Bodor

rss

Category: Plastics Plant

plastic

HAITIAN SA 1600-600 HAITIAN SA 1600-600
This HAITIAN SA 1600-600 Injection Moulding Machine was manufactured in China in the year 2011. This machine works with a clamping force 1600 kN and a screw speed 0-257 rpm.[Ref: EG-INJ-HAI-2011-00001]
Plastics Plant
Netstal Synergy 1000-230 Injection Moulding Machine Netstal Synergy 1000-230 Injection Moulding Machine
This Netstal Synergy 1000-230 Injection Moulding Machine was built in Switzerland in 1999. It has 96797 production hours. This machine can operate with a clamping force of 1000 kN and a force of injection of 182 kN.[Ref: CH-INJ-NET-1999-00001]
Plastics Plant
BOLE BL 100EKII - C340 BOLE BL 100EKII - C340
This BOLE BL 100EKII - C340 Injection Moulding Machine was manufactured in the year 2019. This machine has a clamping force 1000 kN and an ejector stroke 100 mm.[Ref: DE-INJ-BOL-2019-00001]
Plastics Plant
MAPLAN MTF2000/250 MAPLAN MTF2000/250
This MAPLAN MTF2000/250 Injection Moulding Machine was built in Austria in the year 2007. This machine performs with a clamping force 4000 kN and an injection capacity 2000 cm3. It has a heating control available.[Ref: HU-INJ-MAP-2007-00001]
Plastics Plant
Welltec 320F2 Injection Moulding Machine Welltec 320F2 Injection Moulding Machine
This Welltec 320F2 Injection Moulding Machine was manufactured in the year 2007. This machine incorporates clamping force of 3200 kN and a screw diameter of 60 mm.[Ref: CZ-INJ-WEL-2007-00001]
Plastics Plant
Krauss Maffei 2700/19000 MC Injection Moulding Machine Krauss Maffei 2700/19000 MC Injection Moulding Machine
This Krauss Maffei 2700/19000 MC Injection Moulding Machine was made in 1999 in Germany. This powerful machine incorporates a clamping force of 27000 kN and an injection pressure of 1707 bar.[Ref: ES-INJ-KRA-1999-00001]
Plastics Plant
BORCHÊ BS200 BORCHÊ BS200
This BORCHÊ BS200 Injection Moulding Machine was built in the year 2012. It has been operative for 8047 hours. This machine is equipped with a KEBA control unit. It has a clamping force 2000 kN and an ejector stroke 150 mm. This includes a nitrided...
Plastics Plant
Husky GL225 RS70/60 Husky GL225 RS70/60
This Husky GL225 RS70/60 Injection Moulding Machine from 1997 was built in Canada. It has been operative for approximately 72400 hours. This machine is equipped with a Fanuc Control unit. It has a clamping force 2250 kN and an ejector force 75 kN....
Plastics Plant
ENGEL Vc 5160/260 ENGEL Vc 5160/260
This ENGEL Vc 5160/260 Injection Moulding Machine was manufactured in Germany in the year 2019 and it has never been used before. It incorporates a clamping force of 2600 kN and an opening stroke 909 mm. This machine is equipped with several options...
Plastics Plant
Battenfeld HM2000/19000 Injection Moulding Machine Battenfeld HM2000/19000 Injection Moulding Machine
This Battenfeld HM2000/19000 Injection Moulding Machine was built in the year 2004. It has 93336 production hours. This machine can work with a clamping force 20000 kN, and a screw diameter 135 mm.[Ref: PL-INJ-BAT-2004-00002]
Plastics Plant
Battenfeld 2000/19000 Battenfeld 2000/19000
This Battenfeld 2000/19000 Injection Moulding Machine was manufactured in the year 2004. It is equipped with a control unit of the same brand. This machine can work with a clamping force 20000 kN, a screw diameter 135 mm and a screw speed 160 rpm....
Plastics Plant
Arburg ALLROUNDER 920 S 5000 - 1300 / 400 injection moulding machine Arburg ALLROUNDER 920 S 5000 - 1300 / 400 injection moulding machine
This Arburg ALLROUNDER 920 S 5000 - 1300 / 400 injection moulding machine was built in 2018 in Germany. It is operated through a ARBURG SELOGICA control unit. This machine has a clamping force of 5000 kN. It has approximately 4500 hours.[Ref:...
Plastics Plant
Arburg ALLROUNDER 270 C 300-100 injection moulding machine Arburg ALLROUNDER 270 C 300-100 injection moulding machine
This Arburg ALLROUNDER 270 C 300-100 injection moulding machine was manufactured in Germany in the year 1998. It has 83679 production hours. This machine perform with a clamping force 300 kN, and a screw diameter 20 mm.[Ref: CH-INJ-ARB-1998-00002]
Plastics Plant
Arburg ALLROUNDER  270 C 300-100 injection moulding machine Arburg ALLROUNDER 270 C 300-100 injection moulding machine
This Arburg ALLROUNDER 270 C 300-100 injection moulding machine was made in 1998 in Germany. It has 85264 production hours. This machine work with a clamping force 300 kN, and a screw diameter 20 mm.[Ref: CH-INJ-ARB-1998-00001]
Plastics Plant
Netstal Synergy 600-110 Netstal Synergy 600-110
This Netstal Synergy 600-110 Injection Moulding Machine was manufactured in Switzerland in the year 1997. It has 109650 production hours. This machine can operate with a clamping force of 600 kN and a force of injection 111 kN. It includes...
Plastics Plant
Arburg ALLROUNDER 270 C 300 - 100 Arburg ALLROUNDER 270 C 300 - 100
This Arburg ALLROUNDER 270 C 300 - 100 injection moulding machine was built in the year 1998 in Germany. It has 22889 production hours. It can operate with a clamping force 300 kN, and a screw diameter 20 mm.[Ref: CH-INJ-ARB-1998-00003]
Plastics Plant
Battenfeld BA 800/125 CDC Battenfeld BA 800/125 CDC
This Battenfeld BA 800/125 CDC Injection Moulding Machine was built in the year 1998. This machine can work with a clamping force of 800 kN. It has a record of 53278 production hours. This machine works with a screw diamter 15 mm. This Battenfeld...
Plastics Plant
Netstal SYNERGY 600-60 Netstal SYNERGY 600-60
This Netstal SYNERGY 600-60 Injection Moulding Machine was built in 1999. It has 96833 production hours. This machine is operated with a control unit of the same brand. It can work with a clamping force 600 kN and an injection pressure 210 bar.[Ref:...
Plastics Plant
Krauss Maffei 40-55 C2 Krauss Maffei 40-55 C2
This Krauss Maffei 40-55 C2 Injection Moulding Machine was manufactured in 2005. It has 60591 production hours. This machine operates with a clamping force 400 kn and an injection screw diameter 20 mm.[Ref: CH-INJ-KRA-2005-00001]
Plastics Plant
Krauss Maffei 40-55 C2 Injection Moulding Machine Krauss Maffei 40-55 C2 Injection Moulding Machine
This Krauss Maffei 40-55 C2 Injection Moulding Machine was built in 2003 in Germany. It has 70039 production hours. This machine can work with a clamping force 400 kn, and a screw diameter 20 mm. The screw is of high wear resistant design for...
Plastics Plant
Arburg ALLROUNDER 270 C 500 - 200 Arburg ALLROUNDER 270 C 500 - 200
This Arburg ALLROUNDER 270 C 500 - 200 injection moulding machine was built in Germany in the year 1995. It has 62371 production hours. This machine has a clamping force 500 kN, and a screw diameter 30 mm.[Ref: CH-INJ-ARB-1995-00001]
Plastics Plant
Netstal SYNERGY 1000-230 Netstal SYNERGY 1000-230
This Netstal SYNERGY 1000-230 Injection Moulding Machine was built in the year 1999. It has 101726 production hours. It can operate with a clamping force 1000 kN, an injection force 182 kN and an opening stroke 0 - 400 mm.[Ref:...
Plastics Plant
Netstal SYNERGY 1500 K 460 Netstal SYNERGY 1500 K 460
This Netstal SYNERGY 1500 K 460 Injection Moulding Machine was built in the year 1999. It is equipped with a NETSTAL SYCAP control unit. It has 82664 production hours. This machine can operate with a clamping force 1500 kN and an injection force...
Plastics Plant
Arburg ALLROUNDER 270 M 350 - 90 Arburg ALLROUNDER 270 M 350 - 90
This Arburg ALLROUNDER 270 M 350 - 90 injection moulding machine was manufactured in the year 1996 in Germany. It operates with an ARBURG MULTRONICA control unit. It has 54355 production hours. This machine can perform with a clamping force 350 kN,...
Plastics Plant
ENGEL e-motion 200/100 ENGEL e-motion 200/100
This ENGEL e-motion 200/100 injection moulding machine was built in 2007 in Austria. It has a total of 38913 production hours. It has a clamping force of 1000 kN, and a screw diameter of 25 mm. This machine is operated through a control unit of the...
Plastics Plant
Krauss Maffei 50 - 100 AX Injection Moulding Machine Krauss Maffei 50 - 100 AX Injection Moulding Machine
This Krauss Maffei 50 - 100 AX Injection Moulding Machine was manufactured in the year 2009. This machine has a total of 52733 power on hours, of which 49734 are production hours. It has an injection diameter of 25 mm.[Ref: DE-INJ-KRA-2009-00002]
Plastics Plant
DEMAG Ergotech Ergotech 110-200 System Injection Moulding Machine DEMAG Ergotech Ergotech 110-200 System Injection Moulding Machine
This DEMAG Ergotech Ergotech 110-200 System Injection Moulding Machine was made in 1997. It has been working for approximately 82000 hours. This machine can perform with a clamping force of 1100 kN.[Ref: SE-INJ-DEM-1997-00001]
Plastics Plant
DEMAG Ergotech System 110-430 Injection Moulding Machine DEMAG Ergotech System 110-430 Injection Moulding Machine
This DEMAG Ergotech System 110-430 Injection Moulding Machine was built in 1996. It has been working for approximately 80000 hours. This machine can perform with a clamping force of 1100 kN.[Ref: SE-INJ-DEM-1996-00001]
Plastics Plant
Krauss Maffei 1600-14700 MC  injection moulding machine Krauss Maffei 1600-14700 MC injection moulding machine
This Krauss Maffei 1600-14700 MC injection moulding machine was manufactured in 1997. The machine has a total of 130000 production hours. It has a clamping force of 16000 kN.[Ref: FR-INJ-KRA-1997-00001]
Plastics Plant
BMB KW28PI-2200 BMB KW28PI-2200
This BMB KW28PI-2200 Injection Moulding Machine is equipped with a SIEMENS SIJECT OP37 control unit. This machine has an injection pressure of 2000 bar and a clamping force of 2800 kN.[Ref: ES-INJ-BMB-2003-00001]
Plastics Plant
ENGEL V-Duo 2300 Injection Moulding Machine ENGEL V-Duo 2300 Injection Moulding Machine
This ENGEL V-Duo 2300 Injection Moulding Machine was manufactured in Austria in the year 2013. It has been working for only 1600 hours. It is equipped with a control unit of the same brand. This powerful machine incorporates a clamping force of...
Plastics Plant
HAITAIN HTF80XA injection moulding machine HAITAIN HTF80XA injection moulding machine
This HAITAIN HTF80XA injection moulding machine was manufactured in China in 2007. The machine has a clamping force 80 kN and an opening stroke of 310 mm. It has an injection pressure of 206 bar and a screw diameter of 34 mm.[Ref:...
Plastics Plant
Krauss Maffei 125 - 390 CX Injection Moulding Machine Krauss Maffei 125 - 390 CX Injection Moulding Machine
This Krauss Maffei 125 - 390 CX Injection Moulding Machine was built in 2006 in Germany. The machine has a total of 73698 power on hours, of which 70733 are production hours. It is equipped with a MC4 /with Pieker - Wittmann unit. This machine has...
Plastics Plant
This Krauss Maffei 130-1000 CX DUR Injection Moulding This Krauss Maffei 130-1000 CX DUR Injection Moulding
This Krauss Maffei 130-1000 CX DUR Injection Moulding Machine was built in the year 2017. It has 3000 working hours. This machine can work with a injection pressure of 2304 bar and a clamping force of 130 kN.[Ref: CH-INJ-KRA-2017-00001]
Plastics Plant
Battenfeld HM 60/130 S Injection Moulding Machine Battenfeld HM 60/130 S Injection Moulding Machine
This Battenfeld HM 60/130 S Injection Moulding Machine was manufactured in Austria in 2005. Operated through a Battenfeld Unilog B4 Control unit, this machine can work with a clamping force of 600 kN.[Ref: DE-INJ-BAT-2005-00001]
Plastics Plant
HAITAIN  Zhafir 410 Injection Moulding Machine HAITAIN Zhafir 410 Injection Moulding Machine
This HAITAIN Zhafir 410 Injection Moulding Machine was manufactured in the year 2013. This reliable machine can perform with a clamping force of 4100 kN and a screw diameter of 60 mm. It includes a Wittman robot, and a conveyor.[Ref:...
Plastics Plant
Arburg Allrounder 320 C / S 500-250 Vo Injection Moulding Arburg Allrounder 320 C / S 500-250 Vo Injection Moulding
This Arburg Allrounder 320 C / S 500-250 Vo Injection Moulding Machine was manufactured in 1999. This machine has a 500 kN Clamping force.[Ref: DE-INJ-ARB-1999-00001]
Plastics Plant
Krauss Maffei 1300-700-700-390-390 MZ Injection Moulding Machine Krauss Maffei 1300-700-700-390-390 MZ Injection Moulding Machine
This Krauss Maffei 1300-700-700-390-390 MZ Injection Moulding Machine was manufactured in Germany in 2003. This powerful machine incorporates 4 injection units with the possibiity to inject 4 different colours. A 3 axis robot is included.[Ref:...
Plastics Plant
Krauss Maffei 80-390 C2 Krauss Maffei 80-390 C2
This Krauss Maffei 80-390 C2 Injection Moulding Machine was built in Germany in the year 2002. It is equipped with a MC4 control unit. This machine operates with a clamping force 800 kN and a plate spacing 750 mm. Handling, cage and conveyor are not...
Plastics Plant
PARNAVAC VACUUM FORMING MACHINE (12395) PARNAVAC VACUUM FORMING MACHINE (12395)
PARNAVAC VACUUM FORMING MACHINE
Plastics Plant



Copyright MM Media Ltd registered in England No. 7838458 - Email us - Privacy policy