in, face width external 1-1/2in, face width internal 1in, diametral pitch – for spur gears 6, for helical 6/8, max helix angle with standard guides 45º. Approximate weight 1,451kg. Change...
Gear Cutting
GLEASON Number 12 Straight Bevel Gear Generator GLEASON Number 12 Straight Bevel Gear Generator
Max cone dist 610mm, max pitch angle (angular gears) 108°, max pitch angle (shaft at 90°) 84.18º, max pitch angle 5.42º, extreme ratio 10/1, index range 10-200, largest pitch 3 DP, main motor 3hp (1,800rpm). Complete with change...
Gear Cutting
GLEASON Number 24 Gear Generator GLEASON Number 24 Gear Generator
Longest cone dist (13/4in stroke) 18in (457mm), shortest cone distance 0, max pitch dia 10 to 1 ratio 35.5in, max pitch dia 2 to 1 ratio 31.75in, max pitch dia 1 to 1 ratio 25in, min pitch angle 5.42º, extreme ratio 10 to 1, max pitch...
Gear Cutting
MIKRON 102 MPS Hobbing machine MIKRON 102 MPS Hobbing machine
Reference: TFM002 Model 102 MPS
Gear Cutting
BARBER COLMAN 16/56 Horizontal Hobber BARBER COLMAN 16/56 Horizontal Hobber
Stock no 28888 Max rated diametral pitch (nominal) 6 DP (4.2 Module), max rated dia of work 16in (400mm), max hob dia 5in (127mm), max hob-slide travel 56in (1,422.4mm)
Gear Cutting
SYKES 5E Gear Generator for Double Helical (Herring-bone) Single Helical & Internal Gears SYKES 5E Gear Generator for Double Helical (Herring-bone) Single Helical & Internal Gears
Stock no 28890 Pitch range (min) 1.5 DP, 17 Module, pitch range (max) 16 DP, 17 Module, helix angle range 0-45º, spindle bore 9.875in/250mm, max dia 63in/ 1,600mm, max face width 18in/457mm, max face with for spur or single helical...
Gear Cutting
SUNDERLAND G150 HV Spur & Single Helical Gear Planing Machine. SUNDERLAND G150 HV Spur & Single Helical Gear Planing Machine.
Stock no 28740 Max outside dia 1,520mm, max face width 300mm, max normal pitch Module 12 (2 DP), max helix angle 60°, cutting speeds 13-51 strokes per minute
Gear Cutting
BARBER COLMAN 16/36 Horizontal Hobber. BARBER COLMAN 16/36 Horizontal Hobber.
Stock no 28887 Max rated diametral pitch (nominal) 6 DP (4.2 Module), max rated dia of work 16in (406mm), max hob dia 5in (127mm), max hob-slide travel 36in (914.4mm)
Gear Cutting
DAVID BROWN Model 140 Heavy Duty Hobber. DAVID BROWN Model 140 Heavy Duty Hobber.
Stock no 28883 Max dia 149in (3,784mm), max dia of hob 13in (330mm), min/max work height 30in/86in (762mm/2,184mm), change gears
Gear Cutting
Maag SH75 Gear Shaper Maag SH75 Gear Shaper
Maag SH75 Gear Shaper Max. wheel diameter 750 mm Gear width 200 mm Max. module 10 Min. module 1 Min. wheel diameter 30 mm Max. number of teeth 300 Min. number of teeth 6 Tooth helical angle min/max 0 / 60 ° Min. ram stroke 0 mm Max. ram...
Gear Cutting
Gleeson Number 12 Straight Bevel Gear Generator Gleeson Number 12 Straight Bevel Gear Generator
Gleeson Number 12 Straight Bevel Gear Generator Max cone distance: 610 mm Max pitch angle (angular gears): 108° Max pitch angle (shaft @ 90°): 84° 18' Max pitch angle: 5° 42' Extreme ratio: 10/1 Index range: 10-200 Largest pitch: 3 DP Main...
Gear Cutting
Gleeson No 24 Gear Generator Gleeson No 24 Gear Generator
Gleeson No 24 Gear Generator Longest cone distance (1 3/4? stroke) 18? (457mm) Shortest cone distance 0 Max. pitch diameter 10 to 1 ratio 35.5? Max. pitch diameter 2 to 1 ratio 31.75? Max. pitch diameter 1 to 1 ratio 25? Min. pitch angle...
Gear Cutting
Fellows Number 7 Gear Shaper Fellows Number 7 Gear Shaper
Fellows Number 7 Gear Shaper Pitch Diameter External 7? Pitch Diameter Internal 5-1/2? Face Width External 1-1/2? Face Width Internal 1? Diametral Pitch – For Spur Gears 6 For Helical 6/8 Maximum Helix Angle With Standard Guides 45...
Gear Cutting
TOS – OFA 71A TOS – OFA 71A
Rolling milling machine OFA 71A. Technical data: Maximum module: 10 mm Maximum diameter of spur gear: 710 mm Maximum hob slide travel: 450 mm Distance between workpiece and hob axes - min./max.: 60/580 Maximum helix angle of...
Gear Cutting
MAAG SH75 Gear Shaper MAAG SH75 Gear Shaper
Serial number 4730. With change gears, accessories and manuals
Gear Cutting
MAXICUT Gear Shapers MAXICUT Gear Shapers
Complete with change gears. Choice
Gear Cutting
TOS Gear Hobber OF71 Vertical Gear Hobber. TOS Gear Hobber OF71 Vertical Gear Hobber.
Approx 30in between centres, with mandrel, work holding, coolant
Gear Cutting
Niles ZSTZ 630 CI Gear Grinder. Niles ZSTZ 630 CI Gear Grinder.
Serial number 40/09-29. Weight 5,300kg. New 1974
Gear Cutting
Reishauer NZA Gear Grinder. Reishauer NZA Gear Grinder.
With Fassler dressing device. Serial number 22475-7. New 1970
Gear Cutting
PFAUTER 16in Gear Hobber PFAUTER 16in Gear Hobber

Gear Cutting
MAXICUT 3A (18in) MAXICUT 3A (18in)

Gear Cutting
FELLOWS 7125A 10in with 8in Riser FELLOWS 7125A 10in with 8in Riser

Gear Cutting
SYKES HV14 Gear Hobber SYKES HV14 Gear Hobber

Gear Cutting
SYKES HV14A 14in dia Gear Hobber SYKES HV14A 14in dia Gear Hobber

Gear Cutting
SYKES V4 Gear Shaper SYKES V4 Gear Shaper

Gear Cutting
REISHAUER Aza Gear Grinding . With Fassler REISHAUER Aza Gear Grinding . With Fassler

Gear Cutting
PFAUTER P630 Gear Hobbing. Capacity 630mm, change gears PFAUTER P630 Gear Hobbing. Capacity 630mm, change gears

Gear Cutting
HOFLER Nova 1000 CNC Gear Grinder. Year 1999 HOFLER Nova 1000 CNC Gear Grinder. Year 1999

Gear Cutting
HAMAI Gear Hobbing HAMAI Gear Hobbing

Gear Cutting
MAAG SH 45 Gear Shaper MAAG SH 45 Gear Shaper

Gear Cutting
KLINGELNBERG SNC 31 Hob Sharpener KLINGELNBERG SNC 31 Hob Sharpener

Gear Cutting
PFAUTER P403 Gear Hobber. Year 1981. Cap 400mm PFAUTER P403 Gear Hobber. Year 1981. Cap 400mm

Gear Cutting
PFAUTER P400 Gear Hobber PFAUTER P400 Gear Hobber

Gear Cutting
MIKRON Type A35/36 CNC Gear Hobber. Year 1991. Gear dia 150 x 300mm modul 4.5 MIKRON Type A35/36 CNC Gear Hobber. Year 1991. Gear dia 150 x 300mm modul 4.5

Gear Cutting
MIKRON 102.05SPS Gear Hobber. Year 1989. Cap 120 x 130mm, modul 2 MIKRON 102.05SPS Gear Hobber. Year 1989. Cap 120 x 130mm, modul 2

Gear Cutting
WERA RM 80 Profilator WERA RM 80 Profilator
with Siemens control
Gear Cutting
GLEASON 650 Hypoid Gear Generator. GLEASON 650 Hypoid Gear Generator.
Rougher & Finishing Machine
Gear Cutting
SNOW Vertical Spindle Surface Grinder. SNOW Vertical Spindle Surface Grinder.
1m x 350mm magnetic chuck, wheel dia 350 x 50mm, with over-head wheel dresser
Gear Cutting
TOS OF71 Vertical Gear Hobber. TOS OF71 Vertical Gear Hobber.
Approx 30in between centres, with mandrel and work holding, coolant
Gear Cutting
Sykes V400 Gear Shaper. S/n 260/17 Sykes V400 Gear Shaper. S/n 260/17

Gear Cutting
TOS Gear Hobber OF71 Vertical Gear Hobber. Approx 30in between centres TOS Gear Hobber OF71 Vertical Gear Hobber. Approx 30in between centres

Gear Cutting
Sykes V400 Gear Shaper Sykes V400 Gear Shaper

Gear Cutting
ORT RP30MS (1997)  Hydraulic Thread Rolling Machine with Splining Facility. ORT RP30MS (1997) Hydraulic Thread Rolling Machine with Splining Facility.
Max pressure 300kN (30 tonne), max workpiece dia 100mm, max die width 200mm, spindle dia 69.85mm, spindle speeds 30-90rpm, main motor 15kW. Excellent condition
Gear Cutting



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy