UT.MA LC 35E Grinding machine
This UT.MA LC 35E Grinding machine was built in the year 2009. It is equipped with a Packard Bell control unit. It operates with a grinding spindle speed range between 0 - 6000 rpm. This 4 axis machine includes an exhaustion system, a water tank and...
Grinding DANOBAT 1200 RH Grinding Machine
This DANOBAT 1200 RH Grinding Machine was manufactured in the year 1980. This machine can work with a maximum swing diameter of 540 mm and a maximum grinding diameter of 260 mm. [Ref: ES-GRI-DAN-1980-00002]
Grinding Estarta 301 Grinding Machine
This Estarta 301 Grinding Machine was made in the year 1975. This machine can operate with a max grinding diameter of 50 mm and a grinding wheel speed of 1950 rev/min. [Ref: ES-GRI-EST-1975-00001]
Grinding SAACKE UWIE 208485 Grinding Machine
This SAACKE UWIE 208485 Grinding Machine was made in 2002 in Germany. This machine incorporates a spindle speed range between 2000 - 10000 rpm, includes a grinding spindle power of 7 kW and a clamping on both sides HSK-C50. Completely retrofitted in...
Grinding ERNST E M 5 N II + 2F Grinding Machine
This ERNST E M 5 N II + 2F Grinding Machine was manufactured in the year 2001. This machine has approximately 28000 working hours. It presents a table dimension of 1380 x 70 mm of workpieces. [Ref: LT-GRI-ERN-2001-00001]
Grinding LISSMAC SBM-XS 300 Grinding Machine
This LISSMAC SBM-XS 300 Grinding Machine was manufactured in 2017 in Germany. It has only 570 working hours, like new. This machine works with a max. plate dimensions of 200 x 200 x 15 mm (grinding of both sides) and includes a set of completely new...
Grinding GER C 600 Grinding Machine
This GER C 600 Grinding Machine was built in the year 1998, and Fully mechanically rebuilt 2022. It is controlled by a Fagor control unit. This machine has a distance between points 500 mm, and a maximum diameter to rectify 275 mm. [Ref:...
Grinding Schneider DFS-4 Grinding Machine
This Schneider DFS-4 Grinding Machine was retrofitted in the year 2011. It is controlled by a Mitsubishi control unit. This machine has a workpiece weight of 2000 kg. [Ref: ES-GRI-SCH-2011-00001]
Grinding HAAS Multigrind - HT Grinding Machine
This HAAS Multigrind - HT Grinding Machine was manufactured in the year 2006. The machine has approximately 44520 working hours. It is equipped with a Siemens 840D control unit and works with a spindle speed up to 10000 rpm. [Ref:...
Grinding Refurbished CHURCHILL Plain Cylindrical Grinding Machine complete with Hollow Spindle Workhead & Internal Attachment. POA
Swing over top table 28in, dist b.c. 120in. Machine will be refurbished and complete with updated electrics and painted to your required colours. Delivery will be approx 12 weeks. 3-point grind thru steady available at extra cost if...
Grinding Refurbished CHURCHILL Plain Cylindrical Grinding Machine complete with Hollow Spindle Workhead. POA
Swing over top table 28in, dist b.c. 99in. Machine will be refurbished and complete with updated electrics and painted to your required colours. Delivery will be approx 12 weeks. 3-point grind thru steady and internal attachment available at...
Grinding REFURBISHED CHURCHILL PLAIN CYLINDRICAL GRINDER 28" x 120"
Refurbished Churchill Plain Cylindrical Grinding Machine. Swing over top table 28", distance between centres 120". Machine complete with Hollow Spindle workhead & Internal Attachment. Machine will be refurbished and complete with updated electrics...
Grinding USED CHURCHILL PLAIN CYLINDRICAL GRINDING MACHINE 20" x 120"
Churchill Plain Cylindrical Grinding Machine - swing over top table 20" and distance between centres 120" Fully run and checked.
Grinding REFURBISHED CHURCHILL PLAIN CYLINDRICAL GRINDING MACHINE 28" x 99"
Refurbished Churchill Plain Cylindrical Grinding Machine. Swing over top table 28", distance between centres 99". Machine complete with Hollow Spindle workhead. Machine will be refurbished and complete with updated electrics and painted to your...
Grinding 1200mm x 400mm Surface Grinder
Manufacturer: DANOBAT Model: RT 1200 Capacity: 1200mm x 400mm Table size: 1200mm x 350mm X axis travel: 1200mm Y axis travel: 400mm - 600mm Z axis travel: 400mm Motor: 10 HP Stone size : 300mm x 30mm Magnetic chuck: 1200mm x...
Grinding Tos SK12
Make: tos Type: piston-grinder Model: SK 12 Min. grinding height (mm): 800 Max. grinding diameter (mm): Ø 1400 Volts: 380v Cycles: 50 [Ref: tos-sk12]
Grinding Churchill TWR
Make: churchill Type: roll-grinder Model: TWR Machine number: 23661 Centre distance (mm): 6000 Max. grinding diameter (mm): 1520 Grinding wheel diameter (mm): 660 Grinding wheel thickness (mm): 50 [Ref: roll-grinder-churchill-twr-10-769f]
Grinding Tos BUC63A
Make: tos Type: hydraulic-universal-cylindrical-grinder Model: BUC63A Machine number: 0287298 Centre distance (mm): 4000 Max. grinding diameter (mm): 630 Max. load (kg): 3000 Grinding wheel diameter (mm): 750 Grinding wheel thickness (mm):...
Grinding Tos BUA63
Make: tos Type: hydraulic-universal-cylindrical-grinder Model: BUA 63A Machine number: 021485 Centre distance (mm): 3000 Max. grinding diameter (mm): 720 Max. load (kg): 2000 Grinding wheel diameter (mm): 750 kW: 20 Volts: 380v Cycles:...
Grinding Wendt Diatos 602
Make: wendt Type: roll-grinder Model: Diatos 602 Machine number: 8.82220/13/02 Control: X-As. Diatos 602 Centre distance (mm): 2000 Max. grinding diameter (mm): 660 Max. load (kg): 1500 Grinding wheel diameter (mm): 400 kW: 12/22/30 Volts:...
Grinding Tos BUC63A
Make: tos Type: hydraulic-universal-cylindrical-grinder Model: BUC 63A Machine number: 0268447 Centre distance (mm): 4000 Max. grinding diameter (mm): 630 Grinding wheel diameter (mm): 750 Grinding wheel thickness (mm): 100 kW: 15 R.P.M....
Grinding Farrel Giustina
Make: farel-giustina Type: hydraulic-cylindrical-grinder Control: Siemens Simatic OP3 Centre distance (mm): 4000 Max. grinding diameter (mm): 800 Min. grinding diameter (mm): 240 Grinding wheel diameter (mm): 800 Grinding wheel thickness...
Grinding Tos BUC63A
Make: tos Type: hydraulic-universal-cylindrical-grinder Model: BUC 63A Machine number: 02-08-369 Centre distance (mm): 3000 Max. grinding diameter (mm): 630 Max. load (kg): 2500 Grinding wheel diameter (mm): 750 Grinding wheel thickness...
Grinding Tos BUA63
Make: tos Type: hydraulic-universal-cylindrical-grinder Model: BUA 63 Machine number: 0227492 Control: Siemens 802D Centre distance (mm): 3000 Max. grinding diameter (mm): 630 Grinding wheel diameter (mm): 750 Grinding wheel thickness (mm):...
Grinding Favretto FR 125/110
Make: farel-giustina Type: hydraulic-universal-cylindrical-grinder Model: FR 125 / 110 Machine number: FR 3000 / N3396 Max. grinding length (mm): 3000 Max. grinding width (mm): 1250 Max. grinding height (mm): 1100 Max. load (kg): 1050 Table...
Grinding Waldrich 20 FS
Make: waldrich Type: roll-grinder Model: 20 FS Max. grinding length (mm): 3000 Max. grinding width (mm): 750 Max. grinding height (mm): 750 Max distance between columns (mm): 900 [Ref: hydraulic-bedway-surface-grinder-waldrich-20-fs]
Grinding Ziersch Baltrusch
Make: ziersch-baltrusch Type: universal-heavy-duty-roll-grinder Model: Formmaster 8/40 Machine number: 48B A40 Max. grinding length (mm): 1400 Max. grinding width (mm): 400 Max. grinding height (mm): 750 Magnetic chuck (mm): 400 x 800 Table...
Grinding Blanchard 36D60
Make: blanchard Type: cnc-roll-grinder Model: 32D60 Max. grinding height (mm): 630 Magnetic chuck (mm): Ø 1525 Max. swing (mm): Ø 1800 Max. load (kg): 4500 Grinding wheel diameter (mm): Ø 900 (segmented) HP: 75 Volts: 380v Cycles:...
Grinding Blanchard 11-16
Make: blanchard Type: cnc-roll-grinder Model: 11-16 Machine number: 10345 Max. grinding height (mm): 180 Magnetic chuck (mm): Ø 40,6 HP: 15 [Ref: rotary-surface-grinder-blanchard-11-16-11-892gg]
Grinding Mattison N.N.
Make: mattison Type: hydraulic-universal-cylindrical-grinder Model: NN Machine number: 23569 Max. grinding length (mm): 4650 Max. grinding width (mm): 610 Min. grinding height (mm): 800 Table size (mm): 610 x 5850 Grinding wheel diameter...
Grinding Naxos Union KM630-3250
Make: naxos-union Type: hydraulic-cylindrical-grinder Model: KM 630 - 3250 Machine number: 36624 Max. grinding length (mm): 3250 Max. grinding diameter (mm): Ø 630 Grinding wheel diameter (mm): Ø 900 kW: 22 Volts: 220v Cycles: 50 [Ref:...
Grinding Kapp VAS 433
Make: kapp Type: cnc-gear-grinder Model: VAS 433 Max. grinding length (mm): 500 Max. grinding diameter (mm): Ø 300 R.P.M.: 5.000 - 25.000 kW: 15 Volts: 380v Cycles: 50 [Ref: cnc-gear-grinder-kapp-vas-433-11-770i]
Grinding Overbeck 6101-CNC
Make: overbeck Type: cnc-internal-grinder Model: 6101-CNC Machine number: 66257 Control: Marpos E9034 Max. grinding diameter (mm): 800 Max. swing (mm): over grinding table Ø 600 R.P.M.: 6.000 - 45.000 kW: 4 [Ref: cnc-internal-grinder-overbe...
Grinding Hauser 3SM
Make: hauser Model: 3SM-DR Machine number: 9970-2300.4501 Table size (mm): 320 x 590 R.P.M.: 9000 - 250000 [Ref: hauser-3sm-12-113i]
Grinding Favretto FR80
Make: favretto Type: hydraulic-cylindrical-grinder Model: FR 80 70 500 Machine number: 3090 Max. grinding length (mm): 5000 Max. grinding width (mm): 800 Max. grinding height (mm): 900 Table size (mm): 800 x 5150 Max distance between columns...
Grinding Afnor Anor Najor
Make: afnor-anor Type: conventional-knife-grinder Model: Najor Machine number: 2188 Max. grinding length (mm): 3000 Max. grinding width (mm): 280 Max. grinding diameter (mm): 300 kW: 15 Volts: 380v Cycles: 50 [Ref: afnor-anor-najor-11-584i1...
Grinding Elb SWN6-NCK
Make: elb Type: universal-heavy-duty-roll-grinder Model: SWN6-NCK Max. grinding length (mm): 600 Max. grinding height (mm): 400 Magnetic chuck (mm): 600 x 300 Table size (mm): 900 x 300 Grinding wheel diameter (mm): 300 Grinding wheel...
Grinding MSO KW 700
Make: mso Type: hydraulic-universal-cylindrical-grinder Model: KW 700 Centre distance (mm): 2000 Max. grinding diameter (mm): 700 Grinding wheel diameter (mm): 900 kW: 4 Volts: 380v Cycles: 50 [Ref: mso-kw-700-crankshaft-grinder]
Grinding Herkules UWS 450
Type: roll-grinder Model: UWS 450 Centre distance (mm): 6500 Max. grinding diameter (mm): 950 Max. load (kg): 18000 Grinding wheel diameter (mm): 750 kW: 65 Volts: 380v Cycles: 50 [Ref: herkules-uws-450-roll-grinder]
Grinding Schmaltz RGK 1000
Make: schmaltz Type: hydraulic-cylindrical-grinder Model: RGK 1000 Machine number: 31196 Max. grinding length (mm): 5000 Max. grinding diameter (mm): 250 Max. swing (mm): 1000 Max. load (kg): 2500 Grinding wheel diameter (mm): 1300 Grinding...
Grinding Hauser 3SM-DR
Make: hauser Type: jig-grinder Model: 3SM-DR Machine number: 9970-2300-4501 Max. grinding length (mm): 500 Max. grinding width (mm): 250 Min. grinding height (mm): 400 R.P.M.: 9000 - 250000 kW: 6 Volts: 380v Cycles: 50 [Ref:...
Grinding Jung HF 50 RD
Make: jung Type: hydraulic-cylindrical-grinder Model: HF 50 RD Machine number: 5885 Max. grinding length (mm): 500 Max. grinding width (mm): 200 Max. grinding height (mm): 400 Magnetic chuck (mm): 175 x 450 Table size (mm): 600 x...
Grinding Imperia U32
Make: imperia Type: hydraulic-cylindrical-grinder Model: U32 Machine number: 150.72 Max. grinding length (mm): 400 Max. grinding height (mm): 127 Table size (mm): 1040 x 185 Max distance between columns (mm): 600 Grinding wheel diameter...
Grinding Blanchard 2036 Vertical Spindle Rotary Surface Grinder 2036
Blanchard 2036 Vertical Spindle Rotary Surface Grinder with 36 Inch dia retractable mag chuck. 20 Inch dia solid wheel, 40 Hp Main Motor, Coolant in base. Serial number B40-8-567 [Ref: 106159]
Grinding Churchill Crankshaft Re-Grinding Machine Model CRM P1478 CRM
Churchill Crankshaft Re-Grinding Machine Model CRM P1478, Currently set as a straight approch grinder 110" Between Centres Spare x 24" Swing Over Table, Seperate Electrical Cabinet, 3 Steadies, Back Plate with Counter weights for crankshaft Chucks,...
Grinding Churchill HBX Internal Grinder, FB
Churchill HBX Internal Grinder, Fitted with 300mm 4 jaw chuck, 40mm spindle bore, 270mm Center Height, 540mm Swing Over Bed, 600mm Between Centres, 0.005mm Adjustment, Angular Head Adjustment, Coolant. [Ref: 340]
Grinding Delapena Auto Speedhone honing
Delapena Auto Speedhone, S/N 3143/22 .84HP, manuals and toolign in cabinet. [Ref: 106156]
Grinding Landis Model 3R Cylindrical Grinder 10 x 72inch
Landis Model 3R Cylindrical Grinder 10 x 72inch, fitted with 2.5 x 30 inch wheel, EAM Stop cut gauging. [Ref: 356]
Grinding Lumsden 91ML Vertical Spindle Rotary Surface Grinder
Lumsden 91ML Vertical Spindle Rotary Surface Grinder 36 Inch Dia Mag Chuck. 22 inch dia solid wheel, coolant tank. [Ref: 106153]
Grinding Lumsden 93ML Rotary Table Surface Grinder 93ML
LUMSDEN 93 ML Rotary Table Surface Grinder Serial Number: 93ML/103/13000 New 1996 Country of Origin: UK Possibly the last Lumsden ever made ! With auto sizing attachment, coolant and filtration unit. Segmental wheel dia ...
Grinding Matrix- Churchill Universal Cylindrical Internal Grinder Refurbished Matrix- Churchill
Matrix- Churchill Universal Cylindrical Grinder.  Refurbished in 2013 by Churchill Machine Tools.48 Inch between centres and 16 inch swing over bed.  angular adjustment to wheel head, angular adjustment to table, and angular adjustment to...
Grinding Clarkson Tool and Cutter Grinder serial number 14262
Clarkson Tool and Cutter Grinder serial number 14262, with manual, no accessories [Ref: 102]
Grinding Lapmaster 15 Bench Type Lapper
Lapmaster 15 Bench Type Lapper, with (9) spare lap plates. S/N 15413 [Ref: 106152]
Grinding ACRA 618HS Surface Grinder 618HS
ACRA 818HS Saddle Type Hydraulic Surface Grinder, equipped with Auto Down Feed of Head.Grinding Surface of Table, 200x450mmMax Grinding Surface Table, 200x450mmMax Dist. of spindle to table, 450mmTool Max Safety Table Load, 150kgsTable speed...
Grinding Gate 38-120 Cylindrical Grinder with Internal Gate
Gate 38-120 Cylindrical Grinder with Drop Down Internal Spindle, (3) Steadies, 380 Swing x 1200mm Between Centres, Wheelhead Traverse Length 250mm, Coolant , Hydraulic Pack, Dressing Attachment, (2) Wheel Arbours, metric graduations, made in Taiwan,...
Grinding JONES & SHIPMAN 1300 EIU Universal Cylindrical Grinder. Swing 254mm x 686mm
C/w mag chuck & 2-point steady
Grinding Jones & Shipman Model 540L
Extended height 406mm under a new wheel with power rise & fall, 18in x 6in mag chuck and coolant
Grinding JONES & SHIPMAN 540P Toolroom Surface Grinder
Capacity 18in x 6in, vertical movement 11in, max height under wheel 9¾in, size of wheel 7in x ½in, imperial dials, power r&f head, hyd table feed, auto cross feed, magnetic chuck, coolant tank included. £4,995+VAT
Grinding ALEXANDER 2CGD Tool & Cutter Grinder.
Bench mounted Some collets Good condition £1,250+VAT
Grinding DECKEL SO Tool & Cutter Grinder
Cabinet mounted Selection of collets Lovely condition £2,000+VAT
Grinding ALEXANDER 2CGD Tool & Cutter Grinder
Cabinet mounted Selection of collets Superb condition £1,500+VAT
Grinding JONES & SHIPMAN 540P SURFACE GRINDER
Capacity 18 x 6", magnetic chuck, dust extraction, coolant, power rise & fall to wheelhead
Grinding J & S 540P Surface Grinder with Diaform Attachment. £6,950

Grinding Ring Grinder ELB Rotary 80. Year 2000. Magnetic table 800mm

Grinding GIORIA RUP1000 Universal Cylindrical Grinder
Swing 700mm, centre height 350mm x 1,000mm between centres. C/w coolant
Grinding J&S 1011P Hydraulic Surface Grinder
Grinding capacity 27in x 12in, 12in under the wheel, magnetic chuck, coolant equipment, wheel dressing
Grinding Myford MG12 Cylindrical Grinder - L90723.05
Ref: L90723.05 PRICE (EX VAT) £3,850 MYFORD MG12 CYLINDRICAL GRINDER CAPACITY 3” (75mm) max grinding diameter 5” (125mm) swing over table 12” (305mm) max between centres 13 ½” (345mm) Max table travel POWER Three Phase...
Grinding JONES & SHIPMAN 540P SURFACE GRINDER - L80820.03
Ref: L80820.03 PRICE (EX VAT) WAS £7,750 NOW £6,950.00 JONES & SHIPMAN 540P SURFACE GRINDER Power Rise & Fall CAPACITY 18 x 6” (450 x 150mm table capacity) 11” (280mm) Vertical travel of wheel head Magnetic Chuck Diaform...
Grinding Jones & Shipman 310T Tool & Cutter Grinder - C51029.01
Ref: C51029.01 PRICE (EX VAT) £4,850 JONES & SHIPMAN 310T TOOL & CUTTER GRINDER with tilting and swiveling wheel head 60 degrees circular adjustment 360 degrees swivel in vertical plane 180 degrees swivel of motor in vertical plane 278mm...
Grinding Jones & Shipman 310 Tool & Cutter Grinder L10311.01
Price: £4,850 + VAT Manufacturer Jones & Shipman Model 310 tool and cutter grinder distance between tailstock centres 483mm (19”) distance between cutter head and right hand tailstock 356mm (14”) max diameter swing on standard...
Grinding JONES & SHIPMAN 1314 Universal Cylindrical Grinder
Swing 254mm x 457mm b.c, dual dials
Grinding ELB Surface Grinder. Capacity 800 x 500mm

Grinding Eagle Hand Operated Surface Grinder - L90723.07
£775.00 + VAT Manufacturer Eagle Table Size 18” x 6” (total including supports 32”) Table Travel Longitudinal Travel 20” Cross Travel 6” Vertical Travel 12” Under Wheel Head Power Three Phase Electric\'s
Grinding Chevalier Bench Top End Mill Grinding Machine L90723.10
PRICE: £1,375 + VAT Manufacturer Chevalier Model Bench Top End Mill Grinder Takes 5C Collets Power Three Phase Electrics
Grinding Jones & Shipman 1400 Surface Grinder (3684)
Jones & Shipman 1400 Surface Grinder, 600 x 200mm capacity, Wheel diameter 250mm, power rise & fall, Auto reversing saddle, Wheel dresser, 600 x 200mm magnetic chuck, Coolant & dust extractor, Imperial dials. With video
Grinding Newall 36? x 120? Universal Cylindrical Grinder
Newall 36? x 120? Universal Cylindrical Grinder 36? Swing Over Bed 120? Between Centres Swivel Work head Swivel Wheel head Swivel Bed Steady Rests Internal Attachment
Grinding JONES & SHIPMAN 1400 LAR
24 x 8in capacity, 24 x 8in magnetic chuck, extended height, automatic incremental down feed £9,750
Grinding NEWALL KU79 Universal Cylindrical Grinder
Swing 500mm, distance between centres 1,220mm, double-swivel wheelhead, drop-down internal. C/w 400mm mag chuck & coolant system
Grinding JONES & SHIPMAN Model 2001 Cylindrical Production Grinding Machine. Year 1985. Ref 29016

Grinding JONES & SHIPMAN 1400P Hydraulic Surface Grinder. Ref 28766

Grinding Internal Grinding VOUMARD 5A1000
Facing attachment, tooling. Year 1984
Grinding Surface Grinding LGB R1170. Cap 1,100 x 700mm.

Grinding HERKULES Cylindrical/Roll Grinding Machine WS 350 x 3,200mm
Max grinding dia 36in (915mm), min grinding dia 10mm (0.4in), max grinding length 3,200mm (128in), grinding wheel 750mm x 80mm x 305mm, wheel head speeds 40-1,500rpm
Grinding Cutter Master M0620 Bench Top Tool Grinder (3543)
Cutter Master M0620 Bench Top Tool Grinder, Max grinding dia 220mm. Max grind length 235mm, Air bearing fixure center height 123mm, Longitudial table travel 150mm, Workable cross travel 65mm. Max wheel dia 126mm, Tilt adjustment for wheelhead +30...
Grinding CHURCHILL BX SERIES 2 CYLINDRICAL GRINDER (12587)
CHURCHILL BX SERIES 2 CYLINDRICAL GRINDER Swing 20" x 40" Between Centres : Wheel 18" Diameter x 2" Wide : Heidenhain DRO : Coolant & Guards.
Grinding JONES & SHIPMAN 1302 Cylindrical Grinder. Capacity 14in x 27in. POA

Grinding JONES & SHIPMAN Model 1302 EIU Universal Cylindrical Grinder. Ref 28930

Grinding JONES & SHIPMAN 1011P SURFACE GRINDER (12585)
JONES & SHIPMAN 1011P SURFACE GRINDER Capacity 27" x 12" : Hydraulic Feeds : Power Elevation To Wheelhead : Wheelhead Mounted Dressing Attachment : Wheel Size 10" x 2" x 3" Bore : 24" x 8" Magnetic Chuck : Low Volt Light : Coolant.
Grinding JONES & SHIPMAN 540 Horizontal Surface Grinder
Capacity 18in x 6in. C/w fine pole magnetic chuck & coolant system
Grinding XYZ 1020 Surface Hydraulic Grinder
With 250mm x 500mm mag chuck, cool duster unit. YOM 2006
Grinding JONES & SHIPMAN 540P Surface Grinding Machine with 18in x 6in Magnetic Chuck. Ref 28938

Grinding JONES & SHIPMAN 1400 Grinder

Grinding Axminster 8" Bench Grinder (3503)
Axminster 8" Bench Grinder, model RBG200D, s/n 15040018, Single phase, 550w/2900rpm, 200/40/32mm wheels, Floor stand
Grinding PENICO Rotary Grinding Table
Converts Surface Grinders to rotary work Robust construction British manufactured
Grinding 2014 XYZ 1224 Surface Grinder

Grinding RCG 900 Cylinder Head Block Grinder. With brake disc attachment

Grinding TOMOCO Flywheel Grinder. 250mm magnetic chuck

Grinding Jones & Shipman 1302 EIU 2universal Cylindrical Grinder
Internal and full equipment Cap 14” x 27".
Grinding ELLESCO GRINDMASTER
GRINDING BELT 1800X 150MM , CONVEYOR THROUGH FEED 150MM , WITH DUST EXTRACTION
Grinding AJAX Model AJ600HD Surface Grinder
Year 1999. Table 260mm x 750mm, max horizontal travel 620mm, max cross travel 340mm
Grinding JONES & SHIPMAN Model 540
18 x 6in capacity with DRO, dust and coolant
Grinding JONES & SHIPMAN Model 1400L Increased Height Surface Grinder. 610 x 178mm capacity, with DRO. Year 1992

Grinding JONES & SHIPMAN Model 540 Hydraulic Surface Grinder. £4,750

Grinding UNION Tool & Cutter Grinder. Swing 6in x 16in between centres, swivel table, tooling. £950

Grinding JONES & SHIPMAN Model 1310 Universal Grinder. Full equipment. POA

Grinding JONES & SHIPMAN Model 310T Universal Tool & Cutter Grinder. Full equipment. POA

Grinding JONES & SHIPMAN Model 540P Surface Grinder. With optidress. POA

Grinding JONES & SHIPMAN 1400 LAR
Extended height, 24in x 8in capacity, 24in x 8in close pole magnetic chuck, power rise & fall, incremental down feed, auto reverse to saddle, coolant. S/n BO 93020 £10,000
Grinding JONES & SHIPMAN 1065 Universal Grinder
14in x 60in capacity, plus internal spindle, coolant tank. S/n BO 92898 £9,750
Grinding JONES & SHIPMAN 1307 Universal Grinder
14in x 40in capacity, variable speed head, plus internal spindle, coolant tank. S/n BO.76758 £7,750
Grinding XYZ 1224 Surface Grinder.
24in x 12in table. Year 2003
Grinding PERFECT Surface Grinder Model PFG-D4080AH
800mm x 400mm capacity, power rise & fall, automatic incremental downfeed, overhead wheel dresser, Acu-Rite digital read out. Year 2004 POA
Grinding JONES & SHIPMAN 1011P
27" x 12" CAPACITY. FITTED 24" x 10" MAGNETIC CHUCK. POWER RISE & FALL TO WHEEL HEAD COOLANT TANK.
Grinding JONES & SHIPMAN 1400AP
24" x 8" MAGNETIC CHUCK. INCREMENTAL DOWN FEED. 2 SPEED WHEEL HEAD. METRIC CALIBRATION. COOLANT. £7750.00
Grinding JONES & SHIPMAN 1400P
24 x 8in capacity, coolant, wheel balancer. £7,750
Grinding JONES & SHIPMAN 1430 LAR Surface Grinder
600 x 300mm magnetic chuck, power rise & fall to wheel head, incremental down feed, extended height column, auto reverse to table. £16,950
Grinding JONES & SHIPMAN 540L
HIGH RISE COLUMN, 18" x 6" CAPACITY. POWER RISE & FALL. OVER HEAD WHEEL DRESSER. COOLANT. £5950.00
Grinding CINCINNATI HEALD 273A Internal
Swivel head. Serial no. G3243. Year 1974 £12,750
Grinding Elliot 618 Surface Grinder
with 6” x 18” Magnetic Chuck, Power rise & fall wheel head. Ex University machine.
Grinding CHEVALIER FSG 1640 AD Surface Grinding Machine
Year 1998. Table size 1,000 x 400mm, grinding wheel size 445mm, traverses 400 x 1,000mm, max height from table to spindle centre 445mm, total power requirment 7.4kW. Plus automatic downfeed, wheel-mounted wheel dresser system,...
Grinding CHEVALIER FSG 1640 Surface Grinder

Grinding CINCINNATI 20M Centreless Grinder
Optimum diameter capacity 1-38mm, grinding wheel diameter 100mm, grinding wheel width 508mm, max grinding wheel speed 10,500sfpm, regulating wheel diameter 355mm. Plus hydraulic dressing on both wheels, spare grinding wheels, quantity...
Grinding OKAMOTO ACC 63DX Surface Grinding Machine
Year 2002. Automatic control, table size 600 x 300mm, grinding wheel size 355 x 38mm, traverses 750 x 340mm, max workpiece weight 420kg, max height from table to spindle centre 500mm, feed rate 0.3-25m/min, spindle motor power 3.7kW,...
Grinding JONES & SHIPMAN 1411 Surface Grinder
Table size 700 x 300mm, magnetic chuck size 600 x 200mm, longitudinal grinding limit 685mm, transverse table movement grinding limit 305mm, vertical traverse of wheelhead max 310mm, feeds: cross feed, hand graduated in 0.02mm, hand...
Grinding CHURCHILL Model D Heavy Duty Cylindrical Grinder
Swing over bed 30” (762mm). Distance between centres 120” (3048mm) . Maximum dia. of Grinding Wheel 30” (762mm) . Grinding wheel speeds 730 rpm. Dia. Of Workhead faceplate 20” (508mm). Work head speeds 10, 14, 19, 26, 35, 49, 66, 90 rpm. Table...
Grinding JONES & SHIPMAN 1302 Cylindrical Grinder
Maximum Swing 355 mm. Distance Between Centres 685mm
Grinding WARD Tool and Cutter Grinder
Emergency Stop. Lo volt Light
Grinding CHRISTEN Tool and Cutter Grinder
Type 2-32/100A Angles 60 – 180 Degrees. Grinding Wheel Size 150mm x 40mm. Spare Wheel Arbors. Pilot Relieving Attachment. Radial Relief Grinding. Four Facet Grinding. Split Point Grinding. Point Thinning. Step Drills.Pilot Relieving. Flat Step...
Grinding WALDRICH SEIGEN Model WSIIa850 Roll Grinding Machine
Swing 1100mm x 3500mm Between Centres. 2 x Steadies. Mechanical rebuilding almost complete. Being retrofitted with new CNC system.
Grinding RJH BISON Double-Ended Grinder
With 12in wheel. POA
Grinding JUBILEE G10 Double-Ended Grinder
10in wheels. POA
Grinding UNION Double-Ended Grinder
14in wheels. POA
Grinding JONES & SHIPMAN 1307 Universal Cylindrical Grinder
Swing 356mm x 1,016mm. C/w equipment. POA
Grinding JONES & SHIPMAN 1307 Universal Cylindrical Grinder. Swing 356mm x 1,016mm. C/w equipment. POA

Grinding JAKOBSEN SJ16 Hydraulic Surface grinder
Capacity 800 x 300mm. C/w power rise & fall with incremental down feed
Grinding JONES & SHIPMAN 1307 EIU Universal Cylindrical Grinder. Swing 356mm x 1,016mm. C/w equipment. POA

Grinding UNION GU 16 Grinder
Wheel size 406 x 50mm. C/w coolant system & extraction unit
Grinding AJAX AJ 500HD Hydraulic Surface Grinder
Capacity 500 x 250mm. With incremental downfeed, DRO
Grinding OKAMOTO ACC 65DX Surface Grinding. Cap 600 x 500mm

Grinding Ring Grinder ABWOOD RT300. Magnetic table, 300mm horizontal wheel

Grinding AMC Cylindrical Grinding Cap 3,000 x 680mm, tooling

Grinding REISHAUER US Thread Grinding Cap 450 x 250mm

Grinding REISHAUER NRK Thread Grinding

Grinding JONES &SHIPMAN 1074 1076 Universal Grinder. With digital and internal

Grinding GLEASON 120 Curvic Coupling Grinding

Grinding Internal Grinding VOUMARD NR 5

Grinding Curvic Coupling Grinding GLEASON Type 130

Grinding GOCKEL 6,000mm Grinder

Grinding JONES & SHIPMAN 1074 Universal Grinding
Digital, internal spindle
Grinding Duplex Grinding DISKUS DDS600RA. Rotary feed, wheels 600mm

Grinding Internal Grinding VOUMARD 5ALP1000

Grinding REISHAUER RZ300E Gear Grinder

Grinding KEHREN RW 7 Ring Grinder
Magnetic Table 700mm
Grinding GER Horizontal Surface Grinder
Cap 1,000 x 500mm
Grinding KELLENBERGER 600U125 Universal Grinder. Cap 600 x 250mm with internal spindle tooling

Grinding Horizontal Surface Grinder ELB, SWN 8 NC-K, 1985

Grinding CNC Horizontal Surface Grinder BRAND, FS 1240 CNC, 1990, Elesta Poselesta II

Grinding JONES & SHIPMAN 540 Surface Grinding Machine. 18in x 6in magnetic chuck

Grinding ABWOOD RG1-30 Horizontal Spindle Rotary Table ‘Ring’ Grinding Machine
30in/750mm max grinding diameter, 168mm under wheel, overhead dresser, hand wheel unit, magnetic chuck, coolant
Grinding ANDMAR 618AHR Surface Grinding Machine (1995)
150 x 450mm capacity, magnetic chuck, auto reversing saddle, coolant and dust
Grinding JONES & SHIPMAN 1400AP Surface Grinding Machine (1982)
24in x 8in capacity, magnetic chuck, auto downfeed, power rise and fall.
Grinding JONES & SHIPMAN 1302EIU Universal Grinding Machine
20in x 27in capacity, internal spindle, chucks, DRO. Fully overhauled by Andmar 2013. Raised centre height. New Coborn workhead and wheelhead spindles. Excellent condition.
Grinding JONES & SHIPMAN 1302EIU Universal Grinding Machine
14in x 27in capacity, internal spindle, chucks, steadies. Very good condition
Grinding ANDMAR (SEEDTEC) 6128AHR Surface Grinder (1995)
6in x 18in capacity, magnetic chuck, auto reversing saddle, coolant and dust.
Grinding Herkules Heavy Duty Cylindrical Grinder
Max Swing: 915mm Max Grinding Length: 3200mm Grinding Wheel: 750mm x 80mm x 305mm Wheel Head Speed: 40-1500 RPM (Variable) Work Head Speed: 6-45 RPM (Variable) Machine With: Various Steadies Coolant & Clarifier Balancing Stand
Grinding Churchill FB Cylindrical Grinder
Churchill FB Cylindrical Grinder Capacity: 42” x 12’ (1050 x 3600mm) Machine with: Linishing attachment 3 x steadies
Grinding LUMSDEN 90ML Vertical Spindle Rotary Grinder. Magnetic chuck 610mm dia. POA

Grinding JONES & SHIPMAN 540P. 18in x 6in mag chuck, coolant. £4,250

Grinding MAJEVICA 450mm x 250mm H.S. Surface Grinder. £3,500

Grinding Various double-ended grinders always in stock

Grinding Seedtec YSG 610 AHR Hydraulic Surface Grinder Ex College #78281
Power Rise and Fall Magnetic Chuck Dust Extractor Coolant #78281 £5,950 + VAT
Grinding Union G14 Double Ended Grinder #78337
Maximum Wheel Dia’ 350mm Fitted With Brake #78337 £675 + VAT
Grinding Heavy Duty Double Ended Grinder #78326
Heavy Duty Double Ended Grinder Maximum Wheel Dia’ 300mm #78326
Grinding SNOW OS25/6 Horizontal Spindle Surface Grinder
Magnetic chuck 600 x 2,500mm, max height under wheel 600mm, power rise & fall, coolant, Darenth filtration. Serial number 8462
Grinding Lumsden 92ML Rotary Table Surface Grinder
Lumsden 92ML Rotary Table Surface Grinder Table Diameter 48? / 1219mm Segmental Wheel Dia. 28” / 711mm Max. Height Capacity 22.5? / 572mm Spindle Speed 550rpm Table Speed 6 & 18rpm Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min Spindle Motor...
Grinding Reform AR40 RM Face / Surface Grinder
Reform AR40 RM Face / Surface Grinder Max Grinding Length 400mm 12” Rotary Mag Chuck Tilt & Swivel Grinding Head
Grinding Snow OS60 Horizontal Spindle Surface Grinder
Snow OS60 Horizontal Spindle Surface Grinder Magnetic Chuck 10” x 60” Coolant Max Speed 1500rpm DRO
Grinding Churchill Model F Heavy Duty Cylindrical Grinder 34” x 156”
Churchill Model F Heavy Duty Cylindrical Grinder 34” x 156” Swing over bed 34”. Distance Between Centres 156” Overhaul Table Length Grinding wheel diameter 26” dia x 3”wide x 12”hub. Water coolant tank at rear with pump. 2 x Steadies.
Grinding Harrison (Union) Model GS16 Double Ended Tool Grinder
Harrison (Union) Model GS16 Double Ended Tool Grinder Max wheel size 16” Width of grinding wheel 2” Bore of wheel 1.25” Motor 2.2kw Work rest Wheel guards Coolant pump, tank and pipes
Grinding GRINDINGMASTER MCSB 600mm Wide Belt Grinder

Grinding ALEXANDER 2CGC TOOLROOM CUTTER GRINDER (12267)
ALEXANDER 2CGC TOOLROOM CUTTER GRINDER Cabinet Stand : 7 Collets.
Grinding SMART & BROWN TOOL & CUTTER GRINDER (12428)
SMART & BROWN TOOL & CUTTER GRINDER Capacity 12" x 6" : Centres : Universal Workhead & Sleeve : Finger Bracket : Spare Belt : Operators Manual : 3 Phase.
Grinding UNION DOUBLE ENDED GRINDER
UNION DOUBLE ENDED GRINDER 16" Diameter Wheels : 2 1/2" Wide : Eyeshields.
Grinding MARWIN TOOL GRINDER (11969)
MARWIN TOOL GRINDER Twin Station : Low Volt Light : Coolant.
Grinding JONES & SHIPMAN UJ1200 UNIVERSAL MOTORISED WORKHEAD (12552)
JONES & SHIPMAN UJ1200 UNIVERSAL MOTORISED WORKHEAD To Suit J&S 1300 / 1074.
Grinding ACC OKAMOTO 84 ST

Grinding ANDMAR 618 Toolmaker Surface Grinder

Grinding JONES & SHIPMAN 540 P with optidress and DRO. Excellent condition

Grinding JONES & SHIPMAN 1400 E Surface Grinder

Grinding JONES & SHIPMAN 1415 Surface Grinder

Grinding JONES & SHIPMAN 1400 E Surface Grinder C/w coolant

Grinding KITCHEN & WALKER E32 4ft Radial Arm Drill C/w box table

Grinding JONES & SHIPMAN 1400E Grinder. Very good condition

Grinding Snow HR 400 Ring grinder

Grinding JONES & SHIPMAN 540. C/w Optidress and DRO. Excellent condition

Grinding JONES & SHIPMAN 540L

Grinding JONES & SHIPMAN 540 P
Magnet: 14 x 6 Complete with Dust extraction Metric calibration Dust Condition: Excellent to Pristine condition
Grinding JONES & SHIPMAN 1300 EIU2 Twin Wheel Double Swivel Mchine
Jones & Shipman 1300 EIU2 twin wheel double swivel machine.
Grinding JONES & SHIPMAN 540 AP Surface Grinder

Grinding MOORE 2C Jig Grinder

Grinding JAKOBSEN 1026 Surface Grinder

Grinding Universal Grinding KARSTENS K11. Capacity 1,000 x 520mm, internal

Grinding STUDER S20-2 AS NEW ONLY 3600 HOURS - 650mm CENTRES, IDEAL TOOLROOM GRINDER
AS NEW STUDER S20-2 WITH 650MM CENTRES, DIGITAL X AND Z DISPLAY, SENSITRON, AVAILABLE IN UK. AVAILABLE FOR RENT OR SALE. ANOTHER STUDER S20-2 WITH 400MM CENTRES ALSO AVAILABLE AS CURRENTLY LET COMING TO END. STUDER AG FACTORY TRAINED SERVICE...
Grinding STUDER S30 Universal Grinding

Grinding STUDER RHU 400c 125 Universal Grinding

Grinding SCHAUDT SA7 CNC Siemens 840 Cylindrical Grinding
Capacity 2,000 x 620mm
Grinding STUDER RHU 500 Universal Grinding

Grinding Surface Grinding PROTH PSGS 4080. Cap 800 x 400mm

Grinding BERGER Grinding Cell. With grinding robots Kuka KR 180 (external grinding A1)
Total weight about 6,300kg cell size: approx 4,650 x 2,400 x 3,100mm, 6-axis robot Kuka KR 180 R2500 Extra - year of production 2011, control KRC 4, additional axis (7-axis), station for belt grinding BSS10, max belt size 3,500 x...
Grinding Surface Grinding JONES & SHIPMAN 540L. Optidress, digital

Grinding Universal Grinding CC. Cap 2,000 x 400mm

Grinding Okamoto Grind-X ACC64CA-iQ CNC Surface Grinder
Only used as a demo machine and stored since! Just received. YOM 2010
Grinding Jones & Shipman 540L-P with extended column height, power rise & fall, coolant and dust extraction

Grinding Jones & Shipman 540-E Electronic Auto Cycling Surface Grinder with mag chuck, DRO, coolant & dust extractors

Grinding Universal Grinding STUDER RHU500. Internal spindle

Grinding Jones & Shipman 540 surface grinder
Ex school and hardly used. Immaculate! YOM circa 1990’s
Grinding Jones & Shipman 540P.
With 6in x 18in mag chuck, 2-Axis Heidenhain DRO & Optidress overhead wheel dresser
Grinding Studer RHU-400-DR Universal Cylindrical Grinder.
175mm C/H, 400mm G/L, AC drive to workhead
Grinding Surface Grinding HIDROPRECIS TP-70. Cap 1,200 x 650mm

Grinding MOORE No 2 JIG GRINDER
Ex MOD Machine in excellent condition with wide range of tooling. SERIAL NO: 2C7061 NEW late 1970’s Table Size 10 x 19” Table travels, longitudinal 16.1/2” cross ...
Grinding WALDRICH Surface Slideway Grinder. 3,000 x 1,000mm

Grinding TOS Cylindrical Grinder. Cap 4,000 x 630mm. Year 1984

Grinding STUDER S30 Universal Grinder 2004
Capacity 650mm
Grinding STANKO Cylindrical Grinder
Cap 4,000 x 600mm
Grinding Universal Grinding JONES & SHIPMAN Ultramat 1000. Year 1996. Cap 1,000mm

Grinding Surface Grinding LGB R1270. Year 2002. Cap 1,200 x 700mm

Grinding MYFORD MG12 HP 5 x 12 Cylindrical Grinder
New: 1970’s rebuilt 2018 Hydraulic Plunge and traverse Maximum grinding diameter: 3″ Swing over table: 5″ Maximum table travel: 13.5″ Capacity between centers: 12″ Table swivels: + – 7 degrees Grinding wheel size:...
Grinding MYFORD MG12 HPT 5 x 12 Cylindrical Grinder
New 1980’s Country of origin UK Rebuilt 2018 General Specifications Maximum grinding diameter 3″ Swing over table 5″ Maximum table travel 13-3/4 Min. Capacity between centers 12″ Table swivels either way 10 Deg. Table...
Grinding STUDER CNC Cylindrical Grinders
Year 2000 plus
Grinding MOORE Jig Grinders
All CNC and manual models
Grinding LANDIS CNC Cam Grinders

Grinding LANDIS CNC Crankshaft Grinders

Grinding VOUMARD & STUDER Internal Grinders

Grinding LIDKOPING, CINCINNATI, GHIRINGELLI, MIKROSA, ESTARTA and NOMOCO Centreless Grinders

Grinding FORTUNA - Set of Internal Spindles for Grinding Machine

Grinding FARREL 50" x 18' CNC Roll Grinder
Serial number 1948/2000 Weight of the machine (T) 68
Grinding DANOBAT 800 RP Universal Cylindrical Grinder
YOM 1979 Wheel dimensions Ø x bore x width (mm) 500 Ø over the bed (mm) 350 Distance between-centers (mm) 800 Workpiece holder speeds (Rpm) Var / 37-450 Part holder headstock swivels (°) +/- 45 Table swivels (°) +/- 10 Machine equipped with... With video
Grinding ELB OPTIMAL 2 VAII Surface Grinder

Grinding ANDMAR 1640 AHD Surface Grinder
Reference: RP016 Model 1640 AHD YOM 2008 Travels (mm) X = 1000 Y = 400 Z = 522 Magnetic chuck size (mm) 1,000 x 400 Wheel dimensions Ø x bore x width (mm) 355 x 50 x 127 Main motor power (hp) 6 Machine equipped with : Auto-downfeed / Rapid...
Grinding SMAL 440x2800 Cylindrical Grinder
Model 440x2800 Serial number v7420 Ø over the bed (mm) 440 Distance between-centers (mm) 2800 Weight of the machine (T) 11
Grinding