Maquinaria Colas for website

rss

Category: Shearing Machines



1255mm x 3.25mm  Undercrank Mechanical Guillotine 1255mm x 3.25mm Undercrank Mechanical Guillotine
Manufacturer: EDWARDS Model: DD Serial No.: 78C/49750 Capacity: 1255mm x 3.25mm Back gauge: By hand rack & pinion Work supports: 2 @ 950mm Input: 420/50/3hz Clamps: Full length mechanical Actuated via: Wander type footswitch Fitted with:...
Shearing Machines
3000mm x 10mm Guillotine 3000mm x 10mm Guillotine
Manufacturer: PROMECAM Model: GH 1030 A Capacity: 3000mm x 10mm Back gauge: Yes Rapid blade adjustment: Yes Shadow-line: Yes Work supports: 2@ 1600mm Squaring arms: 1@ 1600mm Input: 415/3/50hz 18.5 kW Clamps: 16 hydraulic Read-out to...
Shearing Machines
4000mm x 6.5mm Hydraulic Guillotine/Shear. 4000mm x 6.5mm Hydraulic Guillotine/Shear.
Manufacturer: EDWARDS PEARSON Model: VE Serial No.: 92G174 Year of Manufacture: 1992 Capacity: 4080 mm x 6.5 mm Control: Swissax 2000 Back gauge: Programmable Rapid blade adjustment: Yes Shadow-line: Yes Variable rake: Yes Work supports: 2...
Shearing Machines
2550mm x 4mm Hydraulic Guillotine/Shear 2550mm x 4mm Hydraulic Guillotine/Shear
Manufacturer: SAFAN Model: HVR 255-4 Serial No.: B8386 Year of Manufacture: 1998 Capacity: 2550mm x 4mm Control: Safan DNC 100 Back gauge: Programmable Rapid blade adjustment: Yes Variable rake: Yes Work supports: 2 @ 610mm Squaring arms:...
Shearing Machines
Safan VS 310-6 Safan VS 310-6
This Safan VS 310-6 Shearing Machine was built in The Netherlands in 1990. This machine is controlled by an ara aallen control unit. It works with a cutting length 3000 mm and a cutting thickness 6 mm. This machine comes with sharp knives. [Ref:...
Shearing Machines
PASKOWSKY TSH 10 MM PASKOWSKY TSH 10 MM
This PASKOWSKY TSH 10 MM guillotine shear machine was made in Switzerland in the year 1990. It can work with a cutting width 3000 mm and a sheet thickness 10 mm. This guillotine shear works technically faultless. Documentation is available [Ref:...
Shearing Machines
KNUTH KMT 2500/3 KNUTH KMT 2500/3
This KNUTH KMT 2500/3 motorised guillotine shear machine was manufactured in Germany in the year 1994. This machine can work with a cutting width 2520 mm and a sheet thickness 3 mm. The documentation for the machine is available, including...
Shearing Machines
Loire Safe CH-104 Shearing Machine Loire Safe CH-104 Shearing Machine
This Loire Safe CH-104 Shearing Machine was manufactured in the year 2000 in Spain. This machine operates with a shearing force 356 kN, and a shearing length 4000 mm. During the past it has been working with steel of 10 mm max thickness. [Ref:...
Shearing Machines
ADIRA GVX 2030 Shearing Machine ADIRA GVX 2030 Shearing Machine
This ADIRA GVX 2030 Shearing Machine was manufactured in the year 2002 in Portugal. It is equipped with a Cybelec 60 GS control unit. It can work with a shearing length 3000 mm. In the past this machine has been working with 20 mm steel max...
Shearing Machines
EHT VarioCut 16-80 EHT VarioCut 16-80
This EHT VarioCut 16-80 Shearing Machine was built in the year 2015 in Germany. It can work with a cutting length 8050 mm, a knife length 8200 mm and a cutting angle 1º 35'. [Ref: DE-SHE-EHT-2015-00001]
Shearing Machines
GEKA ALPS-150 GEKA ALPS-150
This GEKA ALPS-150 was manufactured in the year 2008 in Spain and has worked during 400 production hours. This machine is a complete automatic solution for punching, marking and shearing of angles for medium and large sized steel profiles. With...
Shearing Machines
SOMERTEKNO OY 2547 Shearing machine SOMERTEKNO OY 2547 Shearing machine
This SOMERTEKNO OY 2547 Shearing machine was built in Finland in 2004. It has been on for approximately 56000 hours. It is equipped with a control unit of the same brand. The machine has been producing steel slitting and sheet making for steel...
Shearing Machines
HACO HSLX 4014 Shearing Machine HACO HSLX 4014 Shearing Machine
This HACO HSLX 4014 Shearing Machine was made in Turkey in 2016. It has been working for 50 hours. This machine can operates with a shearing length 4150 mm and a max steel thickness of 16 mm. [Ref: SK-SHE-HAC-2016-00001]
Shearing Machines
LVD MVC 12 LVD MVC 12
Make: ayce Type: hydraulic-shears Capacity: 12 x 4100 mm [Ref: hydraulic-shear-lvd-mvc-12-11-567sm]
Shearing Machines
Durma MS1303 Durma MS1303
Type: mechanical-shears Model: MS 1303 Capacity: 3 mm x 1350 mm R.P.M.: 35 strokes per minute kW: 3 Volts: 400v Cycles: 50 [Ref: durma-ms1303-12-461s1]
Shearing Machines
PEDDINGHAUS 210 Super 16 Combines Section Shear 1983 PEDDINGHAUS 210 Super 16 Combines Section Shear 1983
round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l...
Shearing Machines
Edwards Pearson DD Guillotine #78501 Edwards Pearson DD Guillotine #78501
Edwards Pearson DD (Direct Drive) Guillotine / Metal Shear 1250mm x 3.5mm Cutting Capacity Manual Rack & Pinion Back Gauge Single & Continuous Cutting Triple Front Supports Finger Guards #78501
Shearing Machines
EDWARDS DD 2500/3.25 DIRECT DRIVE MECHANICAL SHEAR EDWARDS DD 2500/3.25 DIRECT DRIVE MECHANICAL SHEAR
length 2530mm, capacity 3.25mm, PBG, front supports, squaring arm, wandering footpedal
Shearing Machines
HACO TS 3012 HYDRAULIC SHEAR HACO TS 3012 HYDRAULIC SHEAR
Length 3050mm, capacity 12mm, backgauge travel 1000mm, power backgauge, blade gap adjustment, variable rake, squaring arm, front supports, wandering footpedal
Shearing Machines
LVD HST 3/16 HYDRAULIC SHEAR LVD HST 3/16 HYDRAULIC SHEAR
Length 3100mm, capacity 6.35mm, power backgauge, blade gap adjustment, variable rake, squaring arm, front supports
Shearing Machines
EDWARDS PEARSON  DD 2500/3.5 DIRECT DRIVE MECHANICAL SHEAR EDWARDS PEARSON DD 2500/3.5 DIRECT DRIVE MECHANICAL SHEAR
Length 2530mm, capacity 3.5mm, blade gap adjustment, rack & pinion backgauge, squaring arm, front supports, wandering footpedal
Shearing Machines
MORGAN RUSHWORTH DG 1500/3.5 DIRECT DRIVE MECHANICAL SHEAR MORGAN RUSHWORTH DG 1500/3.5 DIRECT DRIVE MECHANICAL SHEAR
Length 1530mm, capacity 3.5mm, motor 5.5kw, leadscrew backgauge, wandering footpedal, rear guard
Shearing Machines
SAFAN VS 310-4 HYDRAULIC SHEAR SAFAN VS 310-4 HYDRAULIC SHEAR
Length 3100mm, capacity 4mm, power backgauge, variable rake angle, rear sheet support system, squaring arm, front supports, wandering footpedal
Shearing Machines
NEW ACCURL MS8-6x3200 CNC HYDRAULIC VARIABLE RAKE GUILLOTINE SHEAR NEW ACCURL MS8-6x3200 CNC HYDRAULIC VARIABLE RAKE GUILLOTINE SHEAR
Length 3200mm, capacity 6mmm, Elgo P40T Touch screen control - rake angle / blade gap / stroke length / backgauge travel / stroke counter, Pneumatic rear sheet support system, Rear safety guarding, wandering footpedal, squaring arm, front support...
Shearing Machines
HM S650M POWERED SHEAR HM S650M POWERED SHEAR
Length 650mm, capacity 1.25mm, motor 0.37kw, wandering footpedal, rear guard, hand backgauge. MACHINE UNUSED.
Shearing Machines
MORGAN RUSHWORTH SC 1500/6 MECHANICAL SHEAR MORGAN RUSHWORTH SC 1500/6 MECHANICAL SHEAR
Length 1530mm, capacity 6mm, motor 7.5kw, squaring arm, front supports, wandering footpedal, leadscrew backgauge with readouts, rear safety guard
Shearing Machines
NEW: DURMA MS 2504 MANUAL SHEAR NEW: DURMA MS 2504 MANUAL SHEAR
SPECIAL STOCK PRICE: £18,500 + VAT Capacity 2550 X 4mm Standard Equipment D-Touch 7 Touchscreen NC Control Unit-User Friendly Motorised back gauge with digital readout 750mm travel Finger protection Portable foot control with...
Shearing Machines
AFM Model MK6-31 - 3000mm x 6mm Capacity Hydraulic Variable Rake Guillotine Shear (3348) AFM Model MK6-31 - 3000mm x 6mm Capacity Hydraulic Variable Rake Guillotine Shear (3348)
AFM Model MK6-31 - 3000mm x 6mm Capacity Hydraulic Variable Rake Guillotine Shear. Including ELGO P8721 Programmable Back Gauge, Blade Gap Adjustment. 3 x Front Sheet Supports, 1 x Squaring Arm. New 1999.
Shearing Machines
Pearson Power Shear 3m x 6mm Pearson Power Shear 3m x 6mm
PHOTOS TAKEN ON SITE PRIOR TO ARRIVAL AT RONDEAN Manufacturer Pearson Model: Hydraulic Guillotine Capacity (mild steel): 3000 x 6mm Equipment: Power Back Gauge Front Sheet Supports Power: Three Phase Electrics Approx...
Shearing Machines
EDWARDS Treadle Shears EDWARDS Treadle Shears
Various sizes available Call for details 0191 410 5886 With video
Shearing Machines



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy