Ex MoD COLCHESTER Student 1800 x 25in Straight Bed Imp
Slides as new with quiet headstock. Original paintwork. C/w 3- & 4-jaw chucks, new two axis dro, quick-change toolpost & holders, bedstop, coolant, excellent bed & headstock. Warranty. Extra accessories available: DRO, Ainjest, copy...
Lathes - general HACO MAXI 250/6 CORNER NOTCHER
Capacity 6mm, length 250mm, adjustable angle guides, rules in table, light, wandering footpedal
Sheet metal-working 2016 QUASER MV1845/12B. Heidenhain 620 with full 4th axis

Machining centres Heidenreich & Harbeck B3 SB Deep Hole Borer
Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation
Boring - deep hole Refurbished Used BODE 20 Tonne Self Aligning Rotators. £9,500

Welding and Cutting Machinery Used Axminster RF-31 Mill/Drill (4955)
Used Axminster RF-31 Mill/Drill, 2006, s/n634910, Table travel X-500mm, Y - 175mm, Table size 730 x 210mm, Drilling capacity 32mm, Face Mill capacity 76mm, End Mill capacity 20mm, Spindle taper 3MT, Spindle strock 130mm, Head swivel 360 degrees,...
Drilling CARTER 2550X4 HYDRAULIC SHEAR
Length 2550mm, capacity 4mm, programmable power backgauge, rear guard, rear sheet supports, squaring arm, front support, wandering footpedal
Shearing Machines MORGAN RUSHWORTH PIPR 2600/3.5 INITIAL PINCH BENDING ROLLS
Length 2600mm, capacity 3.5mm, roll dia 160mm, motor 2.2kw, top roll slip, safety STOP kick plates, forward / reverse footpedal, power rise & fall to back roll
Bending Doosan Puma 700L CNC Lathe (2014)
Swing over bed 1030mm, Swing over saddle 800mm, Maximum turning diameter 900mm, maximum turning length 3200mm, hole through spindle 164mm, Spindle speed 1,500 rpm, spindle power 45/37KW, 12 station turret, Fanuc 32i control. 3 jaw chuck, Swarf...
Lathes - CNC Doosan Lynx 300 with Fanuc control, tool setter, swarf conveyor. Superb!
Year 2014
Lathes - CNC Doosan Puma MX2600ST Multi Axis CNC Lathe (2014)
1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling @ 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm,22kW...
Lathes - CNC Danobat CP11.11 Bandsaw 2009
Danobat CP11.11 Horizontal Bandsaw Serial Number 0909901302 Year 2009 Max Size 1100mm x 1100mm Variable Danobat CP11.11 Horizontal Bandsaw Serial Number 0909901302 Year 2009 Max Size 1100mm x 1100mm Variable Speed Front & Rear Tables Total...
Sawing - metal Devlieg 2B-36 Jig Borer
DEVLIEG 2B-36 JIGMIL (Fully refurbished and repainted) Table Area: 36”/914mm x 24”/610 Horizontal Travel: 36”/914mm. Vertical Travel: 24”/610mm. Spindle Bar Travel: 12”/305mm. Platten Table Travel: 12”/305mm. Spindle Bar Diameter:...
Boring XYZ ProtoTrak LPM Vertical Machining Centre
Excellent clean condition including tool-setting jig. Very little use and in excellent working order. Quiet, accurate machine. Tool-setting jig new three years ago. Still powered up and can be seen working. £12,000 + VAT Regularly...
Machining centres DAEWOO Puma CT250 CNC Lathe with Fanuc 21i-T. Swarf Conveyor. Year 2002
Ref 30236
Lathes - CNC Colchester Triumph VS2500 Gap Bed Lathe
Colchester Triumph VS2500 Gap Bed Lathe Immaculate Condition 50" Between Centres Spindle Speeds 75-2500 rpm Swing over bed 400mm Swing over cross slide 246mm Spindle Bore 54mm 2 Axis DRO Newall NMS3000 Interlocked chuck Guard Metric...
Lathes - general Sunnen GH210 x 10000mm Horizontal Hone
Sunnen GH210 x 10000mm Horizontal Hone 10,000mm Stroke, Spindle Speed:0 – 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches...
Honing KRV2000 Turret Milling Machine With Power Feed
Good condition and in working order. This machine can go straight to work. £1,800 + VAT
Milling Brother TC-S2DN-O Drilling and Tapping machine
New 2012, tooling, mist extractor, swarf conveyor, BT30, speeds to 16000rpm, X=700 Y=400 Z=300mm, 50m/min rapids(21149) £P.O.A
Drilling - tapping Used Harrison M500 x 60" Gap Bed Lathe (4942)
Used Harrison M500 x 60" Gap Bed Lathe, 1986, s/n M502310 2130, DRO, metric dials, centre height 260mm, swing in gap 730mm, spindle bore 80mm, 31-1600rpm, Digital Readout, 9.2kw, 3 & 4 Jaw Chucks, 2 & 3 Pt Steadies, 2 Faceplates - 450 & 670mm, qctp...
Lathes - general