COLCHESTER Triumph 2500VS Gap Bed Centre Lathe
Swing 400mm x 1,250mm between centres, spindle bore 54mm, spindle speeds 13-2,500rpm. C/w 3-jaw chuck, DRO
Lathes - general Ex Demo 750 LR - Arm Type (2024)
[div class="dmach-acf-value "][p]• Siemens 828 with 10.4in Display[br /] • Siemens 20hp Spindle Motor[br /] • 10 – 8,000 rpm (12,000 rpm Optional)[br /] • 750 x 440 x 500mm Travels (X,Y,Z)[br /] • 24 Station Arm Type Tool Changer[br /] •...
Misc COLCHESTER Mascot 1600 x 60in Gap Bed Imperial
Very good condition. C/w 3- & 4-jaw chucks, new 2-axis to be fitted, quick-change toolpost & 4-off holders, fixed steady, faceplate, bedstop, rotating centres, drill chuck, coolant. Original slides from new, negligible use &...
Lathes - general KIHEUNG U1000 CNC Bed Mill (2011)
Table size 3,100 x 900mm, traverses X Y Z: 3,100 x 1,200 x 1,050mm, spindle taper DIN50, toolchanger capacity: 24 stations, spindle speed 4,000rpm, automatic head, swarf conveyor. POA
Milling - NC/CNC WALTON TSR/4/80P Powered Initial Pinch Rollers. 80in x 4in, slip top roll. £3,750

Sheet metal-working XYZ CT65 CNC Lathe (2019)
400mm swing, 220mm max turning dia, 510mm cutting length, Siemens 828 control, 65mm bar capacity, 12-station turret, 17kW spindle motor, spindle speed 4,500rpm, 3-jaw chuck, low-volt light, coolant, tool setter, tailstock,...
Lathes - CNC WALTON WPG/1250/3 Direct-Drive Guillotine
1,250mm x 3mm, r.b.g., hand back stop. 2003 m/c. £4,500
Sheet metal-working MORGAN MBR 2500/10 POWER BENDING ROLLS
Length 2500mm, capacity 10mm, top roll dia 254mm, lower rolls dia 203mm, motor 7.5kw, wire grooves, manual drop end, safety STOP kick plates
Bending Hardinge Talent 8/52 SV Slant Bed CNC Lathe with Fanuc 0i control
tailstock, parts catcher and parts collector, 8” chuck, 52mm bore. YOM 2006
Lathes - CNC Used Tombstone for CNC Horizontal Machining Centres (5059)
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 400mm. Cast Iron, Base size 485 x 485mm, working surface 350 x 490mm x 2 and 150 x 490mm x 2, Total height from bottom of the base 580mm, Full grid fixture on all faces
Misc ROUNDO R-3-S SECTION ROLLING MACHINE
Shaft dia 85mm, capacity box section 65 x 65 x 6mm / angle 80 x 80 x10mm / flat bar 180 x20mm ( on flat ), lateral guide rollers, hyd adj of lower shafts, hor/vert working positions
Ring Rollers Demoor Hollow Spindle CNC Lathe 825-360
Machine will be fully run and checked complete with totally overhauled control system Key Specifications: • 14 1/4” Hollow Spindle • 39” Swing Over Bed • 21” Swing Over Saddle • 13.1ft Maximum Turning Length Between Centres Control...
Lathes - CNC MACH VMC 710 MM+ with Fanuc 0iTF 10.4” with AiCC graphic display & 2Gb memory
12,000RPM BBT40 chilled direct-drive spindle, 48m/min rapids, 24-tool side-mount tool changer & chip auger. YOM 2020
Machining centres 2012 DMG DMF 180-7 Vertical Machining Centre
Siemens 840 D Solutionline, table size 2,100 x 700mm, travels X/Y/Z 1,800/700/700mm, rapids X/Y/Z 40m/min, spindle speeds ~14,000rpm, spindle motor 18.9/14kW, SK40, ATC 30, swarf conveyor, max workpiece weight 1,500kg, power...
Machining centres XYZ LPM Vertical Machining Centre with ProtoTrak PMX Control. Year 2017. Ref 30340

Machining centres Used Tombstone for CNC Horizontal Machining Centres (5059A)
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 400mm. Cast Iron, Base size 485 x 485mm, working surface 350 x 490mm x 2 and 150 x 490mm x 2, Total height from bottom of the base 580mm, Full grid fixture on all faces
Misc 2008 DMG HSC 75 Linear 5-Axis Universal Machining Centre
Heidenhain iTNC 530, travels X/Y/Z: 750/600/ 560mm, A/B-axis (tilt) -10º to +110º, C-axis (rotational) 360º. ***New Spindle 2026*** Spindle speeds ~28,000rpm, HSK-A 63, ATC 60, max tool dia 80/140mm, max tool length 300mm, NC...
Machining centres 2012 DMG DMC 80 U + RS 5-Pallet System 5-Axis Universal Machining Centre
Siemens 840 D Solutionline, travels X/Y/Z 800/1,050/800mm, B-axis, C-axis, spindle speeds ~8,000rpm, spindle power 28/19kW, SK50, ATC 240, RS 5-pallet system, pallet size 800 x 630mm, number of pallets 7, swarf conveyor, 40...
Machining centres DECKEL Model SOE Single-Lip Cutter Grinder
1997. 4,500rpm grinding wheel speed, full equipment including SOE projector. Collets and drill grinding attachment. Condition as new
Grinding ORT RP30 Plunge & Through-Feed Thread Rolling Machine (1990)
Max pressure 30 tonnes, max workpiece dia 100mm, max die width 200mm, spindle dia 69.85mm, spindle speeds 30-90rpm, main motor 20kW. Selection of roll dies.
Roll Forming