GD Machinery

rss

Category: EDM - Spark Erosion

Electrical discharge machining, spark eroder, burning, die sinking

AGIE Agietron Compact 3 Erosion Machine AGIE Agietron Compact 3 Erosion Machine
This AGIE Agietron Compact 3 Erosion Machine was manufactured in the year 1996 in Switzerland. It is equipped with a control unit of the same brand. This machine works with a table size of 800 x 600 mm. Machine in very good condition. [Ref:...
EDM - Spark Erosion
AGIE Agiecut Classic 2S Erosion Machine AGIE Agiecut Classic 2S Erosion Machine
This AGIE Agiecut Classic 2S Erosion Machine was manufactured in the year 2000 in Switzerland. It has only 7136 working hours and is equipped with an Agie Agievision control unit. This 3-axis machine works with a wire diameter of 0.2 ÷ 0.33 mm. It...
EDM - Spark Erosion
Charmilles Form 2-LC Erosion machine Charmilles Form 2-LC Erosion machine
This Charmilles Form 2-LC Erosion machine was manufactured in the year 1994 in Taiwan. It is equipped with a Charmilles Technologies control unit and has 3 axis. The machine has a table of 500 x 350 mm and includes a Wizard 3 Axis DRO as additional...
EDM - Spark Erosion
AGIE Agiecut Classic 3s Erosion Machine AGIE Agiecut Classic 3s Erosion Machine
This AGIE Agiecut Classic 3s Erosion Machine was manufactured in the year 2003 in Switzerland. It can work with a wire speed of 60 ÷ 300 mm/s. This machine presents good working conditions. [Ref: DE-EDM-AGI-2003-00001]
EDM - Spark Erosion
AGIE Innovation 3 Erosion machine AGIE Innovation 3 Erosion machine
This AGIE Innovation 3 Erosion machine was made in 2006 in Switzerland and has 34864 production hours. It is controlled by an Agievision 2 TRON04.01.04 control unit. The machine has a table of 800 x 600 mm. [Ref: SI-EDM-AGI-2006-00002]
EDM - Spark Erosion
AGIE Agiecut VERTEX 3 Erosion machine AGIE Agiecut VERTEX 3 Erosion machine
This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit. [Ref: SI-EDM-AGI-2006-00001]
EDM - Spark Erosion
Mitsubishi FX 20 Erosion machine Mitsubishi FX 20 Erosion machine
This Mitsubishi FX 20 Erosion machine was manufactured in the year 1997 in Japan. The machine has a working area of X=500 mm , Y=350 mm, Z=300 mm, U=15° and V=15°. [Ref: SI-EDM-MIT-1997-00001]
EDM - Spark Erosion
Makino EDNC 43 Erosion machine Makino EDNC 43 Erosion machine
This Makino EDNC 43 Erosion machine was built in the year 2004 in Germany. It is equipped with a Makino MGH control unit. The machine has a lead wire size of 6 mm^2. [Ref: NL-EDM-MAK-2004-00001]
EDM - Spark Erosion
Apos 600 Erosion machine Apos 600 Erosion machine
This Apos 600 Erosion machine was manufactured in the year 1999 in Germany. [Ref: NL-EDM-APO-1999-00001]
EDM - Spark Erosion
SODICK AQ35L Erosion machine SODICK AQ35L Erosion machine
This SODICK AQ35L Erosion machine was manufactured in the year 1999 and has 54000 production hours, of which 17350 are working hours. It is equipped with a Sodick LN1 control unit. The machine has an Electrode magazine of 32 positions. [Ref:...
EDM - Spark Erosion
Sodick AQ327L Erosion machine Sodick AQ327L Erosion machine
This Sodick AQ327L Erosion machine was manufactured in the year 2006. It is equipped with a Sodick SQ33W control unit. [Ref: HU-EDM-SOD-2006-00001]
EDM - Spark Erosion
Sodick AG 60L Erosion machine Sodick AG 60L Erosion machine
This Sodick AG 60L Erosion machine was manufactured in the year 2013 and has 11000 hours. It is equipped with a Sodick LN2 control unit. The machine has a distance between tabletop and electrode holder of 200 - 570 mm and an Electrode Max weight of...
EDM - Spark Erosion
Sodick AQ537L Erosion Machine Sodick AQ537L Erosion Machine
This Sodick AQ537L Erosion Machine was made in the year 2007. It is equipped with a Sodick LQ33W control unit. This machine has a wire diameter of 0,15 - 0,33 mm. [Ref: IT-EDM-SOD-2007-00001]
EDM - Spark Erosion
AccuteX AU-860iA Wire EDM AccuteX AU-860iA Wire EDM
This AccuteX AU-860iA Wire EDM was manufactured in the year 2020. It is equipped with a Windows CE controller control unit. The machine has standard wire diameter of 0.15 to 0.33 mm. [Ref: DE-EDM-ACC-2020-00001]
EDM - Spark Erosion
OPS Ingersoll Gantry 5000 Erosion machine OPS Ingersoll Gantry 5000 Erosion machine
This OPS Ingersoll Gantry 5000 Erosion machine was manufactured in the year 2002 in Germany and has 72500 erosion hours. The machine has an Erowa IMC Robot for changing electrodes and workpieces. [Ref: SI-EDM-OPS-2002-00001]
EDM - Spark Erosion
Fanuc Robocut Alpha-0iA Erosion machine Fanuc Robocut Alpha-0iA Erosion machine
This Fanuc Robocut Alpha-0iA Erosion machine was manufactured in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. [Ref: ES-EDM-FAN-2000-00002]
EDM - Spark Erosion
Agie Challenge 2 Erosion machine Agie Challenge 2 Erosion machine
This Agie Challenge 2 Erosion machine 3 was manufactured in the year 2000. It is equipped with a AGIEVISION control unit. The machine has a wire diameters of 0.20 - 0.33 mm [Ref: AE-EDM-AGI-2000-00001]
EDM - Spark Erosion
MITSUBISHI MV1200S Wire Erosion machine MITSUBISHI MV1200S Wire Erosion machine
This MITSUBISHI MV1200S Wire Erosion machine was manufactured in the year 2016 in Japan and has only 680 production hours. It is equipped with a MITSUBISHI W31MV-2 control unit. The machine has wire diameters of 0.1 – 0.3 mm, is in very good...
EDM - Spark Erosion
AGIE AGIECUT 150 HSS Erosion machine AGIE AGIECUT 150 HSS Erosion machine
This AGIE AGIECUT 150 HSS Erosion machine was built in 1994 in Switzerland. It is equipped with an Agie Agiematic CF control unit. The machine has a wire diameter of 0,1 - 0,33 mm. [Ref: DE-EDM-AGI-1994-00001]
EDM - Spark Erosion
AGIE AGIECUT CHALLENGE 3 erosion machine AGIE AGIECUT CHALLENGE 3 erosion machine
This AGIE AGIECUT CHALLENGE 3 erosion machine was made in the year 2000 in Switzerland. It is equipped with an Agie Agievision control unit. [Ref: DE-EDM-AGI-2000-00001]
EDM - Spark Erosion
Makino SP64 Wire erosion machine Makino SP64 Wire erosion machine
This Makino SP64 Wire erosion machine was manufactured in the year 2006 in Germany and has 40570 production hours. It is equipped with a MGW- 95 control unit. [Ref: NL-EDM-MAK-2006-00001]
EDM - Spark Erosion
CHARMILLES Roboform 4000 Erosion machine CHARMILLES Roboform 4000 Erosion machine
This CHARMILLES Roboform 4000 Erosion machine was made in Switzerland in 1995. It operates with a ta workpiece X of 1100 mm, workpiece Y of 780 mm, workpiece Z of 325 mm, and a maximum capacity of 390l. [Ref: ES-EDM-CHA-1995-00001]
EDM - Spark Erosion
This AGIE Excellence 2F Erosion Machine was built in 2001 in Switzerland This AGIE Excellence 2F Erosion Machine was built in 2001 in Switzerland
This AGIE Excellence 2F Erosion Machine was built in 2001 in Switzerland. It has 5 axis. The machine has a workpiece dimension of 750 x 550 x 250 mm. [Ref: DE-EDM-AGI-2001-00001]
EDM - Spark Erosion
Sodick Ex20 Wire Eroder EX20 Sodick Ex20 Wire Eroder EX20
Sodick Ex20 Wire Eroder - was a running machine prior to disconnection and removal. [Ref: 106359]
EDM - Spark Erosion
AGIE ACTSPARK SE1 Spark Eroder (3868) AGIE ACTSPARK SE1 Spark Eroder (3868)
AGIE ACTSPARK SE1 Spark Eroder, 2001, s/n 007-010, SE50 CNC Control, C-axis, 4 station ATC, Max work piece dimension 740 x 450 x 260mm, Work tank Dimensions 1,000 x 550 x 260mm, Work table dimensions 500 x 320mm, Work tank capacity 150 litres,...
EDM - Spark Erosion
EUROSPARK 900 Spark Erosion Machine EUROSPARK 900 Spark Erosion Machine
Table size 550 x 350mm, area covered by quill 290 x 195mm, work tank size 645 x 415mm, vertical and cross servos, generator output 50/10 Amp, System 3R with Orbi-Cut, DRO.
EDM - Spark Erosion
HURCO 900 Mark 2 Spark Erosion Machine HURCO 900 Mark 2 Spark Erosion Machine
Table size 550 x 350mm, area covered by quill 290 x 195mm, work tank size 645 x 415mm, servo stroke 280mm, generator output 50/10 Amp, riser block, System 3R, DRO. Checked over and serviced.
EDM - Spark Erosion
FANUC Tape Cut W1 Wire Eroder. Ref 28909 FANUC Tape Cut W1 Wire Eroder. Ref 28909

EDM - Spark Erosion
Eurospark 740 Precision Spark Eroder (3634) Eurospark 740 Precision Spark Eroder (3634)
Eurospark 740 Precision Spark Eroder, s/n 4117-J, 50 AMP Pulse generator, 2 axis Newell DRO, WorkableEurospark size 430 x 305mm, Area covered by quill 290 x 195mm, Work tank size 550 x 345mm, travel of quill 280mm, max distance electrode support to...
EDM - Spark Erosion
EDM Machine SODICK Type AD325L. Year 2008 EDM Machine SODICK Type AD325L. Year 2008

EDM - Spark Erosion
CNC EDM Fanuc Alpha 1. Fanuc 16W CNC EDM Fanuc Alpha 1. Fanuc 16W

EDM - Spark Erosion
ONA Prima S-400 AWF 4-Axis CNC Wire EDM ONA Prima S-400 AWF 4-Axis CNC Wire EDM
Traverses X Y Z: 600 x 400 x 400mm, U & V travels 80 x 80mm, max workpiece size 1,090 x 800 x 400mm, max taper angle +/-18º/100mm (max +/-30º/45mm), table 840 x 360mm, wire diameter 0.1-0.3mm, submerged cutting. C/w ONA CNC control, low-volt...
EDM - Spark Erosion
ONA Prima S-250+AWF 4-Axis CNC Wire EDM ONA Prima S-250+AWF 4-Axis CNC Wire EDM
Max part size 37.7 x 25.6 x 7.87in, X-axis travel 13.77in, Y-axis travel 9.84in, Z-axis travel 7.87in, U-axis travel 3.14in, V-axis travel 3.14in, max workpiece 770 lbs, max taper angle +/-18º/100mm. C/w ONA CNC control, auto wire feeder
EDM - Spark Erosion
Agie Classic Cut 5-Axis Non-Submerged CNC Wire Erosion Machine Agie Classic Cut 5-Axis Non-Submerged CNC Wire Erosion Machine
With auto wire thread. YOM 1999
EDM - Spark Erosion



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy