New 1980’s Country of origin UKRebuilt 2018General SpecificationsMaximum grinding diameter 3″Swing over table 5″Maximum table travel 13-3/4 Min.Capacity between centers 12″Table swivels either way 10 Deg.Table travel per rev. of handwheel 0.44″Hydraulic table traverse 0 to 120″/Min.Dwell (carriage) 0 to 8 SecondsCoolant capacity (standard machine) 11 gallons(with clarifier) 23 gallonsCoolant pump motor 1/12 H.P.Net weight 2,226 Lbs.Wheelhead (all graduations, on work diameter)Total travel by feedscrew 3-7/8″Hydraulic rapid retraction 1-1/8″In-feed per revolution of handwheel 0.04″Wheelfeed graduations 0.0002″Fine feed to dead stop 0.00005″Total plunge in-feed 0.025″Plunge feed-rate, max. 0.125″/minPlunge feed-rate, min. 0.0025″/minIntermittent in-feed, coarse, max. 0.002″Intermittent in-feed, fine, min. 0.00005″Spark out0-50 secondsWheel speeds 1830 and 1988 rpmGrinding wheel (recessed) 12″ x 1-1/2″ x 5″Minimum wheel diameter for zero work diameter 10″Wheelhead motor 3 HP WorkheadWorkspeeds, steplessly variable 50 to 900 rpmCapacity through standard drawtube 3/4″Maximum collet capacity 3/4″ Workhead motor 1/2 HP Hydraulic Power Pack Normal operating pressure 200 Lbs/in Maximum operating pressure 230 Lbs/in Tank capacity 6-1/2 Gallons Pump motor 1/2 HPPlain Workhead and TailstockCoolant SystemHyd Tbl Traverse w/ Dwell CtrlHyd Advance/Retract of the Wheelhead Auto Hyd Wheelhead Infeed on Traverse & Plunge GrindingSparkout Dwell Timer & Auto Wheelhead Retraction Category: Grinding Seller's location: Northants, UK To see the seller's contact details please use the contact form below. The seller confirmed the item was still for sale on: 21 Dec 2020