MG Welding

rss

Category: Lathes - general

universal lathes general lathes

2090mm dia Faceplate, Split Bed Facing Lathe 2090mm dia Faceplate, Split Bed Facing Lathe
Manufacturer: TADU Model: FS750 Serial No.: 203 Maximum Swing: 2160mm Swing over base.: 1280mm Swing over cross slide: 740mm X AxisTraverse: Top slide 750mm + saddle 700mm by hand or power Z Axis Traverse: Saddle 200mm + compound slide 350mm...
Lathes - general
630mm x 2000mm CNC Lathe.  With Siemens 810D CNC Control.  Manufactured 2008 630mm x 2000mm CNC Lathe. With Siemens 810D CNC Control. Manufactured 2008
Manufacturer: FAT Model: TUR MN Year of Manufacture: 2008 Distance between centres: 2000mm Swing over bed: 630mm Swing over cross slide: 370mm Spindle speeds: 2-2500 rpm Spindle bore: 105mm Feed rate: 8m/min 3 jaw chuck: 350mm 4 jaw chuck:...
Lathes - general
Lathe Lathe
Manufacturer: POREBA Model: TR80 [Ref: J34040]
Lathes - general
Lathe Lathe
Manufacturer: BSA Model: C6251 x 2000 [Ref: J34043]
Lathes - general
1000mm Swing x 3000mm Heavy Duty Lahe.   Serial No. 12-41.  With 4 Jaw Chuck,Spindle Bore 76.5mm.  20HP Motor 1000mm Swing x 3000mm Heavy Duty Lahe. Serial No. 12-41. With 4 Jaw Chuck,Spindle Bore 76.5mm. 20HP Motor
Manufacturer: GURUTZPE Model: Super AT Location: HOSE Serial No.: 12 - 41 Height of centres: 500mm Between centres: 3000mm Swing over bed: 1000mm Swing over cross slide: 700mm Swing in gap: 1270mm Spindle speeds: 9 - 500 rpm Spindle bore:...
Lathes - general
250mm x 1000mm CNC Lathe.  Mazatrol Nexus 640T Control.  Manufactured 2005 250mm x 1000mm CNC Lathe. Mazatrol Nexus 640T Control. Manufactured 2005
Manufacturer: MAZAK Model: QTN250-1000L [Ref: J34102]
Lathes - general
CNC Facing Lathe. NUM T Plus Control. 1450mm swing CNC Facing Lathe. NUM T Plus Control. 1450mm swing
Manufacturer: TADU Model: FS750 Serial No.: 13585 Year of Manufacture: 1984 Swing over bed: 1450 mm Swing over cross slide: 600 mm Traverse: Z axis 350 mm, X Axis 700 mm. Chuck to turret face: 680 mm Input: 380/3/50 20 hp approx. Spindle...
Lathes - general
32 x 216 / 813mm x 5486mm Lathe 32" x 216" / 813mm x 5486mm Lathe
Manufacturer: DEAN SMITH & GRACE Model: 30x216 Location: HOSE Serial No.: 39052-10-71 Year of Manufacture: 1971 Height of centres: 15" / 381mm Between centres: 216" / 5486mm Swing over bed: 32" / 813mm Swing over cross slide: 22" /...
Lathes - general
Mazak INTEGREX 200-IV Mazak INTEGREX 200-IV
This Mazak INTEGREX 200-IV Lathe was manufactured in 2008 in Japan. It has a total of 65396 hours. It is operated through a MAZATROL MATRiX control unit. This 5 axis machine can perform with a speed up to 5000 rpm, and a max. working diameter of 660...
Lathes - general
HAAS ST-30 Lathe HAAS ST-30 Lathe
This HAAS ST-30 Lathe was manufactured in the United States in the year 2011. It is operated through a control unit of the same brand. This machine works with a spindle speed up to 3400 rpm. It is in good working conditions. [Ref:...
Lathes - general
Benzinger TNI - B6 Benzinger TNI - B6
This Benzinger TNI - B6 Lathe from 2006 was built in Germany. It has been working for 39000 hours, of which 10000 are cutting time. This machine operates through a SIEMENS 840 D control unit. It performs with a spindle speed up to 6000 rpm and a...
Lathes - general
NAKAMURA-TOME TMC 12 Lathe NAKAMURA-TOME TMC 12 Lathe
This NAKAMURA-TOME TMC 12 Lathe was built in the year 2000. It is operated through a FANUC control unit. It has approximately 3500 hours. This 2 axis machine can perform with a maximum turning length 200 mm. [Ref: ES-TUR-NAK-2000-00001]
Lathes - general
EMCO Turn 325-II Lathe EMCO Turn 325-II Lathe
This EMCO Turn 325-II Lathe was manufactured in the year 2002 in Austria. It is equipped with a Siemens Sinumerik 840D/810D control unit. This 2 axis machine can work wit a spindle speed up to 6300 rpm, a max turning diameter 85 mm, and a max part...
Lathes - general
DMG Mori Seiki NZX-S1500/500 Lathe DMG Mori Seiki NZX-S1500/500 Lathe
This DMG Mori Seiki NZX-S1500/500 Lathe was made in the year 2013 in Japan. It has been working for only 6346 hours since then. This milling and a turning center comes with a coolant system with increased pressure 5 bar. [Ref:...
Lathes - general
EMAG VTC 250 DUO EMAG VTC 250 DUO
This EMAG VTC 250 DUO Lathe was built in 2010. It is equipped with a Siemens 840D control unit. This 3 axis machine can perform with a spindle speed up to 6000 rpm an a clamping force 2.4 kN. [Ref: DE-TUR-EMA-2010-00001]
Lathes - general
Gildemeister Sprint 65 Linear Gildemeister Sprint 65 Linear
This Gildemeister Sprint 65 Linear lathe machine was built in 2006 in Italy. The machine has a record of 32648, of which 14482 are operating hours. It is operated through a FANUC 310i control unit. This 10 axis machine has a main spindle speed up to...
Lathes - general
Hyundai Kia SKT250Y Lathe Hyundai Kia SKT250Y Lathe
This Hyundai Kia SKT250Y Lathe was manufactured in the year 2010 in Korea. It has a production history of only 2758 working hours. It is equipped with a Fanuc 21i-TB control unit. This machine can perform with a spindle speed up to 3500 rpm. Y axis...
Lathes - general
Doosan Puma 230MB Doosan Puma 230MB
This Doosan Puma 230MB Lathe was built in Korea in the year 2002. It is equipped with a FANUC Series 21i - T control unit. This machine can work with a spindle speed up to 3500 rpm. It includes its manual books. [Ref: KR-TUR-DOO-2002-00001]
Lathes - general
Hyundai Kia SKT15 Hyundai Kia SKT15
This Hyundai Kia SKT15 Lathe was manufactured in the year 2008 in Korea. It is equipped with a CNC FANUC 0i-TC control unit. This 2 axis machine has a record of approximately 3000 working hours. It can perform with a spindle speed up to 6000 rpm....
Lathes - general
Dugard 42 TT Lathe Dugard 42 TT Lathe
This Dugard 42 TT Lathe was made in 2012 in Taiwan. It is equipped with a Mitsubishi M700 control unit. This 2 spindle machine can work with a spindle speed up to 4000/3000 rpm. It includes a barload M06 bar feed as an additional equipment. It has...
Lathes - general
Doosan Puma MX 2500 ST-GL Lathe Doosan Puma MX 2500 ST-GL Lathe
This Doosan Puma MX 2500 ST-GL Lathe was built in Korea in the year 2007. It has 13600 hours of cutting time. It is equipped with a Fanuc 18i-TB control unit. This machine can work with a spindle speed up to 5000 rpm. Spindle bearing and...
Lathes - general
CMZ TA20M Z640 CMZ TA20M Z640
This CMZ TA20M Z640 Lathe was manufactured in the year 2019 and bought on July 2020. It has been on for 1700 hours and it just has 500 cutting hours. It is operated through a Fanuc 32i Model B control unit. This 2 axis machine can work with a...
Lathes - general
Doosan Puma Inverturn 3000M Turning Doosan Puma Inverturn 3000M Turning
This Doosan Puma Inverturn 3000M Turning Machine was manufactured in 2007 in South Korea. This 4 controlled axes machine has 24321 working hours. The machine can work with a spindle speed up to 3300 rpm. It is in very good conditions and has low...
Lathes - general
Hyundai Wia HD 2200 MC Hyundai Wia HD 2200 MC
This Hyundai Wia HD 2200 MC lathe was manufactured in 2018. This 3 axis machine runs through a HYUNDAI WIA FANUC i Series control unit. It has a spindle speed up to 3500 rpm. It has a production record of 3158 hours, of which 921 are cutting hours....
Lathes - general
Mazak QTN - 250 Mazak QTN - 250
This Mazak QTN - 250 lathe machine was built in 2005 in Japan. It has a total 66164 hours. This 2 axis machine is operated through a Mazatrol control unit. It has a spindle speed up to 4000 rpm. This machine has been regularly serviced and...
Lathes - general
Traub TNX 65 lathe Traub TNX 65 lathe
This Traub TNX 65 lathe was manufactured in 2006 in Germany. It has 27120 working hours. The 3 axis machine has a spindle speed up to 5000 rpm. It is operated through a Traub control unit. [Ref: DE-TUR-TRA-2006-00001]
Lathes - general
TSUGAMI BO38TE lathe machine TSUGAMI BO38TE lathe machine
This TSUGAMI BO38TE lathe machine was manufactured in 2016 in Japan. The machine has a total of 30293 power on hours. It is operated through a FANUC 31-iB control unit. It has a spindle speed up to 5000 rpm. It has numerous additional equipment. ...
Lathes - general
HANKOOK VTB-160 lathe machine HANKOOK VTB-160 lathe machine
This HANKOOK VTB-160 lathe machine was manufactured in 2006. This 2 axis machine is operated through a Fanuc 18-iTB control unit. Its max. table speed is 280 rpm and its max. cutting force is 3000 KGF. It is in very good condition and it was factory...
Lathes - general
Gildemeister CTX-500 E lathe machine Gildemeister CTX-500 E lathe machine
This Gildemeister CTX-500 E lathe machine was manufactured in Germany in 1998. It has a total of 60000 production hours. It is operated through a Heidenhain CNC Pilot control unit. The machine has a spindle speed up to 3600 rpm. It is well...
Lathes - general
Hyundai Wia L150SY lathe Hyundai Wia L150SY lathe
This Hyundai Wia L150SY lathe machine was manufactured in 2016 in South Korea. It has a total of 734 production hours. It operates through a Fanuc Seires 311 control unit. It has a double-spindle lathe and it reaches a spindle speed of 6000 rpm....
Lathes - general
AMADA A-18S Turning AMADA A-18S Turning
This AMADA A-18S lathe machine was manufactured in 2014. The machine has 16358 working hours, of which 1839 are running hours and 1372 are cutting hours. It is operated through a FANUC 0i-TD control unit. This 4 axis machine has a spindle speed up...
Lathes - general
Tornos Multideco 20/6 Turning Tornos Multideco 20/6 Turning
This Tornos Multideco 20/6 Lathe Machine was built in Switzerland in the year 2003. It has 76058 hours of production hours. It is equipped with a Fanuc 16i control unit. This 18 axis machine can work with a spindle speed up to 5000 rpm. The machine...
Lathes - general
Gildemeister NEF CT 40 Lathe Gildemeister NEF CT 40 Lathe
This Gildemeister NEF CT 40 Lathe was manufactured in 1994 in Germany. It has been working for 66634 hours. It is operated through a Messa control unit. This 2 axis machine installed new spindel motor 7.5kw. [Ref: LT-TUR-GIL-1994-00001]
Lathes - general
Titan SC 33 CNC Lathe Titan SC 33 CNC Lathe
This Titan SC 33 CNC Lathe was built in the year 2000. It is equipped with a Siemens 840 C control unit. This 2 axis machine incorporates a table diameter 3000 mm, a max. turning diameter 3300 mm, and a table turning speed 1-150 rpm. It presents...
Lathes - general
Index ABC Lathe Index ABC Lathe
This Index ABC Lathe was manufactured in Germany in the year 2000. It is equipped with a SIEMENS SINUMERIK C200 control unit. This 2 spindle machine can perform with a spindle speed up to 6000 rpm. It includes a Iemca bar loader for 3 meter bars and...
Lathes - general
Doosan PUMA TT2000S-GL Doosan PUMA TT2000S-GL
This Doosan PUMA TT2000S-GL Lathe machine was built in the year 2008 in Korea. It is operated through a FANUC Series 18i-TB control unit. This machine can work with a spindle speed up to 5000 rpm. It includes its manual books and several accesories...
Lathes - general
Mazak INTEGREX 200-IIIS Mazak INTEGREX 200-IIIS
This Mazak INTEGREX 200-IIIS Lathe was built in Japan in the year 2003. It is equipped with a MAZATROL 640 MT Pro control unit. This 6 axis machine can work with a spindle speed up to 4000 rpm and a subspindle speed up to 5000 rpm. It includes...
Lathes - general
MILLTRONICS SL8-II lathe MILLTRONICS SL8-II lathe
This MILLTRONICS SL8-II lathe was made in the year 2019 in the United States. It has been on for 499 hours, of which only 10 hours are cutting time. It is equipped with a Milltronics 9000 CNC control unit. This machine works with a spindle speed up...
Lathes - general
Muratec MV120 Muratec MV120
This Muratec MV120 lathe machine was manufactured in Japan in the year 2008. This machine works through a Fanuc F0iTB control unit. It can work with a spindle speed range 40 - 4000 rpm. It has a total of 6000 production hours. This lathe machine is...
Lathes - general
Mazak QUICK TURN 20 Mazak QUICK TURN 20
This Mazak QUICK TURN 20 Lathe was built in 1998. It is operated through a MAZATROL T PLUS control unit. This 2 axis machine incorporates 1 turret and works with a spindle speed up to 3600 rpm. [Ref: ES-TUR-MAZ-1998-00001]
Lathes - general
Johnford SL-40 Johnford SL-40
This Johnford SL-40 Lathe was manufactured in Taiwan in the year 2017. It has been operative for 16217 hours, of which 7009 are cutting hours and 10726 are running hours. This machine works through a FANUC Series control unit. It can work with a...
Lathes - general
Doosan PUMA GT3100L Doosan PUMA GT3100L
This Doosan PUMA GT3100L Lathe was built in Korea in the year 2018. It operates through a Doosan Fanuc i Series control unit. This 2 axis machine can work with a spindle speed up to 2800 rpm. [Ref: ES-TUR-DOO-2018-00001]
Lathes - general
Pittler PV 1000 lathe Pittler PV 1000 lathe
This Pittler PV 1000 lathe machine was built in the year 2004 in Germany. The machine has 65305 working hours. It is operated through a Siemens 840 control unit. This machine has a spindle speed up to 800 rpm and works through a Capto C8 tool...
Lathes - general
Schütte SF81 Schütte SF81
This Schütte SF81 Lathe was built in Germany in 1988 and retrofitted in 2018. This 6 spindle machine works with a spindle passage 81 mm. It includes a cooling pump. [Ref: SK-TUR-SCH-1988-00001]
Lathes - general
Samsung PL 80 LM Samsung PL 80 LM
This Samsung PL 80 LM Lathe was manufactured in the year 2015 in South Korea. It has been working for 37861 hours, of which 4530 are cutting hours and 2979 are running time. This 3 axis machine is equipped with a FANUC 0i-TD control unit. It works...
Lathes - general
Samsung PL 60 LM Samsung PL 60 LM
This Samsung PL 60 LM Lathe was built in South Korea in 2014. It has a record of 46802 hours, of which 6318 are cutting time and 1320 are running hours. This 3 axis machine is equipped with a FANUC Series oi-TD control unit. This lathe can work with...
Lathes - general
Mazak INTEGREX 35 Mazak INTEGREX 35
This Mazak INTEGREX 35 Lathe was manufactured in 1997 in Japan. It is operated through a MAZATROL T PLUS control unit. This machine works with a spindle speed range 35-3300 rpm and a turning length 1527 mm. It is in very good working conditions,...
Lathes - general
Hyundai Wia L230LMSA Hyundai Wia L230LMSA
This Hyundai Wia L230LMSA Lathe was manufactured in South Korea in 2017. This 5 axis machine is operated by a HYUNDAI WIA FANUC i Series control unit. It works with a spindle speed up to 4000 rpm and a turning length 521 mm. This machine is in very...
Lathes - general
Takamaz XD-8 Plus Takamaz XD-8 Plus
This Takamaz XD-8 Plus Lathe was built in Japan in 2011. It has been on for 20985 hours, of which 8406 are cutting hours. It is equipped with a Fanuc Series 0i-TC control unit. This 2 axis machine can work with a spindle speed up to 4500 rpm. It...
Lathes - general
DAEWOO PUMA 400 DAEWOO PUMA 400
This DAEWOO PUMA 400 Lathe was built in the year 2002. It is operated through a FANUC Series 18i-T control unit. This 2 axis machine incorporates a spindle speed up to 2000 rpm and a turning length 1050 mm. It includes an hydraulic bi-directional...
Lathes - general
MORI SEIKI NT4200 DCG MORI SEIKI NT4200 DCG
This MORI SEIKI NT4200 DCG Lathe was manufactured in Japan in the year 2007. This machine is capable of working with the main spindle speed and the sub spindle speed up to 5000 rpm. It is a very well kept machine that comes with sub turret. [Ref:...
Lathes - general
TOS SUA 80 / 3500 TOS SUA 80 / 3500
This TOS SUA 80 / 3500 Lathe was manufactured in 2000 in Czech Republic. It is equipped with a FAGOR control unit. This machine operates with a spindle speed range 5-1250 rpm and a turning length 3500 mm. It is in very good working condition and...
Lathes - general
HAAS TL-2 HAAS TL-2
This HAAS TL-2 Lathe was built in the United States in 2019. It has a record of only 411 power on hours. This 2 axis machine is operated through a control unit of the same brand. It works with a spindle speed up to 1800 rpm and a bar hole 58 mm....
Lathes - general
KOVOSVIT SP 180 SMC Lathe KOVOSVIT SP 180 SMC Lathe
This KOVOSVIT SP 180 SMC Lathe was built in the year 2011. It has been working for 14164 hours, of which 2915 are spindle hours. This 3 axis machine is equipped with a Fanuc Series 31i. This 2 spindle machine can operate with a spindle speed up to...
Lathes - general
Mazak INTEGREX 200 SY Mazak INTEGREX 200 SY
This Mazak INTEGREX 200 SY Lathe from Japan was made in 2002. It is operated through a MAZATROL FUSION 640 control unit. This 4 axis machine incorporates a main spindle speed up to 4000 rpm. [Ref: IT-TUR-MAZ-2002-00001]
Lathes - general
Hyundai Wia L200Y Lathe Hyundai Wia L200Y Lathe
This Hyundai Wia L200Y Lathe was manufactured in the year 2013 in Korea. It is operated through a FANUC Series 32i-Model A control unit. This 4 axis machine works with a spindle speed up to 4000 rpm. This machine is in very good working condition...
Lathes - general
YOU JI YH-36+C/300 Lathe YOU JI YH-36+C/300 Lathe
This YOU JI YH-36+C/300 Lathe was built in Taiwan in 2014. It has been working for 1400 hours. This 3 axis machine equipped with a FANUC Series Oi - TD control unit. It can work with a spindle speed up to 1500 rpm. This machines includes hydraulic...
Lathes - general
HANKOOK PROTEC-9NC Lathe HANKOOK PROTEC-9NC Lathe
This HANKOOK PROTEC-9NC Lathe was made in Korea in the year 2012. It has a production history of 13500 hours. This 2 axis machine operated through a FANUC Series 32i - MODEL A control unit. It can work with a spindle speed up to 600 rpm. This...
Lathes - general
YOU JI YH-36/135 Lathe YOU JI YH-36/135 Lathe
This YOU JI YH-36/135 Lathe was manufactured in Taiwan in 2012. It has been working for 15000 hours. This 2 axis machine operated through a FANUC Series Oi - TD control unit. It can work with a spindle speed up to 1500 rpm. This machines includes...
Lathes - general
Victor Vturn - 46 Lathe Victor Vturn - 46 Lathe
This Victor Vturn - 46 Lathe was manufactured in Taiwan in the year 2008. It has a production record of 11000 hours. This 2 axis machine operated through a FANUC Series Oi - TC control unit. It can work with a spindle speed up to 1500 rpm. [Ref:...
Lathes - general
YOU JI YH 50/300 Lathe YOU JI YH 50/300 Lathe
This YOU JI YH 50/300 Lathe was built in Taiwan in 2014. It has approximately 4000 working hours. This 2 axis machine is equipped with a FANUC Series Oi - TD control unit. It can work with a spindle speed up to 1500 rpm. [Ref:...
Lathes - general
Mazak Quick Turn Smart 100 S Mazak Quick Turn Smart 100 S
This Mazak Quick Turn Smart 100 S lathe was manufactured in 2011. This 2 axis is equipped with a MAZATROL smart control unit. This machine works with a spindle speed up to 6000 rpm and a machining diameter 280 mm. It is in very good conditions. ...
Lathes - general
HARDINGE Elite 42 Lathes HARDINGE Elite 42 Lathes
This HARDINGE Elite 42 Lathe machine was manufactured in 2015. It is equipped with a Fanuc control unit, and it can work with a 42 mm spindle inner diameter collet chuck. It has a programmable counter tailstock. This is an exhibition machine. ...
Lathes - general
Index G200 Lathe Index G200 Lathe
This Index G200 Lathe was manufactured in the year 2001. It operated through a Siemens 840C control unit. This 10 axis machine can work with a spindle speed up to 5000 rpm. It includes 2 turrets and 2 spindles. [Ref: IN-TUR-IND-2001-00001]
Lathes - general
Okuma LT2000 EX Okuma LT2000 EX
This Okuma LT2000 EX Lathe was made in the year 2012 in Japan. It is equipped with a OKUMA OSP-P200LA control unit. This machine can work with a spindle speed up to 6000 rpm and a spindle bore 62 mm. It have a loading and unloading feeder for full...
Lathes - general
Gildemeister CTX 310 V3 Gildemeister CTX 310 V3
This Gildemeister CTX 310 V3 lathe machine was made in 2003 in Germany. This machine has 25237 working hours, of which 9240 are spindle hours. It is operated through a HEIDENHAIN CNC Pilot 4290 control unit. This 3 axis machine has a spindle speed...
Lathes - general
AJAX EVOLUTION AJEV 310 AJAX EVOLUTION AJEV 310
This AJAX EVOLUTION AJEV 310 Lathe was manufactured in the year 2014 in the United Kingdom. It is operated through a FANUC Series Oi Mate-TD control unit. This 2 axis machine works with a spindle speed up to 2500 rpm and a hydraulic chuck 310 mm. It...
Lathes - general
MORI SEIKI SL-250 BMY MORI SEIKI SL-250 BMY
This MORI SEIKI SL-250 BMY lathe from the year 1997 was manufactured in Japan. It is equipped with a MORI SEIKI MSC-518 control unit. This machine works with a spindle speed up to 3500 rpm. [Ref: FI-TUR-MOR-1997-00001]
Lathes - general
SMEC PL 800VM RH SMEC PL 800VM RH
This SMEC PL 800VM RH Vertical Lathe was made in the year 2015. This machine is equipped with a FANUC control unit. It can work with a spindle speed up to 2000 rpm and a turning diameter 830 mm. It includes its manual books. [Ref:...
Lathes - general
Doosan Puma VT750M Doosan Puma VT750M
This Doosan Puma VT750M Lathe was manufactured in the year 2012. This machine counts with a production record of 42667 hours, of which 5903 are running time and 3620 are cutting hours. It is operated through a DOOSAN - FANUC i Series control unit....
Lathes - general
FRORIEP 6KZ 200 FRORIEP 6KZ 200
This FRORIEP 6KZ 200 Lathe was retrofitted in 2009. This machine is operated through a SIEMENS 840D control unit. It works with a cutting diameter 2100 mm and a cutting height 1400 mm. The machine is in good conditions. [Ref: CZ-TUR-FRO-2009-00001]
Lathes - general
Doosan PUMA VT900M Vertical Lathe Doosan PUMA VT900M Vertical Lathe
This Doosan PUMA VT900M Vertical Lathe machine was manufactured in the year 2010. It is equipped with a Fanuc i Series control unit. The machine has a spindle speed up to 1800 rpm. It has a new 24 inch chuck. [Ref: KR-TUR-DOO-2010-00003]
Lathes - general
ESSEY JAGUAR 2280 ESSEY JAGUAR 2280
This JESSEY JAGUAR 2280 Lathe was manufactured in the year 2016 in Taiwan. It is equipped with a FAGOR 8055 i/A TC control unit. This 2 axis machine can work with a spindle speed range 26-2400 rpm and a spindle bore 80 mm. It includes several...
Lathes - general
Victor V Turn MP Victor V Turn MP
This Victor V Turn MP Lathe was manufactured in 2018 in Taiwan. It has a record of 6138 working hours, of which 2698 are running time and 945 are machining hours. This machine is equipped with a FANUC Series Oi-TF control unit. It can operate with a...
Lathes - general
Takamaz XL100 Takamaz XL100
This Takamaz XL100 Lathe was made in Japan in 2014. It has been operative for 19445 hours, of which 15222 are running time, 8873 are free usage time and 6761 are machining hours. This machine is operated through a FANUC Series Oi-TD control unit. It...
Lathes - general
Okuma LB3000ll EX MC 1000 Okuma LB3000ll EX MC 1000
This Okuma LB3000ll EX MC 1000 Lathe was made in the year 2014 in Japan. This machine has 21010 production hours, of which 11219 are running time, 10325 are spindle hours and 9512 are machining time. It is operated through a 15'' colour 3D LCD OKUMA...
Lathes - general
Okuma GENOS L200E-MY Okuma GENOS L200E-MY
This Okuma GENOS L200E-MY Lathe was built in Taiwan in 2014. It has a production record of 23768 hours, of which 13225 are running time, 9657 are spindle hours and 9517 are machining time. It is equipped with an OKUMA OSP-P300L-R control unit. This...
Lathes - general
HWACHEON CUTEX 160B MC HWACHEON CUTEX 160B MC
This HWACHEON CUTEX 160B MC Lathe was manufactured in 2013 in Korea. It has 25948 production hours, of which 8550 are running time and 5525 are machining time. This machine is operated through a FANUC Series 0i-TD control unit. It works with a...
Lathes - general
Doosan Puma MX 2500  Multitasking Lathe Doosan Puma MX 2500 Multitasking Lathe
This Doosan Puma MX 2500 Multitasking Lathe was manufactured in the year 2007 in Korea. It is operated through a Fanuc Series 18i - TB control unit. This machine works with a max speed tool rotation 10000 rpm, and a max length 1020 mm. [Ref:...
Lathes - general
imt VBM 25.32 imt VBM 25.32
This imt VBM 25.32 lathe was manufactured in 2009. This machine is operated through a SIEMENS SINUMERIK 840D control unit. It works with a spindle speed up to 3000 rpm and a turning diameter 3200 mm. This machine is in good condition, on average...
Lathes - general
Index G200 Index G200
This Index G200 Lathe was manufactured in 2002 in Germany. It is equipped with a SIEMENS SINUMERIK control unit. This machine stands out for its spindle speed up to 5000 rpm and a material passage 60 mm. [Ref: DE-TUR-IND-2002-00004]
Lathes - general
Mazak Integrex 400-II Y Mazak Integrex 400-II Y
This Mazak Integrex 400-II Y multitasking center was manufactured in 2003. This 5 axis machine is operated through a PC Fusion 640 MT control unit. It has a milling spindle speed up to 10000 rpm and a workable length 1516 mm. It comes with a...
Lathes - general
Lealde TCN-10 Lealde TCN-10
This Lealde TCN-10 Lathe from 2002 was built in Spain. It is equipped with a SIEMENS 810D control unit. This 2 axis machine can work with a spindle speed up to 4000 rpm and a hole diameter 75 mm. [Ref: ES-TUR-LEA-2002-00001]
Lathes - general
EMCO EMCOTURN 342 EMCO EMCOTURN 342
This EMCO EMCOTURN 342 Lathe was made in 1993 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. This machine stands out due to its spindle speed range 0-6000 rpm and its spindle bore 53 mm. [Ref: HU-TUR-EMC-1993-00001]
Lathes - general
EMAG VSC 500 EMAG VSC 500
This EMAG VSC 500 Lathe were manufactured in 1998. It is operated with a control unit SIEMENS Sinumerik 840 D with 14'' display. This 2 axis machine can work with a spindle speed up to 3400 rpm and a swing diameter 520 mm. [Ref:...
Lathes - general
Doosan Puma TT1800SY Doosan Puma TT1800SY
This Doosan Puma TT1800SY Lathe was manufactured in the year 2006. It is equipped with a FANUC Series 18i-TB control unit. This 4 axis machine works with a spindle speed up to 5000 rpm and a turning diameter 230 mm. It has C and Y axes, plus 2...
Lathes - general
DMG Mori Seiki NTX2000/1500S DMG Mori Seiki NTX2000/1500S
This DMG Mori Seiki NTX2000/1500S Lathe was manufactured in the year 2012 in Japan. It is operated through a MORI SEIKI FS-31iB5 control unit. This 6 axis machine works with a spindle speed up to 5000 rpm and a mill turn spindle speed up to 1200...
Lathes - general
HARRISON M250 CENTRE LATHE HARRISON M250 CENTRE LATHE
500mm between centres, 145mm centre height, 280mm swing over bed, 35mm bore, speeds 40-1500rpm, 3 jaw chuck, QCTP & holders, coolant
Lathes - general
HARRISON M250 STRAIGHT BED CENTRE LATHE HARRISON M250 STRAIGHT BED CENTRE LATHE
500mm between centres, 145mm centre height, 280mm swing over bed, 35mm bore, speeds 40-1500rpm, 3 jaw chuck, QCTP & holders, coolant
Lathes - general
HARRISON M300 GAP BED CENTRE LATHE HARRISON M300 GAP BED CENTRE LATHE
1m between centres, 167mm centre height, 330mm swing over bed, 38mm bore, speeds 40-2500mm, 2.2kw motor, QCTP & holders, 3 & 4 jaw chucks, bedstop, coolant
Lathes - general
Poreba TCG 160V-18m Poreba TCG 160V-18m
Make: poreba Type: heavy-duty-roll-lath Model: TCG 160V 18m Machine number: 1173-29 Centre distance (mm): 18000 Max swing over bed (mm): 2000 Max swing over cross slide (mm): 1290 Spindle bore (mm): 105 R.P.M.: 0.8 - 160 (24x) kW:...
Lathes - general
Poreba TCG 160 Poreba TCG 160
Make: poreba Type: heavy-duty-roll-lath Model: TCG 160 4m Centre distance (mm): 4000 Max swing over bed (mm): 1600 Max swing over cross slide (mm): 1290 Spindle bore (mm): 105 R.P.M.: 0.8 - 160 (24x) kW: 75 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Fukuno Seiki 2680 Fukuno Seiki 2680
Year of Manufacture: 2001 Make: fukuno Type: cnc-lathe Model: Seiki 2680 Machine number: Fagor 8050 Centre distance (mm): 2000 Max swing over bed (mm): 660 Max swing over cross slide (mm): 370 Spindle bore (mm): 104 R.P.M.: 25 - 1200 kW:...
Lathes - general
Poreba TCG 160 10M Poreba TCG 160 10M
Make: poreba Type: heavy-duty-roll-lath Model: TCG 160 Machine number: 1173-102 Control: Sony 2-Axis D.R.O. Centre distance (mm): 10000 Max swing over bed (mm): 1690 Max swing over cross slide (mm): 1290 Spindle bore (mm): 105 R.P.M.: 1,6 -...
Lathes - general
Mondiale M.N.C. 40 / 355 Mondiale M.N.C. 40 / 355
Make: mondiale Type: oil-country Model: MNC 40-355 Control: Fanuc/Siemens/Fagor/Heidenhain Centre distance (mm): 2000 - 6000 Max swing over bed (mm): 1020 Max swing over cross slide (mm): 650 R.P.M.: 10 - 1200 kW: 22 / 33 Volts:...
Lathes - general
Rafamet UCB 125 Rafamet UCB 125
Year of Manufacture: 1980 Make: rafamet Type: railway Model: UCB 125 Machine number: 17508 Centre distance (mm): 2700 Max. Wheel diameter: 1435 Maximum Axle length: 2660 Max. Wheel width: 150 Diameter range: ؈… 700 - 1250 R.P.M.: 7,2 -...
Lathes - general
Sculfort Supercap-Senior Sculfort Supercap-Senior
Make: sculfort Type: conventia Model: Supercap-Senior Machine number: 128605 Centre distance (mm): 3000 Max swing over bed (mm): 1500 Max swing over cross slide (mm): 1250 Spindle bore (mm): 260 R.P.M.: 12.5 - 1000 (24x) kW: 20 / 10 [Ref:...
Lathes - general
Mondiale Arctic 800 CNC Mondiale Arctic 800 CNC
Year of Manufacture: new Make: mondiale Type: cnc-oil-country Model: Arctic 800 CNC Control: Fanuc 21 i Control Centre distance (mm): 4000 Max swing over bed (mm): 800 Max swing over cross slide (mm): 510 Spindle bore (mm): 380 R.P.M.:...
Lathes - general
ZMM C13 ZMM C13
Make: zmm Type: conventia Model: C13 6M Centre distance (mm): 6000 Max swing over bed (mm): 800 Max swing over cross slide (mm): 540 Max swing in gap (mm): 1050 Spindle bore (mm): 136 R.P.M.: 6.3 - 850 (24x) kW: 18 Volts: 380v Cycles:...
Lathes - general
Poreba TPK 80 Poreba TPK 80
Make: poreba Type: conventia Model: TPK 80 Machine number: 1179-111 Centre distance (mm): 3500 Max swing over bed (mm): 800 Max swing over cross slide (mm): 540 Max swing in gap (mm): 1100 Spindle bore (mm): 95 R.P.M.: 6 - 630 kW:...
Lathes - general
Oerlikon DM4A Oerlikon DM4A
Make: oerlikon Type: conventia Model: DM4A Machine number: 247099 Centre distance (mm): 6300 Max swing over bed (mm): 1000 Max swing over cross slide (mm): 640 Max swing in gap (mm): 1250 Spindle bore (mm): 50 R.P.M.: 6-925 HP: 22 Volts:...
Lathes - general
Safop Leonard 60/TT Safop Leonard 60/TT
Make: safop Type: cnc Model: Leonard 60/TT Control: Siemens 880T Centre distance (mm): 6000 Max swing over bed (mm): 2400 Max swing over cross slide (mm): 1400 Spindle bore (mm): 320 R.P.M.: 0.4 - 1000 kW: 51/56, 76/95 Volts: 380v Cycles:...
Lathes - general
MFD Hoesch D-1000-GY-YF MFD Hoesch D-1000-GY-YF
Make: mfd-hoesch Type: roll-lathe Model: D-1000-GY-YF Machine number: 240-14430 Centre distance (mm): 7000 Max swing over bed (mm): 2000 Max swing over cross slide (mm): 1050 R.P.M.: 1,6 - 250 kW: 147 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Sculfort NN Sculfort NN
Make: sculfort Type: conventia Centre distance (mm): 3000 Max swing over bed (mm): 1020 Max swing over cross slide (mm): 600 Max swing in gap (mm): 1420 Spindle bore (mm): 84 R.P.M.: 5-800 (48x) kW: 20/40 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Heyligenstaedt 500 EN 800 Heyligenstaedt 500 EN 800
Make: heyligenstaedt Type: conventia Model: 500 EN 8000 Centre distance (mm): 8000 Max swing over bed (mm): 1050 Max swing over cross slide (mm): 730 Max swing in gap (mm): 1200 Spindle bore (mm): 100 R.P.M.: 1.7 - 355 kW: 37 Volts:...
Lathes - general
Binns and Berry Tangram Binns and Berry Tangram
Make: binns-berry Type: modular Model: Tangram Centre distance (mm): 7500 Max swing over bed (mm): 4000 R.P.M.: 0 - 750 [Ref: modular-lathe-binns-and-berry-tangram]
Lathes - general
Poreba TPK 90 Poreba TPK 90
Make: poreba Type: conventia Model: TPK 90 Centre distance (mm): 6000 Max swing over bed (mm): 930 Max swing over cross slide (mm): 630 Max swing in gap (mm): 1250 Spindle bore (mm): 95 R.P.M.: 8 - 800 (24x) kW: 22 [Ref:...
Lathes - general
Niles DP2S3 Niles DP2S3
Make: niles Type: heavy-duty-roll-lath Model: DP2 S3 Centre distance (mm): 7500 Max swing over bed (mm): 1650 Max swing over cross slide (mm): 1200 Max swing in gap (mm): 2500 Spindle bore (mm): 105 R.P.M.: 3.55 - 180 (24x) kW: 45 Volts:...
Lathes - general
WMW Niles DP4000 DP5000 WMW Niles DP4000 DP5000
Make: wmv-niles Type: modular Model: DP4000 DP5000 Centre distance (mm): 5000 Max swing over bed (mm): 4000 Max swing in gap (mm): 5000 R.P.M.: 1.4 - 71 (18x) kW: 30 Volts: 380v Cycles: 50 [Ref: modular-lathe-wmw-niles-dp400-dp5000]
Lathes - general
Weisser Heilbronn Gigant Weisser Heilbronn Gigant
Make: weisser-heilbronn Type: modular Model: Gigant Centre distance (mm): 10500 Max swing over bed (mm): 3600 Spindle bore (mm): 180 R.P.M.: 3,5 - 180 (18x) kW: 22 Volts: 380v Cycles: 50 [Ref: modular-lathe-weisser-heilbronn-gigant-11-361c]
Lathes - general
Merli Clovis 50 Merli Clovis 50
Year of Manufacture: 1995 Make: merli-clovis Type: conventia Model: 50 Machine number: 750305 Centre distance (mm): 10000 Max swing over bed (mm): 1050 Max swing over cross slide (mm): 640 Max swing in gap (mm): 1310 Spindle bore (mm):...
Lathes - general
Mondiale Arctic 970 SL CNC Mondiale Arctic 970 SL CNC
Year of Manufacture: new Type: cnc-oil-country Model: SC6020 Control: Fanuc OiTD Centre distance (mm): 2200 Max swing over bed (mm): 970 Max swing over cross slide (mm): 720 Spindle bore (mm): 230 Diameter range: 850 R.P.M.: 500 kW:...
Lathes - general
Poreba TPK80 Poreba TPK80
Make: poreba Type: conventia Model: TPK 80 8M Machine number: 1179-825 Centre distance (mm): 8000 Max swing over bed (mm): 800 Max swing over cross slide (mm): 530 Max swing in gap (mm): 1080 Spindle bore (mm): 95 R.P.M.: 8-800 (21x) kW:...
Lathes - general
Wohlenberg PT1 U1070 S111 Wohlenberg PT1 U1070 S111
Make: wohlenberg Type: cnc-lathe Model: PT1 U1070 S111 Machine number: D4329 Control: Alan Bradley 9-series Centre distance (mm): 8500 Max swing over bed (mm): 1070 Max swing over cross slide (mm): 800 Spindle bore (mm): 130 R.P.M.: 1,12 -...
Lathes - general
Breda BRF250 Breda BRF250
Make: breda Type: conventia Model: BRF 250 Centre distance (mm): 2000 Max swing over bed (mm): 500 Max swing over cross slide (mm): 310 Spindle bore (mm): 60 R.P.M.: 12,5 -1800 kW: 3 Volts: 400v Cycles: 50 [Ref: breda-brf250-11-938c1]
Lathes - general
Padovani Labor E300 Padovani Labor E300
Make: padovani Type: teach-in Model: LABOR E300 Control: Siemens 805 Centre distance (mm): 4000 Max swing over bed (mm): 720 Max swing over cross slide (mm): 360 Spindle bore (mm): 100 R.P.M.: 15 - 1200 kW: 22 Volts: 380v Cycles:...
Lathes - general
SMT Swedturn18 SMT Swedturn18
Make: smt Type: cnc-lathe Model: Swedturn 18 Machine number: 36/595093/23 Control: CNC 300 Centre distance (mm): 2250 Max swing over bed (mm): 720 Max swing over cross slide (mm): 480 Spindle bore (mm): 110 R.P.M.: 125 - 1500 kW:...
Lathes - general
Mondiale Gallic 420CNC Mondiale Gallic 420CNC
Make: mondiale Type: cnc-lathe Model: Gallic 420 CNC Control: AMK 2002 Centre distance (mm): 870 Max swing over bed (mm): 420 Max swing over cross slide (mm): 214 Spindle bore (mm): 69 R.P.M.: 45 - 2500 (inf.var.) kW: 11 Volts:...
Lathes - general
Oerlikon DM4S 550 Oerlikon DM4S 550
Make: oerlikon Type: conventia Model: DM4S 550/720 Centre distance (mm): 3200 Max swing over bed (mm): 1140 Max swing over cross slide (mm): 810 Max swing in gap (mm): 1350 Spindle bore (mm): 62 R.P.M.: 6 - 660 (30x) HP: 22 Volts:...
Lathes - general
VDF Boehringer DUE 560 VDF Boehringer DUE 560
Year of Manufacture: 1991 Make: vdf-boehringer Type: conventia Model: DUE 560 Centre distance (mm): 2500 Max swing over bed (mm): 560 Max swing over cross slide (mm): 370 Spindle bore (mm): 62 R.P.M.: 1,12 - 2240 (24x) Volts: 380v Cycles:...
Lathes - general
Mondiale Gallic 420CNC Mondiale Gallic 420CNC
Make: mondiale Type: cnc-lathe Model: Gallic 420 CNC Control: Fanuc 10TF Centre distance (mm): 870 Max swing over bed (mm): 420 Max swing over cross slide (mm): 214 Spindle bore (mm): 69 R.P.M.: 45 - 2500 (inf.var.) kW: 11 Volts:...
Lathes - general
Mondiale Gallic 420CNC Mondiale Gallic 420CNC
Make: mondiale Type: cnc-lathe Model: Gallic 420 CNC Control: Fanuc 10TF Centre distance (mm): 870 Max swing over bed (mm): 420 Max swing over cross slide (mm): 214 Spindle bore (mm): 69 R.P.M.: 45 - 2500 (inf.var.) kW: 11 Volts:...
Lathes - general
Cazeneuve HBCN S575 Cazeneuve HBCN S575
Year of Manufacture: 1995 Make: cazeneuve Type: teach-in Model: HBCN S575 Machine number: 9810 Control: SOMAB PL+S3 Centre distance (mm): 1500 Max swing over bed (mm): 575 Max swing over cross slide (mm): 525 Spindle bore (mm): 51 R.P.M.:...
Lathes - general
Mondiale Gallic 16N Mondiale Gallic 16N
Make: mondiale Type: conventia Model: Gallic 16N Centre distance (mm): 1500 Max swing over bed (mm): 415 Max swing over cross slide (mm): 224 Spindle bore (mm): 69 R.P.M.: 40 - 2000 (15x) HP: 7,5 Volts: 400v Cycles: 50 3-Jaw chuck Ø (mm):...
Lathes - general
Mondiale Gallic 20 Mondiale Gallic 20
Make: mondiale Type: conventia Model: Gallic 20 Centre distance (mm): 1500 Max swing over bed (mm): 520 Max swing over cross slide (mm): 290 Spindle bore (mm): 57,5 R.P.M.: 33 - 2000 (16x) HP: 10 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Mondiale New Celtic 14 Mondiale New Celtic 14
Make: mondiale Type: conventia Model: New Celtic 14 Centre distance (mm): 750 Max swing over bed (mm): 370 Max swing over cross slide (mm): 230 Spindle bore (mm): 35 R.P.M.: 38-1600 (16x) HP: 4 Volts: 380v Cycles: 50 3-Jaw chuck Ø (mm):...
Lathes - general
Mondiale New Celtic 14 Mondiale New Celtic 14
Make: mondiale Type: conventia Model: New Celtic 14 Centre distance (mm): 750 Max swing over bed (mm): 370 Max swing over cross slide (mm): 230 Spindle bore (mm): 35 R.P.M.: 38-1600 (16x) HP: 4 Volts: 380v Cycles: 50 3-Jaw chuck Ø (mm):...
Lathes - general
Mondiale New Celtic 14 Mondiale New Celtic 14
Make: mondiale Type: conventia Model: New Celtic 14 Centre distance (mm): 750 Max swing over bed (mm): 370 Max swing over cross slide (mm): 230 Spindle bore (mm): 35 R.P.M.: 38-1600 (16x) HP: 4 Volts: 380v Cycles: 50 3-Jaw chuck Ø (mm):...
Lathes - general
Giana TG410 Giana TG410
Make: giana Type: conventia Model: TG 410 Centre distance (mm): 6000 Max swing over bed (mm): 820 Max swing over cross slide (mm): 570 Spindle bore (mm): 150 R.P.M.: 9 - 1030 (24x) kW: 14 Volts: 380v Cycles: 50 Steady rest Ø (mm):...
Lathes - general
Mondiale M600 Mondiale M600
Make: mondiale Type: cnc-slant-bed-lathe Model: M600 Machine number: CNC60086321AO Control: Fanuc 10TF Centre distance (mm): 1000 Max swing over bed (mm): 600 Max swing over cross slide (mm): 475 Spindle bore (mm): 90 R.P.M.: 31 - 1800 kW:...
Lathes - general
Tacchi FTC100 Tacchi FTC100
Make: tacchi Type: heavy-duty-roll-lath Model: FTC 100 Centre distance (mm): 16000 Max swing over bed (mm): 1800 Max swing over cross slide (mm): 1200 Max swing in gap (mm): 2300 Spindle bore (mm): 150 R.P.M.: 1 - 300 HP: 75 Cycles:...
Lathes - general
Pasquino MP550 Pasquino MP550
Make: pasquino Type: conventia Model: MP 550 Machine number: 21651 Centre distance (mm): 6300 Max swing over bed (mm): 1150 Max swing over cross slide (mm): 800 Max swing in gap (mm): 1500 Spindle bore (mm): 100 R.P.M.: 4 - 800 (24x) kW:...
Lathes - general
Mondiale 960 Mondiale 960
Make: mondiale Type: conventia Model: 960 Machine number: 3005258 Centre distance (mm): 4300 Max swing over bed (mm): 960 Max swing over cross slide (mm): 720 Max swing in gap (mm): 1100 Spindle bore (mm): 153 R.P.M.: 8 - 680 (12x) kW:...
Lathes - general
Mondiale Gallic 510 Mondiale Gallic 510
Year of Manufacture: new Make: mondiale Type: conventia Model: Gallic 510 Centre distance (mm): 1500 Max swing over bed (mm): 510 Max swing over cross slide (mm): 340 Max swing in gap (mm): 760 Spindle bore (mm): 80 R.P.M.: 20 - 1600 kW:...
Lathes - general
Poreba TCG 125/10m Poreba TCG 125/10m
Make: poreba Type: heavy-duty-roll-lath Model: TCG 125 Machine number: 1173-119 Centre distance (mm): 10000 Max swing over bed (mm): 1250 Max swing over cross slide (mm): 940 Spindle bore (mm): 105 R.P.M.: 1,6 - 315 (24x) kW: 75 Volts:...
Lathes - general
Poreba TCF224 Poreba TCF224
Make: poreba Type: cnc-heavy-duty-lathe Model: TCF 224 Control: Siemens Centre distance (mm): 5000 Max swing over bed (mm): 2240 Max swing over cross slide (mm): 1790 Spindle bore (mm): 105 R.P.M.: 0,5 - 250 (16x) kW: 75 / 110 Volts:...
Lathes - general
Monofab 260EA Monofab 260EA
Make: monofab Type: conventia Model: 260 EA Centre distance (mm): 1600 Max swing over bed (mm): 540 Max swing over cross slide (mm): 320 Max swing in gap (mm): 580 Spindle bore (mm): 50 R.P.M.: 18 - 1400 (18x) kW: 5,5 Volts: 380v Cycles:...
Lathes - general
Mondiale Gallic 760CNC Mondiale Gallic 760CNC
Year of Manufacture: new Make: mondiale Type: cnc-lathe Model: Gallic 760 CNC Control: Fanuc 0i-TF Centre distance (mm): 3000 Max swing over bed (mm): 760 Max swing over cross slide (mm): 560 Spindle bore (mm): 155 R.P.M.: 10 - 1400 kW: 15...
Lathes - general
PBR T 500 PBR T 500
Make: pbr Type: conventia Model: T500 Centre distance (mm): 4000 Max swing over bed (mm): 1040 Max swing over cross slide (mm): 700 Max swing in gap (mm): 1300 Spindle bore (mm): 150 R.P.M.: 4-800 Volts: 380v [Ref: pbr-t-500-12-145c0]
Lathes - general
Pinacho SC 325-80 Pinacho SC 325-80
Make: pinacho Type: conventia Model: Sc 325 - 80 Centre distance (mm): 3000 Max swing over bed (mm): 652 Max swing over cross slide (mm): 450 R.P.M.: 30 - 1700 kW: 400 Volts: 380v Cycles: 50 [Ref: pinacho-sc-325-80-12-215cm]
Lathes - general
TACCHI HS1000 TACCHI HS1000
Make: tacchi Type: sliding-bed Model: HS1000 Centre distance (mm): 4500 Max swing over bed (mm): 1000 Max swing over cross slide (mm): 700 Spindle bore (mm): 105 R.P.M.: 80 - 1000 (12X) Volts: 380v Cycles: 50 [Ref: tacchi-hs1000-12-285c1]
Lathes - general
Mondiale Nordic 960 Mondiale Nordic 960
Make: mondiale Type: heavy-duty-roll-lath Model: Nordic 960 Centre distance (mm): 12000 Max swing over bed (mm): 960 Max swing over cross slide (mm): 700 Max swing in gap (mm): 1100 Spindle bore (mm): 153 R.P.M.: 7 - 500 (12x) kW:...
Lathes - general
Poreba TRP110MN Poreba TRP110MN
Make: poreba Type: cnc-lathe Model: TRP110MN 6M Machine number: 7402-19-07008-00 Control: Siemens 840D Max swing over bed (mm): 1100 Max swing over cross slide (mm): 740 Spindle bore (mm): 105 R.P.M.: 16 - 1800 (18x) kW: 22 Volts:...
Lathes - general
Mondiale Nordic 1300 Mondiale Nordic 1300
Make: mondiale Type: heavy-duty-roll-lath Model: Nordic 1300 Centre distance (mm): 8000 Max swing over bed (mm): 1300 Max swing over cross slide (mm): 900 Max swing in gap (mm): 1580 Spindle bore (mm): 153 R.P.M.: 7 - 500 (12x) kW:...
Lathes - general
Mondiale Nordic 760 Mondiale Nordic 760
Year of Manufacture: new Make: mondiale Type: conventia Model: Nordic 760 Machine number: 0223 Centre distance (mm): 4000 Max swing over bed (mm): 760 Max swing over cross slide (mm): 570 Max swing in gap (mm): 960 Spindle bore (mm):...
Lathes - general
Wohlenberg S900B Wohlenberg S900B
Make: wohlenberg Type: heavy-duty-roll-lath Model: S 900B Machine number: 3942-1972 Centre distance (mm): 4000 Max swing over bed (mm): 1340 Max swing over cross slide (mm): 750 Spindle bore (mm): 104 R.P.M.: 1,4 - 280 (24x) kW: 45 Volts:...
Lathes - general
Mondiale New Celtic12 Mondiale New Celtic12
Make: mondiale Type: conventia Model: New Celtic 12 Centre distance (mm): 800 Max swing over bed (mm): 305 Max swing over cross slide (mm): 170 Spindle bore (mm): 28 R.P.M.: 35 - 1500 (16x) kW: 1,46 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Mondiale New Celtic 20 Mondiale New Celtic 20
Make: mondiale Type: conventia Model: New Celtic 20 Centre distance (mm): 2000 Max swing over bed (mm): 500 Max swing over cross slide (mm): 285 Max swing in gap (mm): 760 Spindle bore (mm): 58 R.P.M.: 10 - 800 (18x) HP: 10 Volts:...
Lathes - general
Wohlenberg VM1250 Wohlenberg VM1250
Make: wohlenberg Type: cnc-lathe Model: VM 1250 Machine number: 3992 Control: Heidenhain Manual + 620 Centre distance (mm): 6100 Max swing over bed (mm): 1250 Max swing over cross slide (mm): 1000 Max swing in gap (mm): 128 Spindle bore...
Lathes - general
Mondiale Gallic 450 CNC Mondiale Gallic 450 CNC
Year of Manufacture: new Make: mondiale Type: cnc-lathe Model: Gallic 450 CNC Control: Fagor 8055i Centre distance (mm): 650 Max swing over bed (mm): 446 Max swing over cross slide (mm): 240 Max swing in gap (mm): 546 Spindle bore (mm):...
Lathes - general
Mondiale Gallic 420CNC Mondiale Gallic 420CNC
Make: mondiale Type: cnc-lathe Model: Gallic 420 CNC Control: Fanuc 10TF Centre distance (mm): 870 Max swing over bed (mm): 420 Max swing over cross slide (mm): 214 Spindle bore (mm): 69 R.P.M.: 45 - 2500 (inf.var.) kW: 11 Volts:...
Lathes - general
Mondiale Nordic 25 Mondiale Nordic 25
Make: mondiale Type: conventia Model: Nordic 25 Centre distance (mm): 2500 Max swing over bed (mm): 645 Max swing over cross slide (mm): 400 Spindle bore (mm): 71,5 R.P.M.: 9 - 710 (18x) HP: 10 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Topper TNL-100T Topper TNL-100T
Type: cnc-lathe Model: TNL-100T Machine number: 7440 Control: Fanuc O-T Centre distance (mm): 400 Max swing over bed (mm): 380 Spindle bore (mm): 50 R.P.M.: 1 - 4500 Volts: 380v Cycles: 50 [Ref: topper-tnl-100t-12-508c]
Lathes - general
Matra MD29S Matra MD29S
Type: conventia Model: MD29S Centre distance (mm): 2200 Max swing over bed (mm): 580 Max swing over cross slide (mm): 360 Max swing in gap (mm): 800 Spindle bore (mm): 70 R.P.M.: 11,2 - 2000 (18x) kW: 10 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Pinacho SE 325 Pinacho SE 325
Make: pinacho Type: cnc-lathe Model: SE 325 Control: Siemens 808D Centre distance (mm): 2000 Max swing over bed (mm): 652 Max swing over cross slide (mm): 450 Spindle bore (mm): 80 R.P.M.: 0 - 1700 kW: 7,5 Volts: 380v Cycles: 50 [Ref:...
Lathes - general
Mondiale Nordic 650CNC Mondiale Nordic 650CNC
Year of Manufacture: new Make: mondiale Type: cnc-lathe Model: Nordic650 CNC Control: Siemens 828D Centre distance (mm): 3000 Max swing over bed (mm): 650 Max swing over cross slide (mm): 410 Spindle bore (mm): 106 R.P.M.: 80 - 2400 kW:...
Lathes - general
Hyundai HIT18 Hyundai HIT18
Make: hyundai Type: cnc-lathe Model: HIT 18 Machine number: 34179042 Centre distance (mm): 500 Max swing over bed (mm): 440 Max swing over cross slide (mm): 254 Spindle bore (mm): 70 R.P.M.: 30 - 3600 kW: 15 Volts: 400v Cycles: 50 3-Jaw...
Lathes - general
Mondiale Gallic 16N Mondiale Gallic 16N
Make: mondiale Type: conventia Model: Gallic 16N Machine number: DG16NR79022LO Centre distance (mm): 1500 Max swing over bed (mm): 415 Max swing over cross slide (mm): 224 Spindle bore (mm): 45 R.P.M.: 45 - 2000 (15x) kW: 7,5 Volts:...
Lathes - general
Mondiale Gallic 20 Mondiale Gallic 20
Make: mondiale Type: conventia Model: Gallic 20 Machine number: LG20800731C69 Centre distance (mm): 1500 Max swing over bed (mm): 520 Max swing over cross slide (mm): 290 Spindle bore (mm): 57,5 R.P.M.: 33 - 2000 (16x) HP: 10 Volts:...
Lathes - general
Stanko 1M635 Stanko 1M635
Make: stanko Type: conventia Model: 1M635 Centre distance (mm): 3000 Max swing over bed (mm): 700 Max swing over cross slide (mm): 380 Spindle bore (mm): 76 R.P.M.: 10 - 1250 (16x) kW: 15 Volts: 380v Cycles: 50 3-Jaw chuck Ø (mm):...
Lathes - general
PBR T700 PBR T700
Make: pbr Type: heavy-duty-roll-lath Model: T700 Machine number: 113924 Centre distance (mm): 6000 Max swing over bed (mm): 1420 Max swing over cross slide (mm): 1040 Max swing in gap (mm): 1460 Spindle bore (mm): 150 R.P.M.: 2,5 - 500...
Lathes - general
Wagner D1500-15IV-100 Wagner D1500-15IV-100
Retrofit: 2008 Make: wagner Type: cnc-heavy-duty-lathe Model: D1500-15IV-100 Control: Siemens 840D Centre distance (mm): 21200 Max swing over bed (mm): 3050 Max swing over cross slide (mm): 2500 R.P.M.: 0,236 - 60 kW: 200 Volts:...
Lathes - general
MFD Hoesch D1100 MFD Hoesch D1100
Make: mfd-hoesch Type: cnc-heavy-duty-lathe Model: D1100 Control: Siemens 840C Centre distance (mm): 6.800 Max swing over bed (mm): 2.100 Max swing over cross slide (mm): 1.300 R.P.M.: 1,25 - 40 and 45-175 kW: 140 Volts: 380v Cycles:...
Lathes - general
Poreba TCG 125-4M Poreba TCG 125-4M
Make: poreba Model: TCG 125-4M Centre distance (mm): 4.000 Max swing over bed (mm): 1.250 Max swing over cross slide (mm): 940 Spindle bore (mm): 105 R.P.M.: 1,6 - 315 (24x) kW: 75 Volts: 380v Cycles: 50 [Ref: poreba-tcg-125-4m-11-895c]
Lathes - general
Poreba TCG 125 Poreba TCG 125
Make: poreba Type: heavy-duty-roll-lath Model: TCG 125 Machine number: 1173-021 Centre distance (mm): 6.000 Max swing over bed (mm): 1.250 Max swing over cross slide (mm): 940 Spindle bore (mm): 105 R.P.M.: 1,6 - 315 (24x) kW: 75 Volts:...
Lathes - general
Schaublin 123 Schaublin 123
Make: schaublin Model: 123 Centre distance (mm): 400 Max swing over bed (mm): 160 Spindle bore (mm): 52 kW: 4 Volts: 380v Cycles: 50 [Ref: schaublin-123-12-219c1]
Lathes - general
TOS SU 100 TOS SU 100
Make: tos Model: SU 100 Machine number: 0443563 Centre distance (mm): 8.000 Max swing over bed (mm): 1.050 Max swing over cross slide (mm): 730 Max swing in gap (mm): 1.200 Spindle bore (mm): 102 R.P.M.: 2,24 - 450 (24x) kW: 22 Volts:...
Lathes - general
Poreba TR 135 6m Poreba TR 135 6m
Make: poreba Type: conventia Model: TR 135 Centre distance (mm): 6000 Max swing over bed (mm): 1350 Max swing over cross slide (mm): 1020 Max swing in gap (mm): 1700 Spindle bore (mm): 120 R.P.M.: 5 - 500 (24x) kW: 27 / 41 Volts:...
Lathes - general
VDF Boehringer DUS 1000ti VDF Boehringer DUS 1000ti
Year of Manufacture: 2001 Make: vdf-boehringer Type: teach-in Model: DUS 1000ti Control: Siemens ManualTurn Centre distance (mm): 6000 Max swing over bed (mm): 1020 Max swing over cross slide (mm): 720 Spindle bore (mm): 200 R.P.M.: 5,2 -...
Lathes - general
Heyligenstaedt ND2b-1000III-25x5000 Heyligenstaedt ND2b-1000III-25x5000
Make: heyligenstaedt Type: heavy-duty-roll-lath Model: ND2b-1000III-25x5000 Machine number: 3088 Centre distance (mm): 5000 Max swing over bed (mm): 1980 Max swing over cross slide (mm): 1680 Spindle bore (mm): 120 R.P.M.: 0,9 - 180 kW:...
Lathes - general
Heyligenstaedt NN Heyligenstaedt NN
Make: heyligenstaedt Type: sliding-bed Model: N.N. Centre distance (mm): 4000 Max swing over bed (mm): 1000 Max swing over cross slide (mm): 700 Max swing in gap (mm): 1700 Max length of gap (mm): 1.600 Spindle bore (mm): 95 R.P.M.: 7.1 -...
Lathes - general
VDF Boehringer 315C VDF Boehringer 315C
Year of Manufacture: 1990 Make: vdf-boehringer Type: cnc-lathe Model: 315C Control: Philips B3T Centre distance (mm): 1000 Max swing over bed (mm): 550 / 520 Max swing over cross slide (mm): 480 / 450 Spindle bore (mm): 78 R.P.M.: 22,4 -...
Lathes - general
VDF Boehringer DUE 800 VDF Boehringer DUE 800
Make: vdf-boehringer Type: conventia Model: DUE 800 Centre distance (mm): 5000 Max swing over bed (mm): 820 Max swing over cross slide (mm): 920 Spindle bore (mm): 120 R.P.M.: 56 - 710 kW: 64 Volts: 380v Cycles: 50 3-Jaw chuck Ø (mm):...
Lathes - general
Weisser Heilbronn Senior Weisser Heilbronn Senior
Make: weisser-heilbronn Type: conventia Model: Senior Machine number: 33314 Centre distance (mm): 1.200 Max swing over bed (mm): Ø 760 Max swing over cross slide (mm): Ø 540 Spindle bore (mm): Ø 80 R.P.M.: 35 - 1120 (18x) kW: 11 Volts:...
Lathes - general
COLCHESTER Mascot 1600 Mkll x 1,000mm. POA COLCHESTER Mascot 1600 Mkll x 1,000mm. POA

Lathes - general
Poreba TCG125 x 12,000mm Heavy Duty Centre Lathe Poreba TCG125 x 12,000mm Heavy Duty Centre Lathe
Height of centres 625 mm. Maximum swing over bed 1250 mm. Maximum swing over saddle 940 mm. Distance between centres 12,000 mm. Maximum turning length 12,000 mm. Chuck diameter 1250 mm. Maximum clamping dia. in chuck 1050 mm. No. of spindle speeds...
Lathes - general
COLCHESTER Triumph x 1,250mm Gap Bed Centre Lathe. 2-axis DRO COLCHESTER Triumph x 1,250mm Gap Bed Centre Lathe. 2-axis DRO

Lathes - general
Turning CAZENEUVE HB 800 x 3,000mm. Digital Turning CAZENEUVE HB 800 x 3,000mm. Digital

Lathes - general
Turning CAZENEUVE Optica 590 Num. Year 2008. Cap 1,100x 590mm Turning CAZENEUVE Optica 590 Num. Year 2008. Cap 1,100x 590mm

Lathes - general
SCULFORT SUPERFACICAP 1500 LATHE SCULFORT SUPERFACICAP 1500 LATHE
Reference: TOU141 Model SUPERFACICAP 1500 Serial number 128200 Plate Ø (mm) 800 Turning length (mm) 650 Turning Ø (mm) 1540 Ø over cross-slides (mm) 700 Bed width (mm) 1100 Spindle speeds (Rpm) 24/10-800 Main motor power (Hp) 20 Machine...
Lathes - general
MERLI CLOVIS 50 X 5000 LATHE MERLI CLOVIS 50 X 5000 LATHE
Reference: TOU140 Model 50 Weight admitted (T) 10 Ø over the bed (mm) 1300 Spindle bore (mm) 150 Distance between-centers (mm) 5000 Ø in gap bed (mm) 1900 Width of gap bed (mm) 350 Ø over cross-slides (mm) 900 Bed width (mm) 600 Spindle... With video
Lathes - general
TOS SUI32A 42in x 6.5in TOS SUI32A 42in x 6.5in
20-3,150rpm, 2-axis DRO. £3,950
Lathes - general
COLCHESTER Triumph VS 2500 50in x 7.5in Gap Bed COLCHESTER Triumph VS 2500 50in x 7.5in Gap Bed
2-axis DRO. Ex university. Excellent condition. £10,750
Lathes - general
COLCHESTER Mastiff 1400 x 120in Met Gap Bed COLCHESTER Mastiff 1400 x 120in Met Gap Bed
Serial # LMF12 GMRJH/07124. C/w 3- & 4-jaw chucks, 2-axis Acu-Rite DRO, q.c.t.p. & holders, heavy duty fixed steady, taper turning, lo-vo-lite, bedstop. Good head & slideways. Warranty. POA
Lathes - general
HARRISON M300 Gap Bed HARRISON M300 Gap Bed
Wide variety of accessories & DRO. Good condition.
Lathes - general
Harrison M300 Short Bed Centre Lathe Harrison M300 Short Bed Centre Lathe
our ref: L01016.01 PRICE (EX VAT) £5,750 HARRISON M300 25” STRAIGHT BED CENTRE LATHE CAPACITY 25" (635mm) Between Centres 13" (330mm) Swing Over Bed 8 1/4" (210mm) Swing over cross slide SPINDLE BORE 1.5" (38mm) Spindle Nose...
Lathes - general
Harrison M250 2,000rpm Straight Bed Centre Lathe Harrison M250 2,000rpm Straight Bed Centre Lathe
our ref: L90711.01 PRICE (EX VAT) £5,750 HARRISON M250 30” (750mm) STRAIGHT BED CENTRE LATHE CAPACITY 30" (750mm) Between Centres 11" (280mm) Swing Over Bed 7" (178mm) Swing over cross slide 3MT Tail Stock 1.38" (35mm) SPINDLE...
Lathes - general
Colchester Triumph 2000 50in Gap Bed Lathe Colchester Triumph 2000 50in Gap Bed Lathe
our ref: C50704.01 PRICE (EX VAT) £9,750 COLCHESTER TRIUMPH 2000 GAP BED CENTRE LATHE Distance between centres 50” (1270mm) Height of centres 7 ½” (190mm) Swing over bed 15” (380mm) Swing in Gap 23” (585mm) Gap piece length...
Lathes - general
Colchester Triumph 2000 30in Straight Bed Lathe Colchester Triumph 2000 30in Straight Bed Lathe
our ref: C50721.01 PRICE (EX VAT) £6,950 COLCHESTER TRIUMPH 2000 30” STRAIGHT BED CENTRE LATHE Distance between centres 30” (750mm) Height of centres 7 ½” (190mm) Swing over bed 15” (380mm) Swing over cross slide...
Lathes - general
Colchester Mascot 60in Gap Bed Centre Lathe Colchester Mascot 60in Gap Bed Centre Lathe
This machine has just been sold but we are currently preparing another... CALL FOR DETAILS 0191 410 5886 COLCHESTER MASCOT 1600 GAP BED CENTRE LATHE CAPACITY 60" (1500mm) Between Centres 17” (433mm) Swing over the bed 10 1/2" (267mm)...
Lathes - general
Harrison Alpha 460T Gap Bed Centre Lathe (3350) Harrison Alpha 460T Gap Bed Centre Lathe (3350)
Harrison Alpha 460T Gap Bed Centre Lathe, 2001, s/n D40001, Harrison/Fanuc Operator panel and touch screen controller, Height of centres 230mm, distance between centres 1,500mm, Swing over bed 460mm, Swing in gap 730mm, spindle bore 76mm dia,...
Lathes - general
Broadbent Stanley Lathes Broadbent Stanley Lathes
World Leader Heavy Duty Flat Bed Lathes renowned in the Oil Industry. PA/PB Series Manual Hollow Spindle Lathes. Swing 880-1790mm, 1500-20000mm between centres.
Lathes - general
Broadbent Stanley High Precision Lathes Broadbent Stanley High Precision Lathes
Broadbent Stanley High Speed Precision Lathes. This award winning range offers swings ranging from 430-760mm and bed lengths from 760 to 5050mm.
Lathes - general
YORKY type ‘O’ Oilfield Grinding Machine YORKY type ‘O’ Oilfield Grinding Machine
Yorky type ‘O’ Oilfield Grinding Machine Swing over slides 44in, (1118 mm) Distance between centres 120in.(3048mm) Face width ground (max) 106in (2693mm) Wheel Size 30in x 12in hole x 3in wide Speed of spindle head traverses Variable,...
Lathes - general
COLCHESTER Mastiff 1400 Gap Bed Lathe 2,000mm between centres. POA COLCHESTER Mastiff 1400 Gap Bed Lathe 2,000mm between centres. POA

Lathes - general
VTL NILES, DKZ 2000 VTL NILES, DKZ 2000
1959, swing diameter 2,200mm
Lathes - general
HARRISON V350 Gap Bed Centre Lathe. Excellent condition HARRISON V350 Gap Bed Centre Lathe. Excellent condition

Lathes - general
CRAWFORD SWIFT 19/21 x 144in Gap Bed Lathe. CRAWFORD SWIFT 19/21 x 144in Gap Bed Lathe.
Spindle speeds 5-300rpm, swing over bed 42in / 1,066mm, distance between centres 144in / 3,657mm, power feed to compound slide
Lathes - general
COLCHESTER TRIUMPH 2000 GAP BED CENTRE LATHE COLCHESTER TRIUMPH 2000 GAP BED CENTRE LATHE
50"between centres, 7 1/2" centre height, speed 2000rpm, Dual dials, QCTP, 3 & 4 jaw chucks, faceplate, bedstop, coolant, centre
Lathes - general
COLCHESTER Triumph 2000 COLCHESTER Triumph 2000

Lathes - general
COLCHESTER Triumph 2000 x 50in Gap Bed Imp COLCHESTER Triumph 2000 x 50in Gap Bed Imp
S/n 6/0044/33286DD (ex Pfizer Corporation). C/w new Newall 2-axis DRO (to be fitted), 3- & 4-jaw chucks, quick change toolpost & 4-off holders, faceplate, bedstop & coolant. Excellent slides & headstock with original paintwork. Three...
Lathes - general
COLCHESTER Magnum 1250 x 3m Gap Bed Lathe COLCHESTER Magnum 1250 x 3m Gap Bed Lathe
C/w 3- & 4-jaw chucks, 1-axis DRO, light & heavy duty steadies, travelling steady, quick change toolpost & holders, taper turning. Lots of extra tooling. Quiet headstock and good slides. Rapid feed button needs replacing. £17,500
Lathes - general
SWIFT Model 16 V5 Heavy Duty Lathe. Capacity 1,100 x 1,500mm. POA SWIFT Model 16 V5 Heavy Duty Lathe. Capacity 1,100 x 1,500mm. POA

Lathes - general
XL 610X Heavy Duty Gap Bed Lathe. Capacity 625 x 2,000mm, spindle bore 103mm. POA XL 610X Heavy Duty Gap Bed Lathe. Capacity 625 x 2,000mm, spindle bore 103mm. POA

Lathes - general
Turning SAFOP S430 Sliding Bed. Capacity 3,500 x 860mm Turning SAFOP S430 Sliding Bed. Capacity 3,500 x 860mm

Lathes - general
Surface Grinding LGB R1170. Cap 1,100 x 700mm Surface Grinding LGB R1170. Cap 1,100 x 700mm

Lathes - general
Turning GURUTZPE 4,000 x 700mm Turning GURUTZPE 4,000 x 700mm

Lathes - general
DEAN SMITH & GRACE Type 30 Gap Bed Centre Lathe x 120in DEAN SMITH & GRACE Type 30 Gap Bed Centre Lathe x 120in
120mm spindle bore, 26in 4-jaw chuck, 120in b.c., 20in swing over saddle, 50in swing, double gap bed, powered traverse, 18in 3-jaw chuck, 24in width of bed, (2) fixed steadies, Heidenhain 2-axis DRO
Lathes - general
TURRET Powerturn GL32120 Heavy Duty Gap Bed Centre Lathe (1991) TURRET Powerturn GL32120 Heavy Duty Gap Bed Centre Lathe (1991)
800mm swing x 3,000mm b.c., power to compound, rapids, 3- & 4-jaw chucks, steadies. Great condition.
Lathes - general
COLCHESTER Mastiff 1400. 60in, DRO. £6,750 COLCHESTER Mastiff 1400. 60in, DRO. £6,750

Lathes - general
HARRISON M460 x 2,000mm Lathe HARRISON M460 x 2,000mm Lathe

Lathes - general
HARRISON M300 25in Met Gap Bed Lathe. Ex MoD Surplus HARRISON M300 25in Met Gap Bed Lathe. Ex MoD Surplus
Excellent slides and headstock. C/w 3- & 4-jaw chucks, q.c.t.p. & holders, bedstop, coolant. Three months parts warranty. Extra accessories available: DRO, Ainjest, copy unit etc. POA
Lathes - general
Colchester Student 1800 x 25 Colchester Student 1800 x 25
Student 1800 x 25" Metric Straight bed (Very Good Ex-college). C/w 3&4 jaw chucks, Q'change toolpost & holders, coolant. Extra accessories available: DRO, Ainjest,Copy unit, etc. Ref 22.
Lathes - general
MAZAK Slant Turn 50N x 3,000mm CNC Hollow Spindle Oil Country Lathe MAZAK Slant Turn 50N x 3,000mm CNC Hollow Spindle Oil Country Lathe
Mazatrol T plus, spindle bore 320mm dia. POA
Lathes - general
BROADBENT STANLEY BS-760 Gap Bed Lathe BROADBENT STANLEY BS-760 Gap Bed Lathe
Spindle bore 120mm, DRO and taper turning. POA
Lathes - general
MAZAK Integrex 40 ATC (3-Axis) CNC Lathe Mazatrol T32-3 control MAZAK Integrex 40 ATC (3-Axis) CNC Lathe Mazatrol T32-3 control
POA
Lathes - general
COLCHESTER Magnum 1250 Gap Bed Lathe x 2,500mm COLCHESTER Magnum 1250 Gap Bed Lathe x 2,500mm
Spindle bore 118mm. POA
Lathes - general
COLCHESTER Mastiff 1400 Gap Bed Lathe. 2,500mm between centres. POA COLCHESTER Mastiff 1400 Gap Bed Lathe. 2,500mm between centres. POA

Lathes - general
Centre Lathe WOHLENBERG, V 1000 Centre Lathe WOHLENBERG, V 1000
1985, swing 1,020mm, distance 3,000mm
Lathes - general
Vertical Turning GRAFFENSTADEN. Table 1,600mm Vertical Turning GRAFFENSTADEN. Table 1,600mm

Lathes - general
Turning HARDINGE HLVH. Digital, tooling Turning HARDINGE HLVH. Digital, tooling

Lathes - general
Turning CAZENEUVE HB 725 x 5,000mm, digital Turning CAZENEUVE HB 725 x 5,000mm, digital

Lathes - general
Turning CAZENEUVE HBX 360. Cap 750 x 360mm Turning CAZENEUVE HBX 360. Cap 750 x 360mm

Lathes - general
COLCHESTER Triumph 2000 COLCHESTER Triumph 2000
Fully refurbished 30in machine
Lathes - general
EXCEL Model XL40 EXCEL Model XL40
1,000mm swing x 3,000mm, swing over cross-slide 740mm, gap bed, steadies, chucks, 8-1,000rpm Year 1998
Lathes - general
HERBERT 14/45 Turret Lathe 1,230mm x 2,300mm HERBERT 14/45 Turret Lathe 1,230mm x 2,300mm
Swing over bed 1,230mm (48.5in), swing over cross slide 815mm (32in), max distance between chuck and turret face 2,300mm (90.5in), spindle speeds 3-360rpm, spindle bore 210mm (8.25in), 4-jaw chuck 1,065mm dia (42in), main motor 50hp....
Lathes - general
HARRISON M550 x 2,000mm Gap Bed Centre Lathe (1997) HARRISON M550 x 2,000mm Gap Bed Centre Lathe (1997)
554mm swing x 2,000mm b.c., rapids, DRO, q.c.t.p., 3- & 4-jaw chucks, steady.
Lathes - general
TRENS SN710S x 2,000mm Gap Bed Centre Lathe (2001) TRENS SN710S x 2,000mm Gap Bed Centre Lathe (2001)
720mm swing x 2,000mm b.c., rapids, DRO, 3- & 4-jaw chucks, faceplate, steadies.
Lathes - general
HARRISON M390 x 1,250mm Gap Bed Centre Lathe (2002) HARRISON M390 x 1,250mm Gap Bed Centre Lathe (2002)
390mm swing x 1,250mm b.c., DRO, q.c.t.p., 3- & 4-jaw chucks, steady. Excellent condition.
Lathes - general
COLCHESTER Mastiff VS1800 x 2,000mm Gap Bed Centre Lathe (2007) COLCHESTER Mastiff VS1800 x 2,000mm Gap Bed Centre Lathe (2007)
554mm swing x 2,000mm b.c., rapids, DRO, q.c.t.p., 3- & 4-jaw chucks, steady.
Lathes - general
COLCHESTER Triumph 2000 x 1,250mm Gap Bed Centre Lathe COLCHESTER Triumph 2000 x 1,250mm Gap Bed Centre Lathe
390mm swing x 1,250mm b.c., new DRO, q.c.t.p., 3-jaw chuck, steady. Excellent condition
Lathes - general
HARRISON M400 x 40in HARRISON M400 x 40in

Lathes - general
COLCHESTER Triumph 2000 x 30in Gap Bed Imp. - Arriving May COLCHESTER Triumph 2000 x 30in Gap Bed Imp. - Arriving May
Serial # LTR 30GIRHJ/38135 (ex Pfizer Corporation). C/w 3- & 4-jaw chucks, q.c.t.p. & 4-off holders, faceplate, bedstop and coolant. Excellent slides & headstock with original paintwork. Three months parts warranty. Extra accessories...
Lathes - general
WARD 7D Prelector Turret Lathe. Reconditioned WARD 7D Prelector Turret Lathe. Reconditioned
3-jaw chuck, screw cutting, taper turning, indexing toolpost, spindle bore 5.25in diameter, spindle speeds 18-730rpm x 12 steps, 3-phase electrics
Lathes - general
BSA Precision C6256 Geared Head Gap Bed Centre Lathe BSA Precision C6256 Geared Head Gap Bed Centre Lathe
Max’ Distance Between Centres 2000mm Max’ Swing in Gap 785mm Max’ Swing over Bed 560mm Max’ Swing Over Cross-Slide 355mm Spindle Bore 80mm Spindle Speeds 25 -1600 rpm Quick Change Tool Post Coolant 3 Phase Electrics 7.5kW Motor Tailstock...
Lathes - general
MAZAK Quick Turn Nexus 350MY with C &  Y Axis and Milling (2006) MAZAK Quick Turn Nexus 350MY with C & Y Axis and Milling (2006)
Max cutting diameter 420mm, 750mm swing, max cutting length 1,524mm, 102mm bar capacity, 3,300rpm spindle, 4,000rpm milling, Y-axis +/-75mm, 12-station turret, 30kW motor power, 3-jaw chuck, Mazatrol 640T Nexus control, 0.001...
Lathes - general
DOOSAN Puma 400MB CNC Lathe with C Axis and Milling (2007) DOOSAN Puma 400MB CNC Lathe with C Axis and Milling (2007)
770mm swing, 560mm max machining diameter, 978mm max turning length, 2,000rpm spindle, 117mm bar capacity, 12-station turret, 0.001 degree C-axis with milling (7.5kW/3,000rpm), 26kW spindle motor, Fanuc 21i-TB control, 3-jaw power...
Lathes - general
COLCHESTER Mastiff VS1800 2,000mm BC Gap Bed Centre Lathe (2007) COLCHESTER Mastiff VS1800 2,000mm BC Gap Bed Centre Lathe (2007)
280mm centre height, 554mm swing over bed, 370mm swing over cross-slide, 830mm swing in the gap, 2,000mm between centres, 90mm spindle bore, 1,800rpm infinitely variable spindle, coolant, 3- & 4-jaw chucks, quick change toolpost &...
Lathes - general
Teach-In Lathe HARRISON ALPHA 550S X 2000 Teach-In Lathe HARRISON ALPHA 550S X 2000
YOM 2000. Dia over bed 554mm, spindle bore 90mm, dist between centres 2,000mm, dia in gap bed 830mm, width of gap bed 216mm, dia over cross-slides 370mm, bed width 400mm, spindle speeds 65-1,800rpm, feeds 12 / 0.03-0.4mm/min,...
Lathes - general
Turning SCHAUBLIN 102NVM. Tooling Turning SCHAUBLIN 102NVM. Tooling

Lathes - general
Turning ERNAULT Jupiter. 920 x 3,000mm, digital, tooling Turning ERNAULT Jupiter. 920 x 3,000mm, digital, tooling

Lathes - general
Turning GEMINIS GE 3,000 x 1,000mm Turning GEMINIS GE 3,000 x 1,000mm

Lathes - general
Turning GEMINIS GE 4,000 x 1,200mm Turning GEMINIS GE 4,000 x 1,200mm

Lathes - general
(12) Colchester Student 1800 Lathes (12) Colchester Student 1800 Lathes
25/40in between centres. Ex college
Lathes - general
Colchester Triumph 2000 50in Gap Bed Lathe Colchester Triumph 2000 50in Gap Bed Lathe
Equipment, taper turning, 390mm swing x 1,250mm
Lathes - general
Hardinge HLV-H High Speed Super Precision Tool Room Lathe Hardinge HLV-H High Speed Super Precision Tool Room Lathe
Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1...
Lathes - general
Colchester Triumph 2000 Gap Bed Centre Lathe Colchester Triumph 2000 Gap Bed Centre Lathe
Colchester Triumph 2000 Gap Bed Centre Lathe Max’ Distance Between Centres 1250mm Max’ Swing over Bed 390mm Max’ Swing in Gap 580mm Spindle Bore 54mm 10” 3 Jaw Chuck Nose Type D16 Camlock Spindle Speeds 25 -2000 rpm Inside & Outside...
Lathes - general
Harrison Model 390 Harrison Model 390
Swing over bed 400mm x 1,250mm, gap bed, 25-2,000rpm, full equipment, DRO
Lathes - general
COLCHESTER Mastiff VS 1800 Gap Bed Lathe. 3,000mm between centres. POA COLCHESTER Mastiff VS 1800 Gap Bed Lathe. 3,000mm between centres. POA

Lathes - general
SAFOP LEONARD TR1000 Combined Centre Lathe & Cylindrical Grinding Machine SAFOP LEONARD TR1000 Combined Centre Lathe & Cylindrical Grinding Machine
Stock no 28892 Swing over bed 1,220mm, swing over cross slide 1,016mm, distance between centres 7,500mm, 5x fixed steadies, grinding capacities: max grinding dia 1,067mm, max grinding length traverse 7,264mm, minimum grinding dia 76mm
Lathes - general
COLCHESTER Master 2500 40in Gap Bed Centre Lathe COLCHESTER Master 2500 40in Gap Bed Centre Lathe
2,500rpm, 330 x 1,000mm, 5hp, 3- & 4-jaw chucks, q.c.t.p. with holders, electric brake. POA
Lathes - general
HAAS Servo 300 Magazine Bar Feed HAAS Servo 300 Magazine Bar Feed
£3,000 + VAT YOM 2000
Lathes - general
XYZ 1430 Centre Lathe XYZ 1430 Centre Lathe
Ex schools machine. 2-Axis Newall DRO, 3- & 4-jaw chucks, face plate, steadies, CE guarding. 3 available. YOM 2013
Lathes - general
Ryazan RT 117-3 Heavy Duty Manual lathe Ryazan RT 117-3 Heavy Duty Manual lathe
1.2metre swing, 3 metres between centres, with 2-Axis DRO and heavy duty steady. Immaculate! YOM 2007
Lathes - general
TOS SN 71C TOS SN 71C
Offered to the market in very nice ciodition with 3 jaw chuck, 2 axis Newall DRO and a powered saddle, this TOS SN71C x 2000mm is worth a look. YOM 2006, in stock and ready for demonstation. Capacity: Swing Over Bed -28" Swing Over Cross Slide -...
Lathes - general
Colchester Mascot 1600 x 502 gap bed machine Colchester Mascot 1600 x 502 gap bed machine
fully reground and rebuilt machine, new DRO, New chucks, new guard.
Lathes - general
Colchester Student 1800 x 40 Colchester Student 1800 x 40
with 3-jaw chuck, tailstock, quick change tool post and 2-axis DRO. YOM circa 1980
Lathes - general
Harrison M300 Harrison M300
with 3-jaw chuck, quick change tool post, tailstock and 2-axis DRO. Ex University. Choice of 3 machines!
Lathes - general
Pinachio 165 Manual Lathes Pinachio 165 Manual Lathes
Briefly, these ex college 2004 built Pinachio 165 manual gap bed centre lathes are being sold with 3 & 4 jaw chucks, rear splash guards with built in work light, interlocked guards, quick change tool posts. In super condition! Choice of 4 machines....
Lathes - general
Pinachio 165 Manual Lathes with 3- & 4-jaw chucks. Pinachio 165 Manual Lathes with 3- & 4-jaw chucks.
Ex college machine. YOM 2002
Lathes - general
Colchester Triumph 2000 Gap Bed Colchester Triumph 2000 Gap Bed
Colchester Triumph 2000 Lathe 50" Gap Bed supplied with 2 Axis DRO, 3 Jaw Chuck, Quick Change Toolpost & 3 Holders, Chuck Key, LVL, Tool Post Key
Lathes - general
Colchester Triumph VS Colchester Triumph VS
COLCHESTER Triumph VS2500 Gap Bed Lathe x 1250mm Between Centres Swing over the Bed 400mm. Distance Between Centres 1250mm.Spindle Bore 54mm. Motor 10 HP. Variable Spindle Speeds. 3 Jaw Chuck. Quick Change Toolpost. Quick Change Toolholders....
Lathes - general
MACH L1340 Manual Lathe MACH L1340 Manual Lathe
MACHINE SPECIFICATIONS MACH L-1340 CAPACITY Centre height: 171 mm Swing over bed: 342 mm Dia Swing in gap: 512 mm Swing over cross slide: 205 mm Dia Distance between centres: 1000 mm Width of bed: 230 mm Length of gap in front of face plate: 150 mm...
Lathes - general
Colchester Mastiff 1400 x 40in Short Bed Machine Colchester Mastiff 1400 x 40in Short Bed Machine
With 2-Axis DRO, QCTP, 3- & 4-jaw chucks. Ex college
Lathes - general
Colchester Mascot 1600 x 80in Colchester Mascot 1600 x 80in
With 2-Axis DRO, quick change tool post, 3- & 4-jaw chucks. Ex college
Lathes - general
Harrison M550 Harrison M550
554mm max. Swing over bed, 370mm swing over cross slide, 830mm swing in the gap, 2000mm Distance between Centres, 1800rpm spindle, 90mm bar capacity, fixed steady, coolant, Quick Change Toolpost & Holders, D1-11 Spindle nose
Lathes - general
Colchester Mastiff 1400 Colchester Mastiff 1400
Make: Colchester Model: Mastiff 1400 Maximum Cutting diameter: 554mm Maximum Cutting Length: 1000mm Swing over the Cross-slide: 370mm Centre height: 270mm Spindle Bore: 90mm Spindle Speed: 16 Speeds: 18 - 1400rpm Swing: 535mm Swing in the...
Lathes - general
Colchester Mastiff x 84 Gap Bed Lathe Colchester Mastiff x 84" Gap Bed Lathe
with 3- & 4-jaw chucks, quick change tool post, 2-axis DRO
Lathes - general
Colchester Master 3250 VS x 60 Colchester Master 3250 VS x 60
Colchester Master 3250 VS x 60” gap bed manual centre lathe is photographed as received. Supplied with 2 Axis Digital readout, 3 Jaw chuck, quick change tool post and a variety of holders Specification: Make: Colchester: Model: Master 3250...
Lathes - general
Harrison M250 with 2-Axis DRO Harrison M250 with 2-Axis DRO
3-jaw chuck, collet chuck and quick change tool post. YOM 2000
Lathes - general
HARRISON M350 Gap Bed HARRISON M350 Gap Bed
Swing 380mm x 1,500mm b.c., spindle speeds 40-2,200rpm, bore 54mm. C/w chucks
Lathes - general
Training Academy – (6) Colchester, (5) Harrison and (5) Ajax Lathes Training Academy – (6) Colchester, (5) Harrison and (5) Ajax Lathes
Please contact us for more details
Lathes - general
Pangborn 8LK Twin Wheel Rotary Table Shotblast Pangborn 8LK Twin Wheel Rotary Table Shotblast
Pangborn 8LK Twin Wheel Rotary Table Shotblast Model 8LK 8 ft Capacity Table Twin Wheel Dust Extractor
Lathes - general
Mostana IM63 x 3000mm Centre Lathe Mostana IM63 x 3000mm Centre Lathe
Mostana IM63 x 3000mm Centre Lathe Swing Over Bed 660mm, Swing Over Cross Slide 355mm, Distance Between Centres 3000mm Speeds 10 1250 rpm Complete With: 3 jaw 16? 4 jaw 26? Fixed Steady 15? and Trav. Steady Chuck Guard Digital...
Lathes - general
Deans Smith & Grace 2112 x 100 Centre Lathe (1979) Deans Smith & Grace 2112 x 100 Centre Lathe (1979)
Deans Smith & Grace 2112 x 100 Centre Lathe (1979) Swing Over Bed 21?, Distance Between Centres 100? Speeds 11.2 – 1250 rpm Complete With: 18” 3 Jaw Chuck Fixed Steady 12? and Trav. Steady Rapids to saddle Manual 4 Way Tool...
Lathes - general
COLCHESTER Mastiff 1400 x 1,000mm Gap Bed Centre Lathe COLCHESTER Mastiff 1400 x 1,000mm Gap Bed Centre Lathe
535mm swing x 1,000mm b.c., DRO, q.c.t.p., 3-jaw chuck.
Lathes - general
HARRISON M400 Gap Bed Centre Lathe HARRISON M400 Gap Bed Centre Lathe
Swing 410mm x 1,000mm b.c. C/w 3- & 4-jaw chucks and coolant
Lathes - general
HARRISON M400 Gap bed centre lathe HARRISON M400 Gap bed centre lathe
Swing 410mm x 1,500mm b.c. C/w 3-jaw chuck, fixed steady, coolant and light
Lathes - general
KRAMATORSK 1A660 Lathe KRAMATORSK 1A660 Lathe
• Turning length 6,300mm • Turning 1,450mm • Machine weight 35,000kg • Chuck diameter 1,250mm • Turning diameter over support 900mm • Workpiece weight 25,000kg
Lathes - general
Turning STANKO 3,000 x 630mm Turning STANKO 3,000 x 630mm

Lathes - general
Turning POREBA TPK 90 x 3,000mm. Digital. 1987 Turning POREBA TPK 90 x 3,000mm. Digital. 1987

Lathes - general
Turning GURUTZPE. Cap 1,500 x 1,200mm, 1,500mm in gap, bore 140mm Turning GURUTZPE. Cap 1,500 x 1,200mm, 1,500mm in gap, bore 140mm

Lathes - general
COLCHESTER Triumph 2000. 15in swing gap bed x 30in b.c., 2in spindle bore COLCHESTER Triumph 2000. 15in swing gap bed x 30in b.c., 2in spindle bore

Lathes - general
HARRISON M390 x 1,250mm Gap Bed Centre Lathe (2004) HARRISON M390 x 1,250mm Gap Bed Centre Lathe (2004)
Height of centres 195mm, dist b.c. 1,250mm, swing over bed 400mm, swing in gap 585mm, gap width from faceplate 165mm, swing over cross slide 246mm, spindle bored to pass 54mm, spindle nose Camlock D1-6, 4 MT, spindle speeds 16 (25-2,000rpm), main...
Lathes - general
HARRISON Type VS-330 Toolroom Centre Lathe HARRISON Type VS-330 Toolroom Centre Lathe
Centre height 6 9/16in, swing over bed 13in, distance between centres 25in, swing over cross slide 8 1/4in, spindle bore 1 1/2in, spindle speeds 35-3,000rpm, metric L/S & metric dials. C/w 3- & 4-jaw chucks, 3-point steady, quick change tool post,...
Lathes - general
RAFAMET KCF 400 Vertical Turning Lathe RAFAMET KCF 400 Vertical Turning Lathe
• Year 1994 • Table diameter 3,600mm • Max turning diameter 4,000mm • Max turning height 3,000mm • Digital readout
Lathes - general
COLCHESTER Triumph 2000 COLCHESTER Triumph 2000
Swing 390 x 1,250mm. C/w 3- & 4-jaw chucks, fixed steady, quick change toolpost
Lathes - general
COLCHESTER Master 2500 40in Gap Bed COLCHESTER Master 2500 40in Gap Bed
Ainjest, taper turning, equipment
Lathes - general
COLCHESTER Mastiff 2,000mm Gap Bed COLCHESTER Mastiff 2,000mm Gap Bed
Chucks, steadies, full equipment
Lathes - general
Colchester Master 2500  Colchester Master 2500
1000mm bc ,gap bed , taper turning ,full equipment
Lathes - general
COLCHESTER Mascot 1600 1,000mm Gap Bed Full Equipment COLCHESTER Mascot 1600 1,000mm Gap Bed Full Equipment

Lathes - general
EXCEL XL 580 Gap Bed Centre Lathe EXCEL XL 580 Gap Bed Centre Lathe
580 X 4000MM , YEAR 1997 , FULL EQUIPMENT, EUROPEAN MADE.
Lathes - general
COLCHESTER MASTIFF 1800 VS COLCHESTER MASTIFF 1800 VS
554MM SWING X 2000MM ,GAP BED,15HP VARIABLE SPPED 55-1800RPM DRO ,FULL EQUIPMENT ,90mm spindle bore
Lathes - general
HARRISON V390 Lathe HARRISON V390 Lathe
400mm x 1,250mm capacity, 3-&4-jaw chucks, chuck guard, Mitutoyo 2-axis DRO. Year 1998. £7,950
Lathes - general
COLCHESTER STUDENT 1800 x 635mm Gap Bed Centre Lathe (1986) COLCHESTER STUDENT 1800 x 635mm Gap Bed Centre Lathe (1986)
335mm swing x 635mm b.c., 3 Jaw chuck, 3 point steady.
Lathes - general
AJAX AJL 370 x 4000mm Large Capacity Gap Bed Centre Lathe (2014) AJAX AJL 370 x 4000mm Large Capacity Gap Bed Centre Lathe (2014)
740mm swing x 4000mm b.c., D.R.O., Q.C.T.P., 3 & 4 Jaw chucks, 2 x 3 point steady, Travelling steady, Rapids, Excellent condition.
Lathes - general
COLCHESTER TRIUMPH 2000TR x 1270mm Tool Room Straight Bed Centre Lathe COLCHESTER TRIUMPH 2000TR x 1270mm Tool Room Straight Bed Centre Lathe
390mm swing x 1250mm b.c., Q.C.T.P., 3 & 4 Jaw chucks.
Lathes - general
Myday Heavy Duty Hollow Spindle Oil Country Lathe Myday Heavy Duty Hollow Spindle Oil Country Lathe
Year: 2007 Swing over Bed: 1060mm Swing over Cross Slide: 750mm Swing in Gap: 1610mm Distance Between Centres: 3000mm Spindle Bore: 310mm (12”) Spindle Speeds: 4 – 300 RPM Machine with: Front and rear...
Lathes - general
COLCHESTER Magnum 1250 Gap Bed Lathe Spindle bore 118mm. POA COLCHESTER Magnum 1250 Gap Bed Lathe Spindle bore 118mm. POA

Lathes - general
COLCHESTER Mastiff 1400 x 40in Met Gap Bed. COLCHESTER Mastiff 1400 x 40in Met Gap Bed.
In very good condition. C/w 3- & 4-jaw chucks, 2-axis DRO, quick change toolpost & holders, lo-vo-lite, bedstop. Original slideways very good & very good headstock. POA
Lathes - general
Arriving shortly:Ex-Campus College Triumph VS 2500 x 30 Gap Bed Lathe Arriving shortly:Ex-Campus College Triumph VS 2500 x 30" Gap Bed Lathe
In excellent condition.....POA C/w 3 & 4 jaw chucks, chuck guard, Q/C toolpost & holders,Lo-Vo-Lite, coolant, ,bedstop. Extra accessories available: DRO, Ainjest,Copy unit, etc.
Lathes - general
ERNAULT-SOMUA CHOLET 550 X 1000 LATHE ERNAULT-SOMUA CHOLET 550 X 1000 LATHE
Reference: TOU125 Model CHOLET 550 Ø over the bed (mm) 550 Spindle bore (mm) 52 Distance between-centers (mm) 1000 Ø over cross-slides (mm) 312 Bed width (mm) 384 Spindle speeds (Rpm) 8/32-1600 Feeding speeds (mm/mn) L28/0.05-0.7... With video
Lathes - general
 POREBA TPK80 x 4,000mm Centre Lathe. POREBA TPK80 x 4,000mm Centre Lathe.
Year 1979. Reconditioned 2014
Lathes - general
Colchester Student 1800 Colchester Student 1800
c/w Ainjest Metric M/c in excellent Cond
Lathes - general
Herbert 14/45 Combination Turret Lathe Herbert 14/45 Combination Turret Lathe
Swing Over Bed: 1230mm (48 ½”) Swing Over Cross Saddle: 815mm (32”) Distance Between Chuck & Turret Face: 2300mm (90 ½”) Spindle Speeds: 3 – 360 RPM Spindle Bore: 210mm (8 ¼”) Machine With: 1054mm (42”) dia. 4 – jaw chuck Adjustable Knee...
Lathes - general
BINNS & BERRY L1000 Gap Bed Lathe 1,500mm between centres. POA BINNS & BERRY L1000 Gap Bed Lathe 1,500mm between centres. POA

Lathes - general
WEILER E 50/1 Teach-In Lathe. 2001, Siemens Sinumerik 810 D WEILER E 50/1 Teach-In Lathe. 2001, Siemens Sinumerik 810 D

Lathes - general
SCHNEIDER TP 80 Heavy Duty Lathe SCHNEIDER TP 80 Heavy Duty Lathe
Max turning dia 2,200, turning length 5,000mm
Lathes - general
WOHLENBERG V 1000 Centre Lathe WOHLENBERG V 1000 Centre Lathe
1985, dia 1,020 510 x 3,000mm, spindle bore 104mm dia.
Lathes - general
HARRISON M460 x 2,000mm HARRISON M460 x 2,000mm
460mm x 2,000mm gap bed capacity, 3- & 4-jaw chucks, chuck guard, 76mm spindle bore, 2- & 3-point steadies, rapid feeds all directions, Newall Sapphire 2-axis DRO £14,950
Lathes - general
MOSTANA 16K40 x 3,000mm Gap Bed Centre Lathe (1998) MOSTANA 16K40 x 3,000mm Gap Bed Centre Lathe (1998)
Swing over bed 800mm, dist b.c. 3,000mm, hollow spindle 110mm, speeds 6.3-1,000rpm, rapid traverse to saddle long & cross, power feed to compound slide, gap bed. Equipped with: 4-way toolpost, DRO, 3- & 4-jaw chucks, fixed and...
Lathes - general
Dean Smith & Grace Type 1307 x 40 Straight Bed Dean Smith & Grace Type 1307 x 40 Straight Bed
Dean Smith & Grace Type 1307 x 40 Straight Bed Centre Lathe, 13? Swing Over Bed, 26? Swing in Gap, 40? Distance Between Centres, Spindle Bore 2?, Spindle Speeds 20 to 1600rpm, 4 Jaw Chuck, Quick Change Tool post
Lathes - general
Turning CAZENEUVE HB 725 x 2,000mm Turning CAZENEUVE HB 725 x 2,000mm

Lathes - general
Turning CAZENEUVE HB. 725 x 1,000mm, digital, Heidenhain Turning CAZENEUVE HB. 725 x 1,000mm, digital, Heidenhain

Lathes - general
Vertical Turning BERTHIEZ  Digital, table 1,800mm,  swing 3,200mm Vertical Turning BERTHIEZ Digital, table 1,800mm, swing 3,200mm

Lathes - general
TADU FS 750 Facing Lathe. Capacity 3,000 x 2,000mm TADU FS 750 Facing Lathe. Capacity 3,000 x 2,000mm

Lathes - general
Turning ERNAULT SE 1,200 x 6,000mm, digital, continuous variable spindle speed Turning ERNAULT SE 1,200 x 6,000mm, digital, continuous variable spindle speed

Lathes - general
CNC Turning MEUSER. Fagor 8055, cap 7,000 x 1,750mm CNC Turning MEUSER. Fagor 8055, cap 7,000 x 1,750mm

Lathes - general
Turning SCULFORT. 3,000 x 1,500mm over bed Turning SCULFORT. 3,000 x 1,500mm over bed

Lathes - general
Turning STANKO 8,000 x 1,000mm Turning STANKO 8,000 x 1,000mm

Lathes - general
Turning CAZENEUVE HB. 725 x 2,000mm gap bed, 950mm Turning CAZENEUVE HB. 725 x 2,000mm gap bed, 950mm

Lathes - general
Turning CAZENEUVE HBX 590. Digital, cap 1,800 x 590mm Turning CAZENEUVE HBX 590. Digital, cap 1,800 x 590mm

Lathes - general
Turning CAZENEUVE Optica 800 x 2,000mm Teach In Lathe. Year 2006 Turning CAZENEUVE Optica 800 x 2,000mm Teach In Lathe. Year 2006

Lathes - general
Turning POREBA TR 135 Cap 6,000 x 1,350mm Digital Turning POREBA TR 135 Cap 6,000 x 1,350mm Digital

Lathes - general
CAZENEUVE Maxica 590 Teach-In Lathe. Year 1998. Capacity 1,100 x 590mm, bore 81mm CAZENEUVE Maxica 590 Teach-In Lathe. Year 1998. Capacity 1,100 x 590mm, bore 81mm

Lathes - general
ERNAULT Cholet 550 Turning ERNAULT Cholet 550 Turning
Digital, cap 2,800 x 550mm
Lathes - general
CNC VTL BERTHIEZ CNC VTL BERTHIEZ
Table 2,000mm, CNC Num
Lathes - general
VICTORIA Turning. 8,000 x 1,440mm VICTORIA Turning. 8,000 x 1,440mm

Lathes - general
Colchester Triumph 2000 Lathe. 50 Gap Bed. Colchester Triumph 2000 Lathe. 50 Gap Bed.
2 Axis DRO. 3/4 Jaw chucks . Dixon Q,C,T,P with holders Drill chuck .
Lathes - general
Colchester Triumph 2000 Centre Lathe Colchester Triumph 2000 Centre Lathe
Centre height…190mm Swing over bed…390mm Swing over cross slide…240mm Distance between centres…1250mm Spindle bore…54mm Spindle speeds & No of changes…25 – 2000 rpm, 16 Main motor…7 ½ HP Foot print…(LxWxH) 1930mm x 965mm x 1250mm C/w 3 jaw...
Lathes - general
HARRISON M300 Gap Bed Centre Lathe HARRISON M300 Gap Bed Centre Lathe
Swing over bed 330mm, between centres 635mm, spindle bore 38mm, C/w 3- & 4-jaw chucks. Choice of 2. £4,250
Lathes - general
DEAN SMITH & GRACE 2112 x 50 Gap Bed Centre Lathe. Swing 21in x 50in between centres.  C/w chucks etc. POA DEAN SMITH & GRACE 2112 x 50 Gap Bed Centre Lathe. Swing 21in x 50in between centres. C/w chucks etc. POA

Lathes - general
DEAN SMITH & GRACE 2112 x 50 Gap Bed Centre Lathe. Swing 21in x 50in between centres. C/w chucks etc. POA DEAN SMITH & GRACE 2112 x 50 Gap Bed Centre Lathe. Swing 21in x 50in between centres. C/w chucks etc. POA

Lathes - general
POREBA TR115 B/3M Gap Bed Centre Lathe. POREBA TR115 B/3M Gap Bed Centre Lathe.
Swing over bed 1,150mm, swing in gap 1,480mm, spindle speeds up to 500rpm, 3m between centres. C/w 1,250mm 4-jaw chuck, steady & DRO. POA
Lathes - general
COLCHESTER Mastiff 40in and 60in Lathes COLCHESTER Mastiff 40in and 60in Lathes

Lathes - general
DSG T 21 x 60 Gap Bed Lathe Very good condition DSG T 21 x 60 Gap Bed Lathe Very good condition

Lathes - general
COLCHESTER Mastiff 100in Lathe COLCHESTER Mastiff 100in Lathe

Lathes - general
COLCHESTER Mastiff 40in COLCHESTER Mastiff 40in
C/w 3-axis DRO
Lathes - general
WARD 7E Big Bore Lathe WARD 7E Big Bore Lathe

Lathes - general
COLCHESTER Master 2500 COLCHESTER Master 2500
C/w 3-jaw chuck
Lathes - general
COLCHESTER Triumph 2000 30in & 50in Lathes - Fully Refurbished COLCHESTER Triumph 2000 30in & 50in Lathes - Fully Refurbished

Lathes - general
BINNS & BERRY Trident L850 Centre Lathe x 12,000mm Between Centres. Rebuilt 2008 BINNS & BERRY Trident L850 Centre Lathe x 12,000mm Between Centres. Rebuilt 2008
Swing over bed 850mm. Swing over saddle 620mm. Distance between Centres 12,000mm. Windmill steady. 2 x 3 point fixed steadies. 3 x 2 point steadies. Coolant. Newall Digital Readout. Rebuilt in 2008
Lathes - general
 COLCHESTER STUDENT GAP BED CENTRE LATHE 1800 COLCHESTER STUDENT GAP BED CENTRE LATHE 1800
24" Between Centres. Speeds to 1800 Rpm, Fitted with Pratt 200mm 3 jaw chuck, comes with Pratt 250mm Dia 4 jaw chuck. (5) Tool Holders, QCTP, Back Plate, Chuck Keys, (3) Spare gears, Wizard 150 DRO. Nelsa interlocking sliding Guard fitted With video
Lathes - general
ACRA FCL CENTRE LATHES 1550G IN STOCK NOW ACRA FCL CENTRE LATHES 1550G IN STOCK NOW
2 Axis DRO, 3 & 4 Jaw chucks, Fixed & Travelling Steadies, Face Plate, Tool Holders. Height Of Centres 190mm Between Centres 1250mm Swing Over Bed 380mm Width Of Bed 280mm Swing Over Crosslide 238mm Swing In Gap 610mm Spindle Nose D1-6, MT no...
Lathes - general
ACRA FSML CENTRE LATHES 1440 ACRA FSML CENTRE LATHES 1440
ACRA FSML CENTRE LATHES 1440 SPECIFICATION 2 Axis DRO, 3 & 4 Jaw chucks, Fixed & Travelling Steadies, Face Plate, Tool Holders Between Centres 1000mm Swing over bed 356MM Swing over cross side 220mm Swing in gap 515mm Width of bed...
Lathes - general
DSG Type 30 x 120 Inch Gap Bed Centre Lathe DSG Type 30 x 120 Inch Gap Bed Centre Lathe
120mm Spindle Bore, Fitted With 26” 4 Jaw Chuck, 120” Between Centres, Approx 20” Swing Over Saddle, Approx 50” Swing, Double Gap Bed (Bed out), powered traverse, 18” 3 Jaw Chuck, 24” Width Of Bed, (2) Fixed Steadies, Heidenhain 2 Axis DRO
Lathes - general
Dean Smith & Grace 1348 Centre Lathe Dean Smith & Grace 1348 Centre Lathe
Fixed steady, taper turning attachment, 4-way toolpost, screwcutting TPi, 8in 3-jaw chuck, power drill attachment, coolant, lo-vo light. S/no 37986-7-69
Lathes - general
Harrison V 330 Centre Lathe. S/no V30015. Fitted with Newall DP7 2-axis DRO Harrison V 330 Centre Lathe. S/no V30015. Fitted with Newall DP7 2-axis DRO

Lathes - general
Harrison M390 Gap Bed Centre Lathe. S/no DG 0231/G70763. Fitted with Newall Topaz 2-axis DRO. New 2004 Harrison M390 Gap Bed Centre Lathe. S/no DG 0231/G70763. Fitted with Newall Topaz 2-axis DRO. New 2004

Lathes - general
COLCHESTER Triumph VS2500 x 1,250mm Gap Bed Centre Lathe COLCHESTER Triumph VS2500 x 1,250mm Gap Bed Centre Lathe
400mm swing x 1,250mm b.c., DRO, taper turning, q.c.t.p., 3- & 4-jaw chucks, steadies.
Lathes - general
EXCEL XL610X x 2,000mm Heavy Duty Gap Bed Centre Lathe. 515mm swing x 2,000mm b.c., DRO, q.c.t.p., 3- & 4-jaw chucks, faceplate, steadies EXCEL XL610X x 2,000mm Heavy Duty Gap Bed Centre Lathe. 515mm swing x 2,000mm b.c., DRO, q.c.t.p., 3- & 4-jaw chucks, faceplate, steadies

Lathes - general
COLCHESTER Triumph VS2500 x 1,250mm Gap Bed Centre Lathe. 400mm swing x 1,250mm b.c., DRO, taper turning, q.c.t.p., 3- & 4-jaw chucks, steadies COLCHESTER Triumph VS2500 x 1,250mm Gap Bed Centre Lathe. 400mm swing x 1,250mm b.c., DRO, taper turning, q.c.t.p., 3- & 4-jaw chucks, steadies

Lathes - general
HARRISON Alpha 1550XT x 2,000mm CNC/Manual Lathe (2010) HARRISON Alpha 1550XT x 2,000mm CNC/Manual Lathe (2010)
GE/Fanuc 0i Mate-TC control, 554mm swing x 2,000mm b.c., 3-jaw chuck, q.c.t.p., 3-point steady. Very good condition.
Lathes - general
COLCHESTER TRIUMPH 2000 x 750mm Gap Bed Centre Lathe COLCHESTER TRIUMPH 2000 x 750mm Gap Bed Centre Lathe
390mm swing x 750mm b.c., Q.C.T.P., 3 & 4 Jaw chucks, Taper turning.
Lathes - general
WEBSTER BENNETT 48″EV Vertical Turret Lathe WEBSTER BENNETT 48″EV Vertical Turret Lathe
Class Borers Type Vertical Turret Lathe Year 1980’s Stock Control 3505 Price (Price On Application) Description WEBSTER BENNETT 48″EV Vertical Turret Lathe WEBSTER BENNETT 48″EV Vertical Turret Lathe Dia. of chuck: 48″ Admits in...
Lathes - general
SKODA SUA125P Heavy Duty Universal Centre Lathe (1983) SKODA SUA125P Heavy Duty Universal Centre Lathe (1983)
Swing over bed 1,320mm, dist b.c. 11,000mm, screw-cutting, swing over carriage 950mm, 0.9-350rpm, main motor 45kW
Lathes - general
HARRISON M400 CENTRE LATHE HARRISON M400 CENTRE LATHE
420mm X 1500MM ,GAP BED Spindle Bore: 65mm Spindle Speeds: 40 – 2000 RPM,FULL EQUIPMENT
Lathes - general
COLCHESTER Triumph 2500 VS COLCHESTER Triumph 2500 VS
Swing over bed 400mm x 1250mm between centres, gap bed,10hp, speeds to 2500rpm variable Full equipment ,dro.
Lathes - general
TOS SN 500S 500 x 1,500mm Gap Bed 12.5-2,000rpm TOS SN 500S 500 x 1,500mm Gap Bed 12.5-2,000rpm

Lathes - general
HARRISON Model M300 Centre Lathe HARRISON Model M300 Centre Lathe
330 x 650mm , 40-2,500rpm, with equipment. Ex-university
Lathes - general
COLCHESTER MASTIFF 1400 COLCHESTER MASTIFF 1400
535 X 2500MM ,GAP BED 90 MM SPINDLE BORE 18-1400RPM,EQUIPMENT
Lathes - general
COLCHESTER Mastiff 1400 Centre Lathe. 1,500mm b.c., gap bed, full equipment. £15,950 COLCHESTER Mastiff 1400 Centre Lathe. 1,500mm b.c., gap bed, full equipment. £15,950

Lathes - general
SMART & BROWN Model 1024 Centre Lathe. 280mm swing x 610mm, 30-2,500rpm, with equipment. £3,750 SMART & BROWN Model 1024 Centre Lathe. 280mm swing x 610mm, 30-2,500rpm, with equipment. £3,750

Lathes - general
LORCH Model LAS Centre Lathe. Year 1976, centre height 65 x 280mm between centres, spindle bore 10mm, 2 speeds 33-3,000rpm, lots of equipment. £4,750 LORCH Model LAS Centre Lathe. Year 1976, centre height 65 x 280mm between centres, spindle bore 10mm, 2 speeds 33-3,000rpm, lots of equipment. £4,750

Lathes - general
SMART & BROWN Model 1024 Centre Lathe . 280mm swing x 610mm, 30-2,500rpm, with equipment. £3,750 SMART & BROWN Model 1024 Centre Lathe . 280mm swing x 610mm, 30-2,500rpm, with equipment. £3,750

Lathes - general
MATCHMAKER AHL 2140 Gap Bed Centre Lathe MATCHMAKER AHL 2140 Gap Bed Centre Lathe
Year 2012. Swing over bed 21in, dist b.c. 40in, swing in gap 27in, spindle bore 75mm, spindle speeds x 4 ranges 18-1,600rpm. With equipment
Lathes - general
COLCHESTER  Mastiff 1400. 1,500mm bs gap bed. COLCHESTER Mastiff 1400. 1,500mm bs gap bed.
Full equipment. Immaculate. Hardly used
Lathes - general
Excellent COLCHESTER Mascot 1600 x 100in Gap Bed Imp. Excellent COLCHESTER Mascot 1600 x 100in Gap Bed Imp.
C/w 3- & 4-jaw chucks, q.c.t.p. & holders, heavy duty steady, lo-vo-lite, excellent slides & headstock. Original paint from new. POA
Lathes - general
Ex-College COLCHESTER Triumph VS 2500 x 30in Imp Gap Bed Lathe Ex-College COLCHESTER Triumph VS 2500 x 30in Imp Gap Bed Lathe
Excellent condition. Serial # LVT 25GMRJA/05408. C/w 3- & 4-jaw chucks, chuck guard, q.c.t.p. & holders, lo-vo-lite, coolant, bedstop. Extra accessories available: DRO, Ainjest, copy unit, etc. To be cleaned & serviced. Warranty....
Lathes - general
COLCHESTER Mascot 1600 x 80in Gap Bed Imp. COLCHESTER Mascot 1600 x 80in Gap Bed Imp.
C/w 3- & 4-jaw chucks, 2-axis Anilam DRO, quick change toolpost & holders, heavy duty stationary padded steady, lo-vo-lite. Very good slides & headstock. Original paint from new. Warranty. POA
Lathes - general
XYZ Trainer 1330 XYZ Trainer 1330
Low cost manual turning on a quality built lathe. SWING OVER BED 330mm BETWEEN CENTRES 750mm FULLY EQUIPPED
Lathes - general
XYZ 1550 VS XYZ 1550 VS
Fully equipped and ready to go. SWING OVER BED 390mm BETWEEN CENTRES 1250mm FULLY EQUIPPED
Lathes - general
CAZENEUVE HBX 360BC LATHE CAZENEUVE HBX 360BC LATHE
Reference: TOU081 Model HBX 360 BC Serial number 4337B880322 Ø over the bed (mm) 360 Spindle bore (mm)37 Ø over cross-slides (mm) 190 Distance between-centers (mm) 750 Spindle speeds (Rpm) VAR 40-2500 Feeding speeds (mm/mn)...
Lathes - general
Set of Multifix Attachments for Lathes Set of Multifix Attachments for Lathes
x 30
Lathes - general
MEUSER MVIB 620 x 7000 Lathe MEUSER MVIB 620 x 7000 Lathe
Reference: TOU072 Model MVI B 620 Weight admitted (T) 16 Distance between-centres 7,000mm Ø over the bed 1,240mm Ø over cross-slides 850mm Spindle bore 112mm Ø in gap bed 1,600mm Bed width 770mm Spindle speeds 18/8-400rpm Main...
Lathes - general
CAZENEUVE HB 500x2000 Lathe CAZENEUVE HB 500x2000 Lathe
Reference: TOU122 Model HB 500 Dia over the bed (mm) 500 Spindle bore (mm) 51 Distance between-centers (mm) 2000 Dia over cross-slides (mm) 200 Spindle speeds (Rpm) 20-2500 Feeding speeds (mm/mn) 0,009-5,6 Machine equipped with : DRO... With video
Lathes - general
ERNAULT-SOMUA CHOLET 435 X 1000 LATHE ERNAULT-SOMUA CHOLET 435 X 1000 LATHE
Reference: TOU126 Model CHOLET 435 Ø over the bed (mm) 410 Spindle bore (mm) 52 Distance between-centers (mm) 1000 Ø over cross-slides (mm) 230 Bed width (mm) 312 Spindle speeds (Rpm) 8/32-1600 Feeding speeds (mm/mn) L28/0.05-0.7... With video
Lathes - general
CAZENEUVE HB 575 x 2000 Lathe CAZENEUVE HB 575 x 2000 Lathe
Reference: TOU131 Model HB 575 Ø over the bed (mm) 575 Spindle bore (mm) 51 Distance between-centers (mm) 1000 Ø in gap bed (mm) 750 Width of gap bed (mm) 235 Ø over cross-slides (mm) 300 Spindle speeds (Rpm) 20-2500 Feeding speeds...
Lathes - general
GISHOLT N4 Turret Lathe GISHOLT N4 Turret Lathe

Lathes - general
ZUBAL AP 250 X 1500 Lathe ZUBAL AP 250 X 1500 Lathe
Reference: TOU130 Model AP 250 YOM Rebuilt in 1989 Ø over the bed (mm) 500 Spindle bore (mm) 51 Distance between-centers (mm) 1500 Ø in gap bed (mm) 750 Width of gap bed (mm) 240 Ø over cross-slides (mm) 320 Machine equipped with : Steady...
Lathes - general
CARLTON Cicinnati Heavy duty radial drilling machine CARLTON Cicinnati Heavy duty radial drilling machine
Reference: RAD001 Model CARLTON CINCINNATI 7 Spindle stroke (mm) 450 Table size (mm) 2200x1300 Distance between table-tool (mm) 1900 Spindle Ø (mm) 100 Spindle attachment (MT) 7 Max radius (mm) max 2700 Arm length (mm) 2300 Spindle speeds...
Lathes - general
OKUMA LS 60 x 11½in Gap Bed. DRO. £5,250 OKUMA LS 60 x 11½in Gap Bed. DRO. £5,250

Lathes - general
COLCHESTER Mastiff 1400. 10½in x 60in gap bed, 18-1,400rpm. £6,250 COLCHESTER Mastiff 1400. 10½in x 60in gap bed, 18-1,400rpm. £6,250

Lathes - general
HARRISON M390 50in x 705in HARRISON M390 50in x 705in
25-2,000rpm, DRO £7,250
Lathes - general
HARDINGE HC-2 HIGH PRECISION TURRET LATHE HARDINGE HC-2 HIGH PRECISION TURRET LATHE
Inf var speeds 125 – 3000 RPM. £2250.00
Lathes - general
OKUMA LS 60in x 10½in Straight Bed. Speeds 35-1,800rpm. £4,850 OKUMA LS 60in x 10½in Straight Bed. Speeds 35-1,800rpm. £4,850

Lathes - general



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy