Deep Hole Boring TBT Cap 1,500 x 61mm

Boring - deep hole SIG Deep Hole Gun Drilling / Boring Machine
Model: B31 / 3.5 Max. Boring Dia.: 100mm (from solid) Min. Boring Dia.: 12mm (from solid) Max. Boring length: 3500mm Max. counter boring: 160mm Max. Trepanning: 120mm Spindle Speed Range: 150 – 675 RPM 360 – 1645 RPM Rapid...
Boring - deep hole Wohlenberg B10S
Make: wohlenberg Type: conventia Model: B10S Maximum Drilling Diameter (mm): 50 - 355 Maximum Drilling Length (mm): 4000 R.P.M.: 56 - 710 kW: 75 [Ref: wohlenberg-b10s-deep-hole-borer]
Boring - deep hole Beyer BTBH 28
Make: beyer Type: conventia Model: BTBH 28 Maximum Drilling Diameter (mm): 650 Maximum Drilling Length (mm): 6000 Maximum Load (Ton): 6.000 R.P.M.: 50 - 600 kW: 30 Volts: 380v Cycles: 50 [Ref: deep-hole-boring-machine-beyer-btbh-28-11-321e]
Boring - deep hole Takisawa TAL X 950
Make: takisawa Type: conventia Model: TAL X 950 Machine number: A6Y3204 Maximum Drilling Diameter (mm): 228 Maximum Drilling Length (mm): 4575 [Ref: takisawa-tal-x-950-11-775e]
Boring - deep hole Beyer BTBH-50 / 100
Make: beyer Type: conventia Model: BTBH 50/100 Maximum Drilling Diameter (mm): 70-550 Maximum Drilling Length (mm): 10000 Maximum Load (Ton): 10 R.P.M.: 35-92 + 92-595 kW: 37 Volts: 220v Cycles: 50 [Ref: deep-hole-boring-machine-beyer-btbh-...
Boring - deep hole Hegenscheidt NN
Year of Manufacture: 1980 Make: hegenscheidt Type: conventia Model: NN Maximum Drilling Diameter (mm): 380 Maximum Drilling Length (mm): 2000 Maximum Load (Ton): 2 R.P.M.: 125 - 1180 kW: 80 Volts: 380v Cycles: 50 [Ref:...
Boring - deep hole TBT E 320-1-1800
Make: tbt Model: E 320-1-1800 Machine number: 11.05434.014 Control: Fidia WS 32 Version V2R8.8 Maximum Drilling Diameter (mm): 40 Maximum Drilling Length (mm): 1800 Taper: iso-50-p-d-b Maximum Load (Ton): 20 Table size: 1800 x 2000 X-Travel...
Boring - deep hole VDF M1000 x 3500mm Deep Hole Borer
VDF M1000 x 3500mm Deep Hole Borer Year 1963 Modernized Electrics Centre Height 500mm Swing over bed 1,000mm Max length of bore in one pass in front of chuck 3500mm Hollow spindle 165mm Max length bored when using hollow spindle for dia...
Boring - deep hole Broadbent Deep Hole Borer x 10,000mm
Hollow spindle headstock 15” Headstock speeds 11.5 -350 rpm Headstock drive motor Centre height over bed 22” 32” dia 4 jaw chuck on headstock Overall length of bed 85` Max boring length in one pass approx. 32`(10,000mm) Boring saddle with...
Boring - deep hole RYAZAN Model RT 263218 10,000mm Deep Hole Borer
1993 300mm hollow spindle headstock Headstock speeds 80-500rpm 2 x 640mm 4-jaw chucks 3 x Boring bar dampers 2 x 3 Point closed steadies Front bed sections consist of 2 x 4,000mm & 1 x 5000 mm Rear bed sections consist of 2 x 5,000mm 8kw...
Boring - deep hole RYAZAN Model PT 604 x 4,000mm Deep Hole Borer
Year 1980 Centre height 425mm Headstock speeds 40-500rpm Headstock motor 30kW Headstock spindle bore 90mm Total bed length 10,400mm Max boring length in one pass 4,000mm 4 jaw lantern style chuck 710mm, 400mm bore Windmill steady with 400mm...
Boring - deep hole RYAZAN Model PT 60189 4,500mm Deep Hole Borer
Year 1981 Boring length 600-4,500mm Static bar machine (Counter rotation head available if required) Boring capacity in solid 30-100mm Counter boring up to 250mm Trepanning up to 250mm Centre height over the slide way - 315mm Spindle speeds...
Boring - deep hole RYAZAN PT263158 4,000mm Deep Hole Borer
1993 - Fully rewired with new operator control unit giving digital read out of chuck, oil and feed amps with pre-set limits for knock off (Broken tool protection). - Digital counter for boring depth with pre-set depth control facility. - Complete... With video
Boring - deep hole RYAZAN Model PT60104 2,500mm Deep Hole Borer
Year 1980 Centre Height 315mm Swing 630mm Max. boring length in one pass 2,500mm Solid boring capacity, nominally 30-100mm Max. counter boring capacity 250mm Spindle Speeds 40-500rpm Spindle bore 90mm Counter rotation head Counter rotation...
Boring - deep hole GILDEMEISTER & KNOLL B4N 7,500mm Deep Hole Borer
(Heidenreich & Harbeck) Serial number 1748-0004/5 Swing over bed 815mm Spindle speeds 56-1120rpm Bore of spindle 113mm Max. torque of spindle 600m/kp Feed range in two ratios 8-2,500mm/min Headstock motor 75kW Bed width 530mm Bed lengths 3...
Boring - deep hole