Serv and Cap top banner

rss

Category: Presses and drop stamps

stamping press, forming press

Hand Presses Hand Presses

Presses and drop stamps
NORTON 4DB Deep Throat Flypress NORTON 4DB Deep Throat Flypress
Clearance to rear of throat 250mm, with corner notching tool. £395+vat (bench available)
Presses and drop stamps
NORTON 5tp12 Flypress NORTON 5tp12 Flypress
12in under the tool, ’V’ bending tool. £395+vat (bench available)
Presses and drop stamps
Single-Column Eccentric Press HEILBRONN, REP 200. YOM 1988 Single-Column Eccentric Press HEILBRONN, REP 200. YOM 1988
Capacity 200-t, table 1,100 x 850mm, throat 450mm, installation height 500mm, ram surface 800 x 600mm, ram adjustment 110mm, stroke 30-140mm, 45 strokes/minute With video
Presses and drop stamps
Used Norton No.5 Flypress Used Norton No.5 Flypress
Used Norton No.5 Flypress, Throat 140mm, 200mm daylight, mounted on a steel table. (central bung missing)
Presses and drop stamps
RHODES RF60 Power Press RHODES RF60 Power Press

Presses and drop stamps
Sweeney & Blocksidge Bar Press Sweeney & Blocksidge Bar Press
For latest offer please call on 0191 410 5886
Presses and drop stamps
Jones Shipman Arbour Press -  L10505.05 Jones Shipman Arbour Press - L10505.05
For latest offer please call on 0191 410 5886 Type 8600-001 Capacity 42cm (16 1/2”) daylight (15 ½” with base plate fitted) 20cm (8”) throat 1 ¾” SHAFT 23cm (9”) diameter table
Presses and drop stamps
HARE 5BS Hydraulic Press HARE 5BS Hydraulic Press
7.5-ton capacity, table 18in x 11in
Presses and drop stamps
CINCINNATI MILACRON HME GH 30  POWER PRESS CINCINNATI MILACRON HME GH 30 POWER PRESS
30 TON CAPACITY,OBI,FIXED GUARD ,30 TON CAP CHOICE OF 3 MACHINES.
Presses and drop stamps
TOGGLE PRESSES TOGGLE PRESSES
One small, one large. POA
Presses and drop stamps
JONES & SHIPMAN Geared Arbor Press JONES & SHIPMAN Geared Arbor Press
Bench mounted, 20in between uprights, daylight 24in. £1,650
Presses and drop stamps
BRET C-Frame Press BRET C-Frame Press
125-ton, variable stroke
Presses and drop stamps
RHODES/GILL 20-ton Hydraulic Press. RHODES/GILL 20-ton Hydraulic Press.
20in x 18in platen, interlocked guard. £2,500
Presses and drop stamps
GALLI Model 50 MTL 250-125-15 Mechanical Double Sided Progression/Blanking Press GALLI Model 50 MTL 250-125-15 Mechanical Double Sided Progression/Blanking Press
Accessories: Hydraulic Overload Protection Rising Screen Operator Guards SICK C4000 Light Guards to the front Cattaneo Combined Servo Straightener Feeder Model RE95-350 Capacity 350 x 7mm Year 1999 Cattaneo Single Sided Motorised Decoiler...
Presses and drop stamps
GALLI Model 40 MTL 300-125-15 Mechanical Double Sided Progression/Blanking Press GALLI Model 40 MTL 300-125-15 Mechanical Double Sided Progression/Blanking Press
Accessories: Hydraulic Overload Protection Rising Screen Operator Guards SICK C4000 Light Guards to the front Cattaneo Combined Servo Straightener Feeder Model RE95-350 Capacity 350 x 7mm Year 1998 Cattaneo Single Sided Motorised Decoiler...
Presses and drop stamps
LVD Mechanical Double Sided Press Model UHS500-2500-1400 LVD Mechanical Double Sided Press Model UHS500-2500-1400
double Capacity 5000kn Stroke 12" Speed 30 spm Complete with: Dimeco single sided decoiler with coil car Dimeco leveller Dimeco servo roll feed
Presses and drop stamps
CHIN FONG Straight Side Double Crank GTX-300 CHIN FONG Straight Side Double Crank GTX-300
--- UNIQUE OPPORTUNITY --- --MACHINES LIKE NEW AND NEVER USED IN PRODUCTION -- Year of manufacture: 2010 Force: 300 ton Stroke length: 300 mm Bolster Area: 2500 x 1500 mm Slide Area: 2200 x 1400 mm Die Height: 520 mm Slide Adjustment: 120...
Presses and drop stamps
CHIN FONG model OCP-45 CHIN FONG model OCP-45
Capacity 45 ton, Stroke length 110mm, Bolster Area 850 x 440mm, Slide Area 430 x 350mm, Die Height 270 mm, Slide Adjustment 60 mm, Speed 50-85 s.p.m, Rating point 3.2mm, Motor 5.5kw x 4p. Complete with: Sick Light Guards, Hydraulic overload...
Presses and drop stamps
Aida model NC1-35(2) Open Fronted Power Press Aida model NC1-35(2) Open Fronted Power Press
Stroke 120mm, bed area 730 x 380mm, variable speed 55 to 105spm, hydraulic overload protection, interlock operator guards. Year 1992
Presses and drop stamps
Aida model NC1-60(2) Open Fronted Power Press Aida model NC1-60(2) Open Fronted Power Press
Stroke 140mm, bed area 870 x 520mm, speed 70spm, hydraulic overload protection, interlock operator guards, die cushion.
Presses and drop stamps
HME Model GH100 HME Model GH100
Adjustable stroke 1in to 6in, bed area 40in x 27in. Choice of four machines
Presses and drop stamps
AMADA Model TP150EX AMADA Model TP150EX
Stroke 175mm, bed area 1,250 x 750mm, variable speed 30 to 55spm. New in July 2000. C/w die cushion, hydraulic overload protection. Sick light guards, hydraulic clamping, tool loading rails.
Presses and drop stamps
Aida model NC1-200 Aida model NC1-200
200 Ton, Open Fronted, Wet Clutch & Brake Power Press complete with Servo Feed & Coil Line
Presses and drop stamps
Aida model NC1-150 Aida model NC1-150
150 Ton, Open Fronted, Wet Clutch & Brake Power Press
Presses and drop stamps
Bentley model G7 - 200 Ton Bentley model G7 - 200 Ton
Friction Clutch, Ring Frame Power Press
Presses and drop stamps
HME-Bentley model AH40 HME-Bentley model AH40
40 Ton, Four Pillar H Frame Adjustable Stroke, Un-Geared, Hydragrip Clutch & Brake Power Press
Presses and drop stamps
HME model GH75 HME model GH75
75 Ton, Open Fronted, Adjustable Stroke, Un-Geared, Hydragrip Clutch & Brake Power Press
Presses and drop stamps
HME GP55 HME GP55
Fully reconditioned HME GP55 - 55 ton open fronted adjustable stroke power press
Presses and drop stamps
HME model GP55 HME model GP55
Fully reconditioned HME model GP55 - 55 ton open fronted adjustable stroke power press
Presses and drop stamps
HME model GP40 power press HME model GP40 power press
Fully reconditioned HME model GP40 - 40 ton open fronted adjustable stroke power press
Presses and drop stamps



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy