Wenzel
Make: wenzel Type: measuring-table Table dimensions (mm): 2700 x 1200 x 1200 mm [Ref: wenzel-12-740v]
Misc Schiess NN
Make: arno Type: rotary-table Model: NN Table (mm): Ø 1800 Max. Load: 15 Ton Cross travel (mm): 1000 [Ref: rotary-table-schiess-nn]
Misc San Rocco NN
Make: asquith Type: rotary-table Model: NN Table (mm): 1.830 x 1.830 mm Max. Load: 20 ton Cross travel (mm): 1000 [Ref: rotary-table-san-rocco-nn-11-052t]
Misc Schiess Froriep K16
Make: ayce Type: rotary-table Model: K 16 Table (mm): 1.500 x 2.500 Max. Load: 10 - 15 ton [Ref: nc-rotary-table-schiess-froriep-k16-11-136t]
Misc Stanko NN
Make: cazeneuve Type: rotary-table Model: NN Table (mm): 2.000 x 2.500 Max. Load: 20 / 25 Ton Cross travel (mm): 1250 kW: 6,5 [Ref: rotary-table-stanko-nn]
Misc Scharmann NN
Make: clovis Type: rotary-table Model: NN Table (mm): 2.000 x 2.000 Max. Load: 25 Ton Cross travel (mm): 1500 [Ref: rotary-table-scharmann-nn]
Misc Netstahl N1570 - 300SY
Make: netstahl Type: injection-moulding-machine Model: N1570 / 300SY Machine number: 8356226 Capacity: 300 ton Line pressure: Bar 140 Kn Injection force: nK 620 Clamping force: Kn 3000 Opening stroke: 250 - 590 mm Module space: 250 - 600...
Misc Ungerer NN ( 11.109VH)
Make: ecoca Type: leveller Model: NN Capacity: 1750 x 2 mm kW: 70 Volts: 400v Cycles: 50 [Ref: leveller-ungerer-nn-11-109vh]
Misc Steady rests
Make: clovis Type: steady-rests Model: NN Max diameter (mm): 2400 Centre height (mm): 2050 Base width (mm): 1500 / 2000 [Ref: steady-rests-11-224v]
Misc Norte VS 2000
Make: dsg Type: cnc-profiling-machine Model: VS 2000 [Ref: cnc-profiling-machine-norte-vs-2000-10-822v]
Misc Eimeldingen NN
Make: eimeldingen Type: rotary-table Model: V12-1500 Machine number: 612.006 Table (mm): 1500 Max. Load: 10 Ton Cross travel (mm): 1500 Volts: 380v Cycles: 50 [Ref: eimeldingen-nn-12-066tm]
Misc Colgar TRT 150
Make: colgar Type: rotary-table Model: TRT 150 Machine number: 9508/86/F049 Table (mm): 2000 x 2500 Max. Load: 30 Ton Cross travel (mm): 2000 Cycles: 50 [Ref: colgar-trt-150-12-192tt]
Misc VEB Union Gera N.N.
Make: union Type: rotary-table Model: N.N. Machine number: 131959 Table (mm): 1800 x 2100 Max. Load: 8 Ton Cross travel (mm): 1200 Volts: 380v Cycles: 50 [Ref: veb-union-gera-n-n-12-431t]
Misc Bench 1400 x 820 x 800, Small Vice, 4 Drawers and Contents E16
Compressor E16, 3 Phase, 3 Horsepower, 150 PSIG, 150 Litre, SWP 150PSI [Ref: 106306]
Misc Comp Air Churchill 3-200 Chiller Unit BCS2
CompAir Churchill 3-200 Chiller [Ref: 106330]
Misc LTE Swallow Oven 53
LTE Swallow Oven, 11 shelves, Internal Dimensions: 550mm w x 470mm x 1100mm h, sn 63014/05, 230/240 v single phase, 2600w 13 amp [Ref: 106324]
Misc LTE Swallow Oven 54
LTE Swallow Oven, 11 shelves, Internal Dimensions: 550mm w x 470mm x 1100mm h, sn 63014/01, 230/240 v single phase, 2600w 13 amp [Ref: 106325]
Misc LTE Swallow Oven 55
LTE Swallow Oven, 11 shelves, Internal Dimensions: 550mm w x 470mm x 1100mm h, sn 63014/05, 230/240 v single phase, 2600w 13 amp [Ref: 106326]
Misc LTE Swallow Oven 56
LTE Swallow Oven, 11 shelves, Internal Dimensions: 550mm w x 470mm x 1100mm h, sn 63014/05, 230/240 v single phase, 2600w 13 amp [Ref: 106327]
Misc Regloplas 90 Smart Chiller Unit BCS4
Regloplas 90 Smart Chiller [Ref: 106331]
Misc Tool Temp Chiller Unit BCS7
Tool Temp Chiller Unit [Ref: 106329]
Misc Virginio Nastri Powered Conveyor B5
Virginio Nastri Powered Conveyor, Type PNL 2AA, Year 2001 [Ref: 106321]
Misc Virginio Nastri Powered Conveyor L7
Virginio Nastri Powered Conveyor, Model PNL 2AA, Year 2001 [Ref: 106322]
Misc Virginio Nastri Powered Conveyor A4
Virginio Nastri Powered Conveyor, Model PNL 2AA, Year 2001 [Ref: 106323]
Misc Virginio Nastri Powered Conveyor D1
Virginio Nastri Powered Conveyor, Model PNL 211, Year 2001 [Ref: 106320]
Misc Comac L32 Floor Scrubber and Charger L32
Comac L32 Floor Scrubber and Charger [Ref: 106157]
Misc Colortronic M180/120 Granulator bcs_11
Colortronic M180/120 Granulator [Ref: 106338]
Misc Colortronic powered Granulator bcs_13
Colortronic powered Granulator [Ref: 106340]
Misc Gildmeier Table sts1
Gildmeier Table, Type LT 1120/2720 WA, Serial No 1783, Year 2012, Roller assist top (pnumatic), weighing scale built in. [Ref: 106342]
Misc KT Handling 02 Granulator bcs_12
KT Handling 02 Granulator [Ref: 106339]
Misc Robot arm bcs_4
Robot arm - We have approx 4 units all used in the manufature of parts with plastic injection mulding machine. [Ref: 106337]
Misc Clarke Plasma King 70 Torch and Leads and regulator King 70
Clarke Plasma King 70 Torch and Leads and regulator [Ref: 100]
Misc Cleervue Interlocking Safety Guards
Cleervue Interlocking safety guards for Bridgeport Style Milling Machine£200 each [Ref: 103]
Misc Robot arm bcs_4
Robot arm [Ref: 106344]
Misc Tool Temp Chiller TT-162E BCS6
Tool Temp Chiller TT-162E [Ref: 106335]
Misc Tool-Temp TT188 Chiller Unit BCS8
Tool-Temp TT188 Chiller  [Ref: 106336]
Misc Electromagnetic Chuck Type GA36x8 GA36
Electromagnetic Chuck 36" x 8" x (h) 3.5", 220V, 190W, Type GA36x8, Serial No 13125, To Suit Surface Grinding Machine, Made In England [Ref: 127]
Misc Hofmann Uni Div Head 160mm 3 jaw
Hofmann Uni Div Head 160mm 3 jaw [Ref: 152]
Misc Nederman Fume Fan Extractor Mobilr
Used Nederman Fume Extractor for welding fumes with grinding fumes / dust particle filter box, mobile on wheels. [Ref: 188]
Misc Quasi Arc Welding Oven, Type D/1 D/1
Quasi Arc Welding Oven, Type D/1 [Ref: 203]
Misc Swage Tools
Swaging Tools  [Ref: 223]
Misc Tunnel Demagnetiser DE 90
Thru Feed Tunnel Demagnetiser 3 Phase, 415Volts [Ref: 106219]
Misc Yellow Bellied Sump Sucker YBSS
Yellow Bellied Sump Sucker, 3 Phase,  [Ref: 106213]
Misc Zoller V42002 Tool Presetter V42002
Zoller V42002 Tool Presetter, serial number 00274, Year 2002. [Ref: 260]
Misc Humphreys Demag Unit Tunnel Demagnetizer DM43A
Humphreys Demag Unit Tunnel Demagnetizer, Type DM43 A, 230V [Ref: 116]
Misc Jones & Shipman Wheel Balancer Type 2101-004 2101-004
Jones + Shipman Wheel Balancer Type 2101-004, Heavy Duty, Complete With Cover [Ref: 106215]
Misc ARGOFIL 400 FLV FOB Ducci Welder 400FLV
ARGOFIL 400 FLV FOB Ducci Welder & Wire Feed. Loaded from site Sheffield Our Ref 104502 [Ref: 70]
Misc Align Power Feed Unit for X Axis X Axis
Align Power Feed Unit for X Axis NEW [Ref: 64]
Misc Align Power Feed Unit for Y Axis Y Axis
Align Power Feed Unit for Y Axis NEW [Ref: 65]
Misc Align Power Feed Z Axis Z Axis
Align Power Feed Z Axis NEW [Ref: 66]
Misc Permanent Magnetic Chuck ~ (New) 150 x 450mm GL618
New - Permanent Magnetic Chuck For Surface Grinding Machine   In Stock - GL-618, Size 150 x 450mmWeight 32kgsMade In Taiwan [Ref: 106196]
Misc Permanent Magnetic Chuck ~ (New) 300 x 600mm GL1224
New - Permanent Magnetic Chuck For Surface Grinding Machine   In Stock - GL-1224, 300 x 600mmWeight 94kgsMade In Taiwan [Ref: 106197]
Misc SIP Rotary Table Societe Genevoise P1-5 L50
SIP Rotary Table Societe Genevoise P1-5 [Ref: 106375]
Misc SIP Rotary Table Societe Genevoise P1-5 L51
SIP Rotary Table Societe Genevoise P1-5 [Ref: 106376]
Misc SIP Rotary Table Societe Genevoise P1-5 L55
SIP Rotary Table Societe Genevoise P1-5 [Ref: 106380]
Misc SIP Societe Genevoise PD-6 L52
SIP Societe Genevoise PD-6, 800mm Diameter No. 354 [Ref: 106377]
Misc SIP Societe Genevoise PD6A L53
SIP Rotary Table Societe Genevoise PD6A5, 800mm Diameter Rotary Table, No 60. [Ref: 106378]
Misc SIP Societe Genevoise PD6A L54
SIP Societe Genevoise PD6A, 800mm Diameter Rotary Table,  [Ref: 106379]
Misc Engineering draw cabinet (3771)
Engineering draw cabinet, Various draw combinations of approximately 7 draws, size 710 x 710 x 1500mm tall
Misc Vixen Fox 25 Shot Sand Bead Grit Blasting Blaster Cabinet
Vixen Fox 25 suction fed blast cabinet. Rear mounted dust extractor. Extractor & lights are 240v. In full working order. Operated by a foot pedal. Just been refurbished and fitted with many new parts, this includes viewing window, filter bags in the...
Shotblasting 2000 Ton Shipyard Rolls. 14,400mm x 50mm capacity
Manufacturer: WILHELMSBURGER Model: Serial No.: 2973 Year of Manufacture: 1971 - installed 1972 Max plate thickness full length: 50mm Max plate length: 14,400mm Top Roll Diameter: 540mm Bottom Rolls Diameter: 460mm Max Working Pressure:...
Misc 700 Ton Ship Building Press
Manufacturer: SMT PULLMAX URSVIKEN Model: VPF 700/800 - 4.4 Serial No.: M2925 Press Power: 70 - 700 tons Stroke length: 800mm Lateral displacement maximum: 3050mm Approach speed: 90mm/second Press speed: 7.7mm/second Return speed:...
Misc Modul Gear Hobber. Max dia of workpiece 2100mm.
Manufacturer: WMW Model: ZFWZ 2000x20/II Serial No.: 6732 Table diameter: 1800mm Maximium diameter of workpiece: 2100mm Digital readout: 3 Axis Equipment: Work arbors 2 x 60 OD, 2 x 40 OD, 32 OD, 80 OD Features: Maximium D pitch 20 Nett...
Misc Shrinking & Metal Forming Machine.
Manufacturer: ECKOLD Model: Piccolo KF310 Serial No.: 10574057 Steel: 2mm Aluminium: 2.5mm Inox: 1.5mm Throat: 340mm Daylight: 192mm Stroke Lenght: 25mm Working Strokes: 400 per/min Input: 415/3/50hz 1.5 kW Features: Mounted on...
Misc Oil Mists 9 Cartridge Filtration System, Manufacture 2019
Manufacturer: LOSMA Model: Argos Pro 15000 Serial No.: 00001 Year of Manufacture: 2019 Suitable for: Oil Mists Max, Air Flow : 15000 m3/h Number fs Cartridges : 9 Filtration Surface m2: 108 Noise Level: 80 dBA Input: 415/3/50hz ...
Misc 2000mm x 4000mmm Linisher. Ex Aerospace machine. Suitable for Deburring of Machined Aircraft Parts. With Infeed / Outfeed Tables & Dust Extraction. Manufactured 2000
Manufacturer: FLADDER Model: 400 Gyro - Aero Serial No.: 1024 Year of Manufacture: 2000 Control: Schneider Magelis PLC Max, item height: 150mm Max, item width: 2000mm Max, item length: 4000mm Tables: 2000mm x 4000mm Infeed Table, 2000mm x...
Misc Hydraulic Corner Notcher. 250mm x 250mm x 3mm
Manufacturer: SAFAN Model: Serial No.: CN / 12.01 Capacity: 250mm x 250mm x 3mm Table size: 700mm x 900mm Input: 400/3/50hz Actuated via: wander type footswitch Length: 900mm Width: 700mm Height: 1400mm Nett weight actual.: 650...
Misc 1500mm Twin Deck Sieve. Manufactured 2015
Manufacturer: CUCCOLINI Model: VTU15002X Serial No.: LL07154132 Year of Manufacture: 2015 Tumble Size: 1500mm Decks: 2 Outlets: 3 Input: 400 /3/50hz Length: 1850mm Width: 1850mm Height: 1400mm Nett weight actual.: 1,060 Kgs. [Ref:...
Misc 400 ton Ships Frame Bender
Manufacturer: HUGH SMITH Model: Serial No.: 27125 forward & reverse bending force: 400 tf Max. bending force arm clamp force: 80 tf Max. centre clamp force: 80tf Bending arm centres: 1540mm Max. forward: 165mm Max. reverse: 270mm Blub...
Misc 2500mm Universal Gear Hobber, with Internal Attachment
Manufacturer: WMW Model: ZFWZ 2000/30 Year of Manufacture: 1975 Max. work diameter: 2500mm Gear width: 850mm Table size: 1800mm Max. D.P.: 30 Diameter of hole in the table: 700mm Hob vertical traverse: 850mm Arbor diameters: 3 x 60mm, 2 x...
Misc If you have machinery you no longer use, please send details of the machine(s), along with any photos for our consideration to sales@electromotion.co.uk
Manufacturer: Model: [Ref: 32181]
Misc New LNS MH500 Swarf Conveyor & Bin (1100HD)-1
[div][div][span]Serial Number[/span][div]NA[/div][/div][/div][div][div][span]Warranty[/span][div]12 Months Parts & Labour Warranty[/div][/div][/div][div][div][span]Training[/span][div]NA[/div][/div][/div][div][div class="pt-cv-custom-fields...
Misc Used 2021 SMX 2000
• ProtoTRAK SMX 3 Axis CNC Control[br /] • 3 Axis Digital Readout[br /] • R8 - 3HP Spindle[br /] • 75 - 4,200 RPM Vari Speed Head[br /] • 762mm X 380mm X 400mm (X/Y/Z Axis Travel)[br /] • Interlocked Guarding[br /] • Fibreglass Swarf...
Misc Baublys IF 20 IP Laser marking
This Baublys IF 20 IP Laser marking machine was manufacture in 2017. It work with a laser source power class of 20 Watt and with a focus distance of 180 mm from protective glass. This machine has a 15" Color LCD monitor, high resolution, low...
Misc Q-FIN F600 Deburring Machine
This Q-FIN F600 Deburring Machine was built in the year 2020. This machine has a working width of 600 mm. It include return conveyor. [Ref: NL-DEB-Q-F-2020-00001]
Misc -DRILL TCC-50+RL4000+RCT2000 Tube Sawing Cutting Machine
This T-DRILL TCC-50+RL4000+RCT2000 Tube Sawing Cutting Machine was manufactured in 1999 in Finland. This machine is operated through a control unit of the same brand. It include a run out table. [Ref: LT-SAW-T-D-1999-00001]
Misc Stratasys Fortus 380MC 3D printer
This Stratasys Fortus 380MC 3D printer was manufactured in 2016. This machine has been working for 13500 hours. It has a maximum print range 305 x 355 x 305 mm, and a print speed 200 mm/s. It is in very good conditions, it has been regularly...
Misc Stratasys Objet 1000 Plus 3D printer
This Stratasys Objet 1000 Plus 3D printer was manufactured in 2016. This Multi material printing machine has been working for 3500 hours. It has a working range 1000 x 800 x 500 mm, and can work with a max. model weight 200 kg. It Include washer for...
Misc Orbitalum ORBIMAT 300 CA AVC/OSC
This Orbitalum ORBIMAT 300 CA AVC/OSC Cutting Welding Machine was manufactured in 2012 in Germany. It has a record of only 99 working hours. This machine is equipped with an Orbimatic control unit. It works through a portable control panel with 6 m...
Misc REINIGUNGS / WASCHANLAGE RUT 067-048-030-04
This REINIGUNGS / WASCHANLAGE RUT 067-048-030-04 was built in the year 2015. It is an automatic cleaning system which is used for cleaning and degreasing metal parts using aqueous media for the products produced by the other machines. [Ref:...
Misc Dynamical DTLITE 3D Printer
This Dynamical DTLITE 3D Printer was manufactured in the year 2019. It has been working less than 500 hours. This machine can works with a 600 x 450 x 450 mm print sizes, a double-head and with different materials. It includes an extra tempered...
Misc LOIRE SAFE Edim 800 Stamping Machine
This LOIRE SAFE Edim 800 Stamping Machine was manufactured in Spain in 1996. It can work with a stamping force of 8000 kN, stroke of 1600 mm, and comes with a table of 2500 x 1700 mm. [Ref: ES-STA-LOI-1996-00001]
Misc EMAG VTC 250 Vertical Lathe
This EMAG VTC 250 Vertical Lathe machine was built in the year 2010. It is equipped with a Siemens Sinumerik control unit. This machine can perform with a spindle speed up to 5000 rpm. Presents good condition. [Ref: ES-TUR-EMA-2010-00001]
Misc SLM 280 HL 3D Printing
This SLM 280 HL 3D Printing It was manufactured in the year 2016. The SLM 280 HL series laser melting machine is a universal base machine for additive manufacturing. In principle, the machine can process almost all types of meltable metal. [Ref:...
Misc ERNST NEPTUN EB Deburring Machine
This ERNST NEPTUN EB Deburring Machine was manufactured in the year 2013 in Germany. It has 5139 working hour. It is equipped with an Ernst Pro Face control unit. It include: deburring module, brushing module, and a belt filter. [Ref:...
Misc Timesavers series 100 143-20B
This Timesavers series 100 143-20B Deburring machines was manufactured in the Netherlands in 2001. [Ref: NL-DEB-TIM-2001-00001]
Misc Doosan DBC250II Boring Machine
This Doosan DBC250II Boring Machine was built in Korea in the year 2014. It has been on for 19079 hours of which 7483 are cutting hours. This machine is equipped with a FANUC-31i control unit. It has a spindle speed up to 6000 rpm and a table of...
Misc Stratasys Fortus 380mc
This Stratasys Fortus 380mc 3D printer was made in the United States in 2018. It has an envelope size 355.6 x 304.8 x 304.8 mm. This machine works through a touchscreen graphical user interface in its computer workstation. It includes two material...
Misc Extrude Hone Classic 1A-450-43-P-M Deburring Machine
This Extrude Hone Classic 1A-450-43-P-M Deburring Machine was built in the year 2017. It is equipped with a Siemens Simatic Panel touch control unit. This machine work with a freshwater mains pressure of ] 4.5 bar, and a compressed air connection...
Misc Costa MD5 CVV 1350 Deburring Machine
This Costa MD5 CVV 1350 Deburring Machine was built in the year 2015. It is equipped with a Costa Magelis control unit. This machine has a wet suction: 190 cm long, 130 cm wide, and 250 cm high. It includes a Vacuum belt, a wet suction, and extra...
Misc CANNON PRE PREG OVEN machine
This CANNON PRE PREG OVEN machine was made in the year 2012. It works with power of 3x400v 50Hz. [Ref: FR-OTH-CAN-2012-00001]
Misc ERNST PLUTO ELL 600
This ERNST PLUTO ELL 600 Deburring Machine was manufactured in the year 2014 in Germany. This machine has a record of 8400 working hours. It presents a table dimension of 1540 x 600 mm and supports 300 kg of workpieces. [Ref: EE-DEB-ERN-2014-00001]
Misc Pinette 2000 Ton Compressor Moulding machine
This Pinette 2000 Ton Compressor Moulding machine was manufactured in the year 2012. It has been on for 32263 hours approximately. It works with a closing force of 20000 kN, work pressure 267 bar and an opening fast 30 m/min. [Ref:...
Misc Pinette 2000 Ton Compression Moulding Machine
This Pinette 2000 Ton Compression Moulding Machine was built in the year 2011. It shows 922283 cycles. The machine is capable of operating with a closing force 20000 kN, fast closing 30 m/min, and an ejection 200 bar. [Ref: GB-INJ-PIN-2011-00001]
Misc Pinette 1500 Ton Compressor Moulding machine
This Pinette 1500 Ton Compressor Moulding machine was made in the year 2002. It has 70561 production hours approximately. It operates with a closing force of 15000 kN, work pressure 266 bar and an opening fast 30 m/min [Ref: ES-INJ-PIN-2002-00001]
Misc RENISHAW AM 250
This RENISHAW AM 250 3D printer was built in 2013 in United Kingdom. This machine has very low usage hours and comes with a Russel Sieve Machine, a RUWAC Wet Separator (Vacuum) and a Nabertherm Furnace. It is designed for the production of medium...
Misc ROBBI LYOR 30/40 Boring machine
This ROBBI LYOR 30/40 Boring machine was manufactured in Italy in 2007. This machine operates with a rotation speed range of 10-150 rpm and a bore diameter of 50 - 250 mm. This is a horizontal tube honing machine. [Ref: IT-BOR-ROB-2007-00001]
Misc SNK BFR-3500 Horizontal floor type boring machine
This SNK BFR-3500 Horizontal floor type boring machine was made in the year 2014. It is equipped with a FANUC 31iMA control unit. It can works with a spindle speed up to 6000 rpm. Includes manual books. [Ref: KR-BOR-SNK-2014-00001]
Misc Pinette 2500 Ton Compression Moulding Machine
This Pinette 2500 Ton Compression Moulding Machine was built in the year 2014 in Finland. It shows 19500 working hours. The machine is capable of operating with a closing force 25000 kN, fast closing 30 m/min, and an ejection 200 bar. [Ref:...
Misc SEI Laser INFINITY 5070 Laser Engraving, Marking and Cutting Machine
This SEI Laser INFINITY 5070 Laser Engraving, Marking and Cutting Machine was made in Italy in the year 2008. It has only been in operation for 7661 hours, of which 6664 are production hours. It is operated using an Icaro SW software for PC Windows,...
Misc IKEGAI ANC 130FM
This IKEGAI ANC 130FM Floor Boring Machine tool was rebuilt and retrofit in 2017 in Japan by IKEGAI HQ employees. It is equipped with a FANUC Series 18i-MB control unit. This machine has a spindle speed up to 1200 rpm and a spindle stroke 750 mm. It...
Misc Schussler SL MLWE 5F Laser Welding machine
This Schussler SL MLWE 5F Laser Welding machine was manufactured in the year 2020. Operated through an Industrial touch monitor. This 5 axis works with a QCW laser (IPG) 150 kW. Machine is new, has 0 production hours. [Ref: DE-WEL-SCH-2020-00001]
Misc VIXEN Jetair Dry Shotblast Cabinet
With XL pressure pot and cyclone model VM55 special oversize cabinet
Shotblasting VIXEN TRISTAR 300
VIXEN TRISTAR 300 Washer dryer
Component Cleaning Guyson (Kerry Pulsatron) UCR1500 Special
Ultrasonic cleaning machine. Guysons Special UCR1500 with pumping and filtration unit. Includes 3 baskets. Immaculate condition.
Misc Flow 5 Axis Waterjet
150,000 Euro Please talk to us if you are interested in this machine, we can install and help with setup and process development, discount may be possible Abrasive waterjet systems excel at three-dimensional cutting, and Flow manufactures a...
Automatics - NC/CNC Various used storage & tooling
Please call us on 0191 410 5886 with your specifications.
Misc Used Record Engineer & Machine Vices
Please call us on 0191 410 5886 with your specifications.
Misc Used Blacksmiths Tooling
Please call us on 0191 410 5886 with your specifications.
Misc RJH Buffalo DE Buffing / Polishing Machine - L91008.08
Ref: L91008.08 PRICE (EX VAT) £1,275 RJH BUFFALO DOUBLE ENDED BUFF SAFETY KICK STOP, EYE SHIELDS POWER 1 HP Three Phase Electric's
Polishing MORGAN RUSHWORTH PRS 50/155 Section Roller
50mm shafts
Roll Forming Elliott 14MR 14" Shaper L10311.02
PRICE: £3,600 + VAT Manufacturer Elliott Model 14MR 14" Shaping Machine Max Stroke 355 mm (14”) Strokes per min 12-110 6 Speeds Largest shaft admitted under ram 50mm (2”) TABLE 355 x 254mm (14 x 10”) Top Surface 283 x...
Shaping Fly Press - L20001.01

Engineers' small tools Dominion 16” Planer Thicknesser - L00907.03
our ref: L00907.03 PRICE (EX VAT) £4,750 DOMINION PLANER THICKNESSER CAPACITY 16” Width (400mm) x 9” (230mm) Thicknessing Depth 1800mm overall length of surfacer table (top tables) 700mm Length of thicknessing table FEATURES 4...
Planing Boxford 330TR Straight Bed Centre Lathe (Metric) - L20222.03
£5,250.00 + VAT Capacity 750mm (30”) Between centres 330mm (13”) swing over bed 230mm (9”) swing over cross slide Spindle bore 35mm (1 3/8”) Chuck fitting D1 3 Camlock Tail stock 3MT Equipment 160mm 3 Jaw Chuck Quick Change...
Lathes - flatbed Boxford 280T Straight Bed Centre Lathe (Metric) - L20222.01
£4,750.00 + VAT Manufacturer Boxford Between centres 500mm (20”) Swing over bed 280mm (11”) swing over cross slide 178mm (7”) Spindle Bore 35mm (1 3/8”) Chuck fitting D1 3 Camlock Tail stock 3MT Equipment 5” 3...
Lathes - flatbed ATK Greenbank GB150 Vertical Compactor Baler - L10413.01
Improve your waste efficiency with this compact baling machine ideal for general recycling streams such as cardboard and polythene Make & Model: ATK Greenbank GB150 Vertical Compactor Baler Ideal for cardboard & polythene Motor 2.2 kW 3HP...
Misc IRD Wheel Balancer

Balancing Machines MORGAN RUSHWORTH PSR 50/155 SECTION ROLLER
Shaft diameter 50mm, rolls diameter 155mm, horizontal/vertical working positions, forward/reverse footpedal, 2 driven shafts, set standard rolls, lateral guide rolls, motor 1.5kw, weight 400kg
Ring Rollers Canning Twin Spindle Polisher Type 1671
Canning Twin Spindle Polisher Type 1671 Spindle Power 20hp 3 Phase Revs Per Minute 2900 Serial Number DA60338 Model 1671
Polishing Clarke Heavy Duty Petrol Power Washers

Misc Clarke Garages/Workshops

Misc Clarke Ventilators

Misc Clarke Bench Buffers/Polishers

Polishing Clarke Pro Tool Chests & Cabinets

Misc Clarke Submersible Water Pumps

Pumps and Pumping Plant Compair Broomwade Cyclon 345 Compressor (3680)
Compair Broomwade Cyclon 345 Compressor, 2000, s/n F168/0629, 238cfm, 8.2 bar, 50.7kw
Misc GIDDINGS & LEWIS MC Endomatic Facing & Centering Machine
8in dia x 132in capacity. Ref 27853
Facing and centring BATY R400 Profile Projector

Instruments - Parts, Scientific and Testing Surtech marpol 403 disk grinder
Swivel circular-disc sanders Power supply: 415 Volts Disc dimensions: 500 mm 1400 RPM L x B X H 700mm x 700 x 1000m Weight: 100 Kg
Belt Grinding, finishing DOOSAN B15T-5 Electric Forklift Truck. Year 2014. Ref 29031

Forklift Trucks Swarf Conveyor (3666)
Swarf Conveyor, UNUSED, Overall dimensions 3,300mm x 440mm x 1,520mm high, Drop to floor 1,000mm, Tray opening 1,840mm long x 440mm wide.
Swarf Conveyors and Bins ASTRA YS130 BENCH TAPPING MACHINE
Speeds 260/440/660 rpm, motor 0.5hp
Drilling - tapping COLCHESTER BANTAM 2000 GAP BED CENTRE LATHE
between centres 750mm, centre height 165mm swing over bed 330mm, spindle bore 35mm, speeds 40-2000rpm, 3 jaw chuck, QCTP & holders, bedstop, coolant, chuck guard, drill chuck, rear toolpost, change gears
Lathes - flatbed Easy Shrink 20 C8 Tool Adaptor (3674)
Easy Shrink 20 C8 Tool Adaptor
Misc NEW BENDMOR Ring/Section Rollers
A range of heavy duty profile/section rollers, for quick and easy rolling of sections, tubes, pipes and solid bars. Great value for money machines, supplied with universal rolls for rolling bar and sections, with low cost tooling sets also available...
Ring Rollers USED ERCOLINA TB60 Rotary draw tube bender
Rotary draw tube bender 60mm dia tube capacity 3 phase. Selection of tooling available With video
Pipe Bending NEW Feal-Seam Bar Benders and Shears
A full range of bar bending and shearing machines for a variety of applications in construction, fencing and general fabrication. Construction: Bending and shearing of reinforcing bar [re-bar]. Fencing: Bending and shearing of round bar for bow top... With video
Bar & Tube BIESSE Rover J FT1224 CNC Router. First installed 2019. X=2,463, Y=1,250, Z=200mm, 22.5m/min axis speed, spindle speeds to 24,000rpm, Biesseworks software (20949) POA

Routing AXYZ 6010 7G CNC Router
New 2019. V Carve Pro software, 7G tool changer, vacuum clamping, tool length sensor, 3,000 x 2,000mm capacity (20998) POA
Routing BIESSE JFT 1531 CNC Router
New 2019. Working area: X=3,100, Y=1,560, Z=200mm, Biesse SolidWorks control, 10 ATC, 24,000rpm spindle, light guards (21008) POA
Routing CLARK C500-2-12 MOTORISED DE-COILER
Max coil weight 500kg, straightener
Coil Processing Plant 5C Collet Fixture, Type 225-202C (3585)
5C Collet Fixture, Type 225-202C, Clamp horizontal or Vertical. With collets
Misc TAPPING ROSCAMAT
* M2-M36 * Free up expensive machining centre capacity * Produces quality tapped holes * Pneumatic and electric models * 6-speeds on one machine Arrange a free demo on your shop floor today
Screwing - tapping/threading ROSLER WET BLAST CABINET
MANUAL OR AUTOMATIC CYCLE, MOVING TABLE ,1200X1800MM,6 JET BLAST HEAD SIEMENS SIMATIC OP17 CONTROL ,YEAR 2006,
Misc WALTHER TROWAL MODEL CD200 200LTR VIBRATORY FINISHING BOWL
1997, WITH COOLANT SYSTEM AND CONTROL PANEL
Misc Rotary Tables, Dividing Heads & Vices Available. POA

Misc Large selection of HUNTON tooling. POA

Misc SCHENCK MODEL VE3 VERTICAL BALANCING MACHINE
YEAR 2010,WORKPIECE WEIGHT 100KGS,WORKPIECE DIAMETER 810MM SCHENCK CAB700 CONTROL
Balancing Machines REPCO Valve Seating Machine. Floating air head. Full equipment

Misc JONES & SHIPMAN 1400 LAR Surface Grinder
24in x 8in capacity, 24in x 8in close pole magnetic chuck, extended column, auto return to saddle, incremental down feed, digital opti dress, Mitutoyo KA 2-axis digital read-out.
Misc Clarke High Velocity Drum Fans

Misc Clarke Petrol Engine Water Pumps

Pumps and Pumping Plant Clarke Industrial Steel Boltless Shelving

Storage/Stillages GIDDINGS & LEWIS MC Endomatic Facing & Centering Machine 8? dia x 132? Capacity
Max Diameter Milling with 10? Cutters 8?.Max Diameter Milling with 8? Cutters 6.25?. Max Diameter Milling with 6? Cutters 3.5?.Minimum Diameter Clamping 1/2?. Maximum Workpiece Length (10? Cutters) 138?. Min Workpiece Length (6? Cutters) 4.5?....
Facing and centring T-Slotted Cast Iron Bedplates 3,000mm x 1,200mm x 180mm thick. 36 available. 28900

Misc T-Slotted Cast Iron Bedplates 5,000mm x 3,000mm x 400mm thick. 2 available. 28899

Misc SUSTAINABLE - RECYCLABLE - REDUCE WASTE - REINVEST
WE BUY - WE REFURBISH - WE SELL Pre-Owned Machine Tools and Fabrication Machinery
Misc BOX TABLE
Size 1,220 x 760 x 440mm (L x W x H). Good condition
Misc Angle Plate
Size 610 x 460 x 920mm (H x W x L). POA
Misc BOX TABLE of Radial Drill.
Size 1,600 x 920 500mm (L x W x H). Very good condition. POA
Misc CNC Pipe Bender. Cap 40mm, Siemens

Pipe Bending MAHR Formtester MFK 4 Shape Form Measuring Machine
New in 1986 Control-Type CNC Current Location D - 77815 Bühl-Weitenung Origin Germany Delivery Terms Sofort Quotation ex works, loaded on truck Technical Details Roundness measuring device : bearing 1 roundness meas. dev: support surface...
Misc AGIE AGIECUT Evolution BC 2 Wire Eroding Machine
Make AGIE Type AGIECUT EVOLUTION BC 2 New in 1997 Control-Type other Current Location D - 77815 Bühl Origin Switzerland Delivery Terms immediately Quotation ex works, loaded on truck
EDM - Wire Erosion EDWARDS 24in x 18 Gauge Box and Pan Folder
with set of fingers.
Misc ORT RP30 Hydraulic Thread Rolling Machine (1997)
Max pressure 300kN (30 tonne), max workpiece dia. 100mm, max die width 200mm, spindle dia. 69.85mm, spindle speeds 30-90rpm, main motor 15kW. Excellent condition.
Screwing - tapping/threading STARRETT VF600 Profile Projector. Year 2006. POA

Instruments - Parts, Scientific and Testing MOORE No. 2 Jig Grinder

Private Treaty For All Your Mazak Needs
Future planning a disposal or part exchange? Let us put your machine free of charge on our website to gauge its value in the marketplace usedmazakcnc.com is a comprehensive, one-stop service for any company buying, selling or using Mazak...
Misc COMPAIR Cyclon 105 30cfm Screw Compressor.
With receiver 4,800hrs. £1,850
Misc FLUIDAIR FRXR 5.5 Tank Mounted Screw Compressor.
1,725hrs. £1,450
Misc RIDGID 300 Pipe Threading Machine
Complete with 2in head and 4in head, 110 volt. Choice of 2. £775
Misc ROSCHLER & EICHLER 220mm capacity
3 speeds, 45-125spm. £1,850
Misc RIDGID 535 Pipe Threading Machine. ½in to 2in capacity. £975

Screwing - tapping/threading Emi-Mec Microsprint 50 CNC Controlled Automatic Turret Lathe Fully Overhauled
Emi-Mec Microsprint 50 CNC Controlled Automatic Turret Lathe Bar Capacity 2” (50mm) Collet Chuck (takes crawford multibore V120 collets) Bar Feed Electric Motor Driven (takes 10ft single bars) Six Tation Turret (ballscrew driven 200mm...
Automatics Emi-Mec Microsprint 26 CNC Controlled Automatic Turret Lathe Fully Overhauled
Emi-Mec Microsprint 26 CNC Controlled Automatic Turret Lathe Bar Capacity 32mm Collet Chuck (takes crawford multibore T980 collets) Bar Feed Air Driven (takes 10ft single bars) Six Tation Turret (ballscrew driven 200mm stroke) One vertical...
Automatics Agemaspark Eurospark 740 with Pulse generator 50A
Agemaspark Eurospark 740 with Pulse generator 50A Tank 670mm – 400mm, 3 R Tooling, Eurospark 50 amp Generator Complete With: 2 Axis DRO Machine Data: Model 50A Serial Number 3878-J
EDM - Wire Erosion APK 240 Heavy Duty Angle Rolls (2013)
Max section modulus 320cm3, power 30kW, roll dia 550mm, shaft dia 240 / 220mm, bending speed 0-7m/min, angle leg out 160 x 20mm / in 150 x 20mm
Rolling Mill CLARK C-500-2-12 MOTORISED DE-COILER
max coil weight 500kg
Coil Processing Plant CLARK C500-2-12DC MOTORISED DE-COILER
Max coil weight 500kg
Coil Processing Plant VICTRON ENERGY PHOENIX MULTIPLUS 24/3000/70 INVERTER/CHARGER
(no further detail)
Electric Various VICTRON ENERGY MULTIPLUS 24/3000/70 INVERTER/CHARGER
True sine wave inverter, adaptive charging,
Electric Various C R CLARKE OVEN/BLOWER/FLUIDISING TANKS
model 400 oven - 350°, model 120 vari-speed blower, 3x model 300 fluidising tanks, 2x model 150 fluidising tanks
Misc Colchester Lathe Specialists
LATHES, LATHES, LATHES are what we do. COLCHESTER LATHES are what we specialise in. SPARES & ACCESSORIES we have in stock. New /used.
Misc VIXEN Blast Cabinet

Misc Nederman Fume extractor with filter (3261)
Nederman Fume extractor with filter. 2002, Fan model 14510521, CTR no. 02060-00, serial no. 521, 0.55kw motor, single phase power
Misc Doosan driven tool holder - Radial (3536)
Doosan driven tool holder - Radial, suitable for Doosan CNC Lathes, BMT65 Size
Misc 680mm Face Plate (8924)
680mm Face Plate, DI-8 fitting
Misc 430mm dia Face Plate (8917)
430mm dia Face Plate, D1-8 fitting
Misc Mazak Static Boring Bar Holder (8705)
Mazak Static Boring Bar Holder, to suit Mazak Smart 350, 50mm bore
Misc Mazak Static Turning Tool Holder (8704)
Mazak Static Turning Tool Holder, to suit Mazak Smart 350, 35mm max square, s/n 5B088002700
Misc Clarke SB30 Blast Cabinet (3504)
Clarke SB30 Blast Cabinet, 2019, s/n 7640115, complete with Fox F50-842 2HP 230V dust extractor, 2020
Misc HSK 40 tooling (3461)
HSK 40 tooling, various
Misc Kitagawa MR250RAE13 Rotary table and MSR181A Tail Spindle (3530)
Kitagawa MR250RAE13 Rotary table and MSR181A Tail Spindle, 2018, Rotary Table - right hand, table dia 250mm, spindle through hole 70mm, centre height 180mm, clamping - pneumatic, Tail Spindle - centre height 180mm, Spindle hole 70mm dia, Motor to...
Misc Cromar Swarf Conveyor (3142)
Cromar Swarf Conveyor, For Cast Iron, 2015, s/n M450001A, Overall dimensions 3,700mm x 1,060mm x 1,700mm high, Drop to floor 1,200mm, Tray opening 2,600mm long x 400mm wide.
Swarf Conveyors and Bins Mazak tool holder - 40VDI Axial (9518)
Mazak tool holder - 40VDI Axial V Type Offset Milling Holder, Unused Our ref:- 9518
Misc Angle plate 2880X1200X810
Reference: EQU005 Model 2880X1200X810 T-slots size 40 N°of T-slots 11 x 2 Distance between T-slots (mm) 200 / 350 Dimensions LxWxH (mm) 2880X1200X810 Weight of the machine (T) 5
Misc 4x tool-holders for Vertical Borer BERTHIEZ J100/J125/J150/9330/9340

Misc AIRMIG Dust Collector
Reference: DIV024
Misc HAAS Servo 300 Magazine Bar Feed
£3,000 + VAT YOM 2000
Misc Engraving Machines bought and sold.
Large selection to suit most applications. GRAVOGRAPH, NEWING HALL, SUREGRAVE etc
Misc SCHIESS Gear Shaper
3,500mm
Shaping SYKES 5E Herringbone Gear Generator
Class Gear Generator – Double Helical, Herringbone Type Horizontal Year 1970’s Stock Control 3631 Price (Price On Application) Description SYKES 5E Gear Generator SYKES Model 5E HORIZONTAL MULTI-CUTTER HIGH PRODUCTION GEAR...
Misc HEY and GIDDINGS AND LEWIS Facing and Centring Machines

Facing and centring Steady rest dia 780mm

Misc Steady Rest

Misc GSP Cube for Radial Drills 800x600x500 mm

Misc FORKARDT Dia 250 Hydraulic Chuck
Reference: MAN001 Model DIAM 250 Spindle bore (mm) 65
Misc KNOLL PF70 Paper FiltrationTank
1988
Tanks and Pans MAPE Vacuum

Misc SICAR R801 Grooving machine
Reference: div028 Model R801 Serial number 2422041 Year 1999
Misc CAZENEUVE Plates for lathe
PLATES FOR LATHE – CAZENEUVE
Misc COSEMA B1A Paper Filtration Tank

Tanks and Pans GSP Cube for radial drills 600x500x450 mm

Misc Radius dresser for grinding machine

Misc Set of Gear Hobs

Misc Cube for radial drills 1000x800x600 / T35

Misc Cube for radial drills 600 x 450 x 320mm

Misc Chuck 3 and 4 jaws, all dimensions

Misc Cube for radial drills 600 x 450 x 500 mm

Misc Cube for radial drills 600x450x320 mm

Misc PICOT RAGACHE HTM 6 CNC Pipe Bender
YOM 1989. Capacity 60mm diameter x 6,000mm, Siemens CNC
Pipe Bending HURON 16084 Dividing Plate

Misc Multifix D2 Type Turret

Misc WOHLHAUPTER UPA 3 Boring Head

Misc Wolhaupter UPA 4 Boring Head

Misc Dufour 250 Bracket

Misc D'ANDREA TS2 Boring Head

Misc Tourteau SECO R220

Misc PBC BM4 High speed spindle for drilling/milling

Misc